Hdmi Switch Lan Control

Aten 4 X 4 True 4k Hdmi Matrix Switch

Product Code: ga65962
Availability: In Stock

$2,455.50 $3,904.24

Qty

0 reviews Write a review

Description
Reviews (0)

Route any of four HDMI video sources to any of four HDMI displays with the 4 x 4 True 4K HDMI Matrix Switch from ATEN. Supporting video resolutions up to 4096 x 2160 at 60 Hz (4:4:4), this switch is well suited to applications where routing of True 4K digital signals is required, for example at event venues, digital classrooms, auditoriums, department stores, and more.

The intuitive GUI design of the matrix switch allows you to flexibly configure any input to output connections, eliminating the need of frequent physical configuration changes. In addition to the built-in web GUI, the switch can be operated via the front-panel push buttons, IR remote (included), RS-232 control, or Telnet via Ethernet connections.

Route Any Input to Any Output Up to 4 Inputs / 4 Outputs Up to 4096 x 2160 at 60 Hz (4:4:4) Front-Panel Buttons Control Intuitive GUI Design Control via IR Remote / RS-232 / Telnet EDID Expert Technology Dolby True HD & DTS HD Master Audio HDCP 2.2 Compatible 1 RU Rackmount Design

Video Input
Interfaces	4 x HDMI Type A Female (Black)
Impedance	100 Ohms
Maximum Distance	4K at 60 Hz (4:4:4): 5.9' / 1.8 m
Video Output
Interfaces	4 x HDMI Type A Female (Black)
Impedance	100 Ohms
Max Distance	4K at 60 Hz (4:4:4): 9.8' / 3 m 1920 x 1200: 49.2' / 15 m
Video
Maximum Data Rate	18 Gb/s (6 Gb/s per Lane)
Maximum Pixel Clock	600 MHz
Compliance	HDMI (3D, 4K, Deep Color) HDCP 2.2 Compatible Consumer Electronics Control (CEC)
Maximum Resolution	4096 x 2160 / 3840 x 2160 at 60 Hz (4:4:4)
Control
RS-232	Connector: 1 x DB-9 Female (Black) Baud Rate: 19200 Data Bits: 8 Stop Bits: 1 Parity: No Flow Control: No
IR	1 x Mini Stereo Jack Female (Black)
Ethernet	1 x RJ45 Female
EDID Settings
EDID Modes	Default / Port 1 / Remix / Customized (EDID Wizard Support)
Power
Connectors	1 x 3-Prong AC Socket
Maximum Input Power	100-240 VAC, 50-60 Hz, 1 A
Consumption	At 110 VAC: 17.8 W, 83 BTU At 220 VAC: 17.6 W, 83 BTU
Environmental
Operating Temperature	32 to 104°F / 0 to 40°C
Storage Temperature	-4 to 140°F / -20 to 60°C
Humidity	0 to 80% RH, Non-Condensing
Physical
Housing	Metal
Rackmount Space	1 RU
Dimensions	17.2 x 6.4 x 1.7" / 43.72 x 16.28 x 4.40 cm
Weight	5.4 lb / 2.47 kg

Connects any of four HDMI sources to any of four HDMI displays

Supports True 4K resolutions up to 4096 x 2160 at 60 Hz (4:4:4)

Multiple control methods—system management via front-panel push buttons, IR remote, RS-232 control, and Web GUI/Telnet via Ethernet connections

EDID Expert technology selects optimum EDID settings for smooth power-up, smoother switching between displays, and optimized display resolution throughout your installation

Signaling rates up to 6 Gb/s for flawless true 4K output

Supports Dolby True HD and DTS HD Master audio

HDMI (3D, Deep Color, 4K) and HDCP 2.2 compatible

Supports Consumer Electronics Control (CEC)

ESD protection for HDMI

Supports separately available LockPro HDMI cable lock for secure HDMI cable connections

Firmware upgradeable

1 RU rackmount design

Related Questions and Answers

Q: 1. Does this work with a computer that only supports one external monitor? My mac will not run dual external monitors.

A: The Ocean Matrix UHD 4K HDMI 2x2 Video Wall Processor has a single HDMI Output that would enlarge that HDMI output to multiple screens. The Ocean Matrix UHD 4K HDMI 2x2 Video Wall Processor would not allow you to see multiple screens from a Mac. But it would work with your Mac HDMI output and expand that output to multiple screens for a large image of what you are outputting from the Mac.

Q: 2. Hi, will this work in the following sequence:source matrix av receiver cat6 balun transmitter cat6 receiver balun tvi guess i ask specifically with regard to the EDID management? will it still work when there is the cat6 section in the middle?

A: I am using it with a cat6/HDMI extender: this device a href= http://www.bhphotovideo.com/c/search?N=10944805&InitialSearch=yes&sts=pi target= _blank http://www.bhphotovideo.com/c/search?N=10944805&InitialSearch=yes&sts=pi/a

Q: 3. Does this support Atmos?

A: Yes, the Avenview 1x4 HDMI True 4K60 Splitter with EDID supports Dolby Atmos.

Q: 4. Does this product simply mirror one of the 6 sources to both displays? Or is it a true matrix, in that you can assign one source to the first display and a different source to the second display?

A: This is a true matrix switcher. It has 2 assignable and independent HDMI outputs.

Q: 5. What is the frame rate?

A: The ToolBox 6x2 offers 4K frame rates at up to 30fps and HD at up to 60fps.

Q: 6. If I plug this in line of my projector will it prevent the projector from seeing a loss of connection when switching inputs on a switcher?

A: There's a very good chance that this will work for you if your projector is EDID compliant. But HDMI switching is rarely seamless.

Q: 7. can the inputs be used for 4 camcorders and can be switched in vmix?

A: We're afraid not, this is a 4 x 4 PCI HDMI Matrix Switch not a capture device. It does not have video capture capabilities. For a quad HDMI card that will work with vMix we recommend the Magewell Pro Capture Quad HDMI Card (4-Channel), B&H # MA400DEHDMI, instead. https://bhpho.to/2bE2GRV

Q: 8. Does it work with vmix?

A: Yes.

Q: 9. Can I expect seamless switching from this product?

A: No, this box does not provide seamless switching.

Q: 10. Are powered switches like this more reliable than passive switches?

A: The IOGEAR 3-Port True DCI/UHD 4K HDMI Switch will be very reliable. But if you compare it with a button-based HDMI switch, like the model below from Kramer, it would be a more reliable, better-quality switch. Kramer SWT3-41-H 4x1 4K60 HDMI Switcher BH #KRSWT341H

There are no reviews for this product.