The All-in-One Presentation System with 8x4 4K60 4:2:0 HDMI/HDBaseT 2.0 Matrix Switching Controller from Kramer allows you to switch between six HDMI and two HDBaseT inputs, to two HDMI and two HDBaseT outputs at up to 10.2 Gb/s. The unit switches the video, embeds the audio, and outputs the signal with a USB extension and PoE on the HDBaseT output ports. The switcher supports balanced stereo audio, unbalanced stereo audio, and de-embedded audio sources that output to embedded audio, balanced stereo audio as well as a power amplified audio output.

The switcher features a master room controller that operates over Ethernet with control ports including a bidirectional RS-485, RS-232, IR, GPI/O, and relays to control a wide variety of AV devices. It supports a K-NET connector interface that enables access to the master controller from auxiliary room controllers such as control keypads. The unit can also provide power to auxiliary room controllers via the K-NET connectors. An Ethernet gateway is featured to control and manage remote input and output ports.

HDMI and HDBaseT Inputs/Outputs    Supports Balanced/Unbalanced Stereo    4:2:0 Sampling    Master Room Controller    K-NET Connector Interface    Ethernet Gateway    Ethernet for Remote Control

Audio volume control

HDMI, HDCP, and DVI compliant

Up to 328' at 4K UHD resolution (4:2:0)
Up to 430' at full HD (1080p/60)
Up to 590' at ultra-mode and full HD (1080p/60Hz)
Kramer cables recommended for optimum range and performance

USB 1.1 and USB 2.0 (up to 127 Mb/s) channeled through HDBaseT

Deep Color, 3D, 7.1 PCM

Kramer re-clocking and equalization technology rebuilds the digital signal to travel longer distances

Advanced EDID management per input

Active source and acceptor detection

Ethernet port via LAN
RS-232 serial commands transmitted by a PC, touch screen system, or other serial controller

Windows based control program with user-friendly configuration and upload to room controller over customer IP network.

Four balanced stereo audio inputs can also be configured as eight balanced mic inputs

Eight relays for control are featured

Four general purpose inputs/outputs (GPI/O) are featured

Remote control and management over IP network

Simultaneous IP control communication with up to 15 IP control clients

Auto-switching and auto-scanning of inputs

Audio breakaway and AFV (audio-follow-video) operation support

Global mute for video and audio outputs allowing easy integration of the audio system with a public announcement audio system in case of an emergency event

Ethernet-based firmware upgrade via a user-friendly software upgrade tool

Kramer protocol 3000 support

Non-volatile memory for retaining the last settings, after switching the power off and then on again

Related Questions and Answers

Q: 1. Does this come with rack mount?

A: It does not. Have Kramer does offer the RK-1 19-Inch Rack Adapter, B&H # KRRK1, for this product. https://bhpho.to/2WvYaJC

Q: 2. Will this work with a video camera 1080P 60fps output including 2 channel audio?

A: Yes, and will support UHD 4K60 (3840 x 2160).

Q: 3. Can a single source send the signal into the two output channels?

A: Yes. A single source may be routed to two displays/outputs.

Q: 4. This lists a bracket as an accessory, is this fully mountable in a 19" equipment rack with the hardware included?

A: Yes, the MuxLab 4K60 HDMI 8 x 8 Matrix Switcher will be able to be mounted to an equipment rack with the included bracket.

Q: 5. Does it support 4K at 60Hz?

A: Yes, this will support 4k@60Hz.

Q: 6. Would this unit have 1 IR receiver and 8 IR transmitters? The 1 IR receiver would receive the remote control signal and the 8 IR transmitters would transmit/output the repeated IR signal to each connected video display.

A: Yes, 1 receiver and 8 transmitters.

Q: 7. Does it display signal loss or other message upon switching?

A: Could you be more specific in your question? What do you mean?

Q: 8. Can you display 4 different outputs? Like watch 4 different football games on each tv.

A: No, The BZBGear 2x2 4K60 HDMI Video Wall Controller with Audio has only one input and would only support one input signal. However, This HDMI 4 x 4 would allow you to have 4 input sources and be able to output to 4 Televisions. MuxLab 4x4 4K60 HDMI Matrix Switch BH #MU100508 https://bhpho.to/3GxJoM9

Q: 9. Can one source send the signal to the two output channels?

A: A single source may be routed to two displays (two outputs).

Q: 10. Will this pass 144Hz at 1440p?

A: unit offers the following transmission bandwidths Video Format HDMI UHD 4K: 60 fps Bandwidth 25 MHz to 600 MHz