Convert DVI to HDMI or de-embed HDMI audio with the 4K HDMI/DVI to HDMI Converter with Audio De-Embedder from ATEN. The switch supports video resolutions up to 3840 x 2160 and is HDCP 1.4 compliant. For the HDMI audio de-embedding function, the VC881 splits the audio from the HDMI video and converts it to an S/PDIF, coaxial, or a RCA stereo audio signal to support an audio system that is separate from the display. This allows HDMI video to continue to the display while supplying audio to an audio system near the HDMI source. In addition, the VC881 supports ARC to simplify the setting by eliminating the need for any separate S/PDIF audio connection.

Converts DVI to HDMI    De-Embeds HDMI Audio    Audio Return Channel    HDMI: Up to 3840 x 2160 at 30 Hz    DVI: Up to 1920 x 1200    HDCP 1.4 Compliant    Mode Selection via Push Button    Power Status LED    Firmware Upgradable    All-Metal Casing

DVI to HDMI, HDMI audio de-embed, and ARC modes

Easy mode selection via push button

Supports HDMI 1.4 (3D, Deep Color, 4K)

HDCP 1.4 compliant

Up to UHD 4K HDMI resolution (3840 x 2160 at 30 Hz)

Up to 1920 x 1200 DVI resolution

HDMI audio stream can be extracted and converted to S/PDIF, coaxial, or a RCA stereo audio signal

LED indication of power status

Firmware upgradable

All-metal casing

Suitable for use in bars, public transportation stations, and home theater settings

Related Questions and Answers

Q: 1. So this device will add mic audio to the existing HDMI audio and combine both audio's in the HDMI output?

A: The MuxLab 4K HDMI 2.0 Audio Embedder can intake audio from the HDMI input, TOSLINK S/PDIF Input, or the 1/8" / 3.5 mm Aux/Line Input, and then merge it with the HDMI output.

Q: 2. Will output the extracted audio to both the optical and L/R out at the same time? I want to pass the audio to headphones and a hearing aid broadcaster at the same time.

A: Yes. Audio format must be set for 2ch top accommodate both audio at sometime.

Q: 3. Does this Downmix to 2 channels or can you choose which 2 channels it outputs?

A: Unfortunately this product does not give you the option to choose which channels it outputs. It will mix everything together.

Q: 4. Will this output 1080p 120hz on my ps5?

A: No, this is an extractor that will only support the following video compressions 4K2K @ 50/60 Hz (YUV 4:4:4) 4K2K @ 30 Hz 1080p @ 120 Hz 1080p 3D @ 60 Hz

Q: 5. Will this embed the audio signal into a video signal if an audio signal is not already present?

A: Yes.

Q: 6. is it anamorphic or can you take a 1080 16x9 and do a 4x3 cut?

A: If the inputted HDMI signal is 16x9 it should output the video to 4x3 with letter boxing on the top and bottom.

Q: 7. Will the audio output level change with signals received from the connected ARC device? I want to avoid a second remote.

A: The Audio levels should not change. The MuxLab HDMI 2.1 48 Gb/s Audio De-Embedder does support ARC.

Q: 8. Are the eight rca outputs analog or only digital?

A: 7.1 channel audio line-out (RCA x 8) - rear. They are analog.

Q: 9. Will this embed the audio signal onto the HDMI without a video signal present?

A: A video signal must be present when using the KanexPro 4K HDMI 2.0 Audio Embedder.

Q: 10. Will this device successfully output sound via optical out to my DACmagic plus from Cambridge Audio? I am planning on connecting this device with either the new apple tv 4k or roku ultra. I will use my Rega Brio analog only integrated amplifier for 2 channel audio. Many thanks for your guidance.

A: Hi Jacques. While we haven't tested the OMX-05HMHM0001 with the DACMagic unit specifically, we don't foresee any issues. You should be able to connect the TOSLINK output of the OMX-05HMHM0001 right to the input of our DACMagic Plus unit and the extracted audio signal should pass without issue as long as the DACMagic supports the audio format being output. Thank you!