You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Hedbox Rp-dc50 Digital Lcd Dual Battery Charger Kit With Rp-dfz100 Battery Plates

Hedbox Rp-dc50 Digital Lcd Dual Battery Charger Kit With Rp-dfz100 Battery Plates
  • Product Code: ga65529
  • Availability: In Stock

$195.00 $263.25

The Hedbox RP-DC50 Digital LCD Dual Battery Charger Kit with RP-DFZ100 Battery Plates is a two-bay solution that safely charges your batteries while providing a 2.1A, 5 VDC USB output. Two Sony NP-FZ100-compatible battery plates are included in this kit. Charge either a single battery, or simultaneously charge two batteries in less time that it takes to charge both individually. The dual-bay charger features interchangeable battery plates, which is helpful when you have more than one battery type in your kit. The backlit display shows battery charge status in both bays, and since it is backlit you can easily see the readout in bright or dim conditions.

The charger supports both standard and boost charging, with boost providing roughly 1.5x as much charging amperage for faster charging. A built-in 2.1A USB power port provides you with the opportunity to charge USB accessories. The charger features overcharge and overheating protection, as well as being able to test for short circuits within the battery itself.

Sony NP-FZ100-Type Plates Included    Simultaneously Charge Two Batteries    Interchangeable Battery Plates    Large Backlit LCD Display Screen    Standard and Boost Charge Modes    2.1A USB Power Output    Overcharge, Overheating Protection    Short-Circuit Protection

Parameters
Battery Bays2
Display ScreenBacklit LCD
PowerAC Input: 110 to 240 V, 50/60 Hz
DC Input: 12 to 24 V
Consumption: 55 W (Max)
Output Bay 1: DC 8.4 to 16.8 V / 1500 mA Boost Power / 800 mA Standard
Output Bay 2: DC 8.4 to 16.8 V / 1500 mA Boost Power / 800 mA Standard
USB Output: 5 V, 10 W, 2.1 A (Max)
EnvironmentOperating Temperature: 32 to 104°F / 0 to 40°C
Storage Temperature: -4 to 122°F / -20 to 50°C
DimensionsCharger: 4.72 x 4.33 x 3.94" / 12.00 x 11.00 x 10.00 cm
Battery Plate: 2.48 x 2.01 x 0.43" / 6.3 x 5.1 x 1.1 cm
WeightCharger: 7.69 oz / 218 g
Battery Plate: 0.88 oz / 24.95 g
Packaging Info
Package Weight1.1 lb
Box Dimensions (LxWxH)10.3 x 8.3 x 4.6"

The RP-DC50 charger can support two different battery plates at the same time. This allows you to mix and match the batteries. For example, you can charge one L-series battery at the same time you are charging an LP-E6 battery.

The LCD screen provides a clear display of the charging status, and the backlight enables reading the display even in the dark.

Intelligent charging systems such as Constant current/constant voltage (CC/CV) charging mode where the charger CPU automatically adjusts charging current to be lower than the max charging current that the battery can accept to protect the battery from being overcharged. Intelligent Control MCU can automatically identify the voltage and number of batteries that are on the charger, and prevent overcharge depending of the charging mode that is selected.

Boost Charging is available at the push of a button to engage a high-speed charging mode. In standard charging mode the current power is 1A per one slot and 0.5A for both slots. In high-speed charging mode, the charger provides 1.5A current per one battery slot or 0.8A for both battery slots. When Boost mode is activated the Boost icon will be displayed. Please note that Boost mode is only recommended for use with batteries that have internal overcharge/overheating protection.

The charger will automatically adjust its charge voltage to match the attached batteries.

The charger can be powered by the included AC adapter, or the included car lighter power cord. Please note that to charge 14 VDC batteries (or higher), you need to power the charger via the AC power cord.

Please note that the USB power port is only active when the charger is in standard mode, and it is disabled when the charger is in Boost mode.

Related Questions and Answers

Q: 1. Is this compatible with the Panasonic CX350 and will charge on the Panasonic charger AG-BRD50?

A: Yes, The Panasonic CX350 Camera will work with VBD style batteries like the Hedbox RP-VBD78 Lithium-Ion Battery Pack. It will also charge using the Panasonic AG-BRD50 charger.

Q: 2. Can I use the Induro PU-50 Slide-In Quick Release Plate with this D screw?

A: This screw can only be used with Oben RP plates.

Q: 3. 1) Will this charger charge the OEM batteries fully, and 2) will these batteries charge in the OEM charger? Some 3rd party batteries won't.

A: Yes, the Watson Duo LCD charger will fully charge OEM batteries, and Watson batteries will charge in the OEM charger.

Q: 4. Is this compatible with the panasonic hc-x2?

A: The Hedbox RP-VBD78 Lithium-Ion Battery Pack (7.2V, 7800mAh) is not compatible with the Panasonic HC-X2.

Q: 5. What is the length of the stem (threaded & unthreaded portion from tip to underside/shoulder of the head)? QRS-14D = 7.5 mm (from Q on its page) RPS-14D = ? mm

A: The length of the threaded portion of the Oben 1/4"-20 Screw with D-Ring for RP Plates is 7.1mm, whereas the length of the unthreaded portion is 4.3mm.

Q: 6. I need the charger with 2 plates for KLIC7004, is possible?

A: There are currently no plate options available for the KLIC-7004 type battery to match your dual Hedbox charger... We do have a plate https://bhpho.to/2WyUZC1 that is compatible but only when used with the appropriate battery charger, which would be as follows: https://bhpho.to/2SFmVCX

Q: 7. Is there a longer version of this screw? I have a camera with recessed threads, and this screw (that came with my tripod) doesn't reach them.

A: This is a longer screw but if it is too long the camera might not fit well.

Q: 8. How long does it take to charge two batteries at once?

A: If in fast charging most it should take around 2.5 to 3 hours to fully charge a pair of empty NP-FZ100 batteries.

Q: 9. Can someone measure the width of the d-ring for me? I need something to replace the coin screw on my Vanguard QS-39 plate and it is a tight space. Thanks.

A: The ring is about 1/2".

Q: 10. Is this compatible with olympus pen epl7?

A: Apologies. Do not own the Pen so have no idea

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Bowens Xmt Battery

$419.64 $642.05

Jupio Tri-charge For Panasonic Dmw-blk22

$389.85 $600.37

Sony Hv Battery Charger

$48.00 $65.28

Sony Bc-vm10 Battery Charger

$169.41 $255.81

Fenix Flashlight Are-a2 Battery Charger

$74.85 $108.53

Products You May Like

Pgytech Tablet Holder V2

$47.88 $62.24

Pelican 4-piece Foam Set For 1507air Case

$188.85 $237.95

Skb 5fc-2217-8 Iseries Cubed Foam

$299.97 $365.96

Camgear Sb-mark Soft Tripod Bag

$315.00 $437.85

E-image Quick Release Adapter With Plate

$179.97 $230.36