The Flowline 600N Professional Ergonomic Camera Support Vest from FLYCAM is a body-worn vest support system that is adjustable to support camera rigs weighing 26.4 to 33 lb. The system works by using a suspension line to support the weight of the gimbal rig, taking the load off your shoulder, neck, and arm muscles, and distributing it across your torso.

The tension line is adjustable by turning a screw on the top bar, letting you dial in the appropriate amount of tension for your rig. The system consists of the vest, a support bar, a line tightening knob, and an 18.5" top bar with a 5" support arm extension. The vest is adjustable for hip sizes from 34 to 56", and it is optimized for use with motorized gimbal stabilizers, providing increased lower back support that allows you to carry weights further away from your body. A carrying bag is also included for convenient storage and transport of the Flowline 600N system.

Reduces Strain on Arms, Neck & Shoulders    26.4 to 33 lb Load Capacity    18.5" Top Bar with 5" Arm Extension    Adjustable Line Length, 42" Maximum    Vest Fits Variety of Body Sizes    Carrying Case

• 26.4 to 33 lb load capacity
• Heavy-duty camera hook
• Tightening knob to adjust line length
• Line extends to 42" when fully stretched
• Adjustable vest and waist belt made of breathable fabric

Related Questions and Answers

Q: 1. Is the placid arm already affixed to the vest & system. I'm asking so I wouldn't have to do it myself

A: The FLYCAM Flowline Starter Support Vest and Spring Arm is simple process to assemble and you would need to mount the Placid arm. Please see this manual for installation. https://bit.ly/3D9ONVV

Q: 2. is there a way to shorten the top bar so the cable comes down closer to the shoulder?

A: Yes, FLYCAM Flowline Master has an extension bar in front. You can remove the bar, thus shortening the top bar so the cable comes down closer to the shoulder. Here is a video link provided by Proaim https://bit.ly/3JVGAbj

Q: 3. Is the height adjustable?

A: Yes, the height can go between 23.62 to 39.37".

Q: 4. Page 8 of the user manual shows that the rope comes down to at least chest level. How do I do that? There's no tension screw.

A: The rope on the FLYCAM Flowline 500N Professional Ergonomic Camera Support Vest (BH #FLCMFLN500N • MFR #FLCM-FLN-500N) will reach chest level once you add the recommended camera weight/payload of 22 to 26.4 lbs.

Q: 5. Would this work on a Movi pro ?

A: Yes, the FLYCAM Flowline Master Stabilizing Support Vest for Camera Gimbals can clamp the FREEFLY MōVI Pro Essentials Bundle, but the arm length on the FLYCAM doesn't protrude enough to distance the gimbal from the body to make it that comfortable of an operating experience.

Q: 6. Hi, I want to replace the clamp with a more solid option. Any recommendations?

A: We are not aware of any other "clamps" that would work with this product. These are especially designed to work fluidly and with the weight specifications defined. Any changes to that layout would alter the operation of the unit.

Q: 7. Belt or waist size is about 34" inches minimum at stays in specs. My waist is about 31" inches. Would I be losing a tight fit?

A: Yes, The minimum waist size is 34" for the FLYCAM Flowline Master with Pro Vest for Camera & Gimbals the fit would be very loose with your waist size.

Q: 8. How do you adjust the tension on the suspension line for this specific model such as 33lbs to 41lbs?

A: There is no adjustment knob on the FLYCAM Flowline. The FLYCAM Flowline Master and Easyrig Minimax will allow you to adjust the spring tension.

Q: 9. The rugged rubber in the post behind his neck is a suspension system or is just a cover?

A: The rubber cover on the vertical section of the bar of the FLYCAM Flowline 600N Professional Ergonomic Camera Support Vest (B&H# FLCMFLN600N) covers a connection between the upper and lower portions of the bar where the angle of the horizontal section of the bar may be adjusted. It is just a cover.

Q: 10. Hello! My camera is a Blackmajick 6G2 , my cage for my camera is TILTA cage handle I want to buy this support bar and I would like to know if the can fit very well

A: Yes, the FLYCAM Flowline's lockable camera hook can attach to any handle and will fit on your setup.