The CAMVATE 15mm Rod Clamp to ARRI Rosette Mount features an L-shaped design with an ARRI M6 threaded rosette mount on one end. It's designed to attach to a single 15mm rod to support a rosette-mount handgrip. It also has multiple 1/4"-20 threaded holes on the interior side of the rosette mount.

L-Shaped Design for Rosette Handgrips    ARRI M6 Threaded Rosette Mount

Related Questions and Answers

Q: 1. Can this unit be used to power the Canon C300 mkii?

A: It is possible to power a C300 Mark II with this unit, however you will need to also purchase the proper cable to connect to the C300 Mark II. The Core SWX D-Tap to LEMO Power Cable for C300 Mark II (24") is a great option, B&H # COPTC3MK2. https://bhpho.to/2UIv7Vl

Q: 2. Does this come with a 1/4-20 bolt? It says it "Requires 3/8"-16 or 1/4"-20 Bolt". But I specifically need the latter.

A: 1/4"-20 and 3/8"-16 bolts are not included with the Kondor Blue ARRI-Style 3/8"-16 Pin to 15mm Rod Clamp (Raven Black), however if you have a 1/4"-20 bolt to use with the clamp it will support the 1/4"-20 bolt as a mounting method. The bold will go through the clamp and come out the end with the anti-twist pins. Then a 15mm rod would enter the open end on the opposite side where it would then be clamped into place.

Q: 3. Is it safe to power a BMPCC 4K?

A: Yes it is, just as long as you have the proper D-Tap cable for the Pocket Cinema Camera 4K. B&H # INDTBP4K is a great option from IndiPro Tools that will work. https://bhpho.to/2v0uzvp

Q: 4. Does anybody know why this device would only flash green with a Battery or USB-C hooked to it? No power delivery out to devices.

A: The SmallRig V-Mount Battery Adapter Plate with Dual 15mm Rod Clamp (BH # SM3203B) flashes green to indicate that power is connected.

Q: 5. how do i get this on to a tripod?

A: You can either use a tripod that is compatible with the Manfrotto-Style Quick Release Plate or attach a tripod plate to the bottom of the CAMVATE Manfrotto-Style Quick Release Plate with 15mm Dual-Rod Clamp Base.

Q: 6. Can I put a ronin S plate on this?

A: A Ronin S plate will fit on a Manfrotto 501 style quick release (which is featured in the CAMVATE Manfrotto-Style Quick Release Plate), however width of the Ronin S plate is slightly less than a Manfrotto style and may not full lock into place. Please also note that even though the Ronin S plate can fit on a Manfrotto style quick release, a Manfrotto style plate will NOT fit on a Ronin S.

Q: 7. is this (or similar) item available for different rods diameters (from 26 to 32)?

A: HiThis part is made specifically for 15mm rod system.

Q: 8. Is the rosette 31.8mm arri or 28mm arri also can these be split up and added to rods and used to attach 2 handles?

A: It should work, but in that case you will need to acquire another screw. The 2 screws will be used to thread into the M6 on your rosette handles and tighten the rod clamps. You will need to call B&H and request a special order of this with extra screw.

Q: 9. Can I use this to mount a Kondor Blue d-tap hub splitter onto a 15mm rod?

A: No, the Kondor Blue 15mm Rod Clamp to Accessory Mount (Space Gray) would not connect to the Kondor Blue Male D-Tap to 4-Port Female D-Tap Splitter Hub. One solution would be a Magic Arm. BH #KOKBMGCARMBK and replacing one of the ends with a 15mm BH #KOB15BALL. Many customers also work with this NATO clamp to attach it to a NATO Rail on their cage or rig. Kondor Blue Anti-Twist NATO Clamp (Space Gray) BH #KOKBNATOCAT. You could also work with the following Wooden Camera Universal 15mm Rod Clamp (1/4"-20) BH #WOA00131

Q: 10. Many Tilta rosettes have smaller diameters than Arri. Other than the crops at the top/bottom, is it a full-size "Arri" rosette?

A: The key word in the listing is "ARRI." Regarding the Tilta NATO Clamp to ARRI Rosette Adapter and any other rosette with the name ARRI attached to it, will be 100% ARRI standard.