The Flowline Master Stabilizing Support Vest from FLYCAM is a body-worn vest support system that is adjustable to support camera rigs weighing 8.8 to 26.5 lb. The system works by using a suspension line to support the weight of the gimbal rig, taking the load off your shoulder, neck, and arm muscles and distributing it across your torso.

The tension line is adjustable by turning a screw in the back, letting you dial in the appropriate amount of tension for your rig. The system consists of the vest, a support bar, an anti-slip ratchet knob, and a 17" top bar with a 5" support arm extension. The vest is adjustable for hip sizes from 32 to 49", and it is optimized for use with motorized gimbal stabilizers, providing increased lower back support that allows you to carry weights further away from your body. A carrying bag is also included for convenient storage and transport of the Flowline Master system.

Reduces Strain on Arms, Neck & Shoulders    8.8 to 26.5 lb Load Capacity    17" Top Bar with 5.5" Arm Extension    Adjustable Line Tension    Vest Fits Variety of Body Sizes    Carrying Case

• 8.8 to 26.5 lb load capacity
• Adjustable line tension for different cameras and configurations
• Lockable camera hook
• Anti-slip ratchet knob to adjust tension
• Line extends to 60" when fully stretched
• Adjustable vest and waist belt made of breathable fabric

Related Questions and Answers

Q: 1. Is the height adjustable?

A: Yes, the height can go between 23.62 to 39.37".

Q: 2. Height Adjustment up and down

A: The line of the FLYCAM Basic Flowline Stabilizing Support Vest with 180° Rotation will allow you to lower the payload you are working with to ground level. The line is tensioned and will retract.

Q: 3. hi...will the placid arm work as an stabylizer? thanks

A: Yes it will. The FLYCAM Flowline Placid Two-Axis Spring Arm. It is well suited to help create smooth walking or running shots, the Flowline Placid supports cameras and rigs from 11 to 44 pounds and works to help minimize both vertical and side-to-side vibration.

Q: 4. Is this the FLCM-FLN-MSTR-03 version ?

A: The Flowline Master 2 Professional Support Vest for Cameras & Gimbals, is MFR SKU: FLCM-FLN-MSTR-02. For FLCM-FLN-MSTR-03, please see the following link: https://bhpho.to/3yeh243

Q: 5. what if I will use it with more weight (8kg or 9kg) than it supports? It's possible or what's the risks?

A: According the manufacturer the Flycam Basic Flowline Stabilizing Support Vest with 180° Rotation, should only be used with weight loads of up to 7.5 kg, for proper functionality. For more weight support, we recommend the FLYCAM Flowline Master Stabilizing Support Vest for Camera Gimbals: https://bhpho.to/3KYFQo5

Q: 6. is there a way to shorten the top bar so the cable comes down closer to the shoulder?

A: Yes, FLYCAM Flowline Master has an extension bar in front. You can remove the bar, thus shortening the top bar so the cable comes down closer to the shoulder. Here is a video link provided by Proaim https://bit.ly/3JVGAbj

Q: 7. Does it support RS 3 Pro with Blackmajick 6KG2 and TILTA cage ??

A: Yes, the FLYCAM Flowline Starter Support Vest and Spring Arm can support an RS3 Pro, Blackmagic 6KG2, and Tilta Cage.

Q: 8. Is it possible to lock the support arm so that I wouldn't be moving?

A: On this device the hook may be locked at the end of the support arm.

Q: 9. is it suitable to use it with a camera setup less than 6.6 Ib ?

A: No, the FLYCAM Basic Flowline Stabilizing Support Vest with 180° Rotation will not work effectively with cameras/camera rigs that weight less than 6.6lbs.

Q: 10. Is there an option for 30" inches or less of waist?

A: The FLYCAM Flowline Master with Pro Vest for Camera & Gimbals (9-27 lb) (B&H# FLCMFLNMSTR3) is only recommended for persons with a waist size of 34.3-55.9" (87-142cm). However, you may want to consider the FLYCAM Galaxy Arm and Vest Stabilizer (B&H# FLGLXYAV) as it can fit on waists 28-60" (71-152cm): https://bhpho.to/35eLb8w