The SHAPE Mixed 1st AC Camera Cable Kit features an assortment of 12 cables in a compact dual-sided carry case. There are four ultra-slim BNC cables of different lengths, three coiled HDMI cables, two coiled LANC cables, and three D-Tap cables, two of which are coiled and one is a splitter.

The BNC cables are only 0.1" (2.5mm) thick and have right-angle connectors on both ends. They're 3G-SDI rated and feature a 75-ohm impedance. The HDMI cables each have a type A connector on one end and a different-sized connector on the other end. One of the D-Tap cables has a 4-pin XLR female connector on the opposite end for connecting D-Tap power sources to devices with 4-pin XLR power ports. The D-Tap splitter cable splits a male D-Tap into four female D-Tap connectors.

The compact carry case is 10" wide and shallow on one side and deeper on the other. It holds the cables on both sides via elastic loops while providing the space for various chargers, batteries, mics, light meters, and other accessories on the deeper side. Both sides open and close via zippers.

4 x Ultra-Slim BNC Cables (24, 12, 6")    0.1" Thick / Right-Angle BNC Connectors    3G-SDI Rated / 75-Ohm Impedance    3 x HDMI Coiled Cables    2 x LANC Coiled Cables    1 x D-Tap to 4-Pin XLR Coiled Cable    1 x D-Tap Coiled Cable    1 x D-Tap Splitter Cable    Dual-Sided Case, Also Fits Accessories    HDMI to HDMI Type A, Mini, Micro Ends

• 24" blue BNC cable
• 24" black BNC cable
• 12" green BNC cable
• 6" red BNC cable
• 0.1" (2.5mm) thickness
• 3G-SDI rated, 75-ohm impedance
• Right-angle male connectors on both ends

• 24-36" HDMI type A coiled cable
• 24-36" HDMI type A to mini-HDMI coiled cable
• 24-36" HDMI type A to micro-HDMI coiled cable

• 10 to 20" LANC right-angle male to LANC female coiled cable
• 11 to 20" LANC right-angle male to LANC male coiled cable

• 18 to 48" D-Tap to 4-pin XLR coiled cable
• 10 to 30" D-Tap coiled cable (male/male)
• D-Tap splitter cable (male to 4-female)

• 10"-wide, dual-sided case with elastic cable loops on both sides; both sides are zippered
• One side of the case also fits various chargers, batteries, mics, light meters, and other accessories

Related Questions and Answers

Q: 1. is this the same model as the extension arm for the Sony FS7?

A: There is only a cosmetic difference.

Q: 2. This may seem counter-intuitive. While I know I can use a cable with Canon cameras, I would still like to use the IR accessory not the cable. Some Canon cameras do have that option. Canons are not listed among the compatible cameras but I suspect the listi is not really for the compatible camera list, but the cameras that would HAVE to use the IR.So: can I use the IR accessory with a IR capable Canon camera ? Thanks !

A: While I was unable to find definitive information, what I came away with is that if your camera can be tripped by IR, this will work. However, as former motion picture camera assistant I would hasten to recommend using the hard wire set up as being more reliable.

Q: 3. Will this work with a Flanders 9" BM090 Monitor?

A: Yes, The SHAPE Wireless Director's Kit is a universal solution that would support the Flanders 9" BM090.

Q: 4. Hey will this work with the remote included with the Fx-6?

A: Hello John, Thank you for your question! Actually, we did release our FX6RH about 2 weeks ago, here is the link for it: https://www.shapewlb.com/sony-fx6-remote-extension-handle-and-cable/. We hope this helps and we thank you for your interest in our products. The SHAPE team

Q: 5. Does this work with the new BMPCC 6K Pro as well?

A: No it does not. the 6K pro is a different shape from the Pocket Cinema 4K and original 6K cameras. The Pocket 6K Pro will not fit in the cage that comes in this kit.

Q: 6. Does this product have a humidity and temperature controller (the newer version of the same product) or just the temperature controller (the older version)?

A: A Thermal Probe is Included. CLOUDLINE T4, QUIET INLINE DUCT FAN SYSTEM WITH TEMPERATURE AND HUMIDITY CONTROLLER, 4-INCH: Designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. Intelligent controller with temperature and humidity programming, fan speed control, timer, and alarm system. Mixed flow design combined with a PWM-controlled DC-motor for a truly quiet and energy efficient performance. Kit also includes corded sensor probe, AC power plug, two duct clamps, and required mounting hardware. Duct Size: 4” | Dimensions: 6.9 x 11.9 x 7.4 in. | Airflow: 205 CFM | Noise: 28 dBA | Bearings: Dual Ball

Q: 7. Does this model include Bluetooth for app control?

A: The AC Infinity CLOUDLINE T6 Inline Mixed-Flow Duct Fan System (6") BH #ACAICLT6V2 does not have bluetooth control.

Q: 8. Which phones does this work with? iPhones? Android?

A: It works with both iPhones and Android phones.

Q: 9. Does this work with an A7 Mk II?

A: It works fine with the Sony A7s. Should also work generel with Sony Cameras. Subject not on the IR Controller. The settings are in the SYRP genie!

Q: 10. How do I check on the status of my order?

A: Logging into your account, you would be able to view this under order history. Or you can reach out to our customer service team at cs@bhphoto.com, or during normal business hours at 800.606.6969 / 212.444.6615