The Anderton Dolly Pin from Cardellini is a 5/8" Baby pin to 1" post adapter. Designed to lock into a dolly's 1" seat post or push bar receiver, this pin can be used to mount a flag or net, to secure your camera for a locked-off shot, or to link two dollies together on a single track.

5/8" Baby Pin to 1" Post Adapter    Fits Dolly Seat & Push Bar Receivers    Locks into Receiver    Use to Mount Accessories    Use to Link Two Dollies Together    Use to Immobilize Camera Rig    Aluminum & Stainless Steel

Related Questions and Answers

Q: 1. Is the pin removable?

A: The pin is welded in place.

Q: 2. What is the max weight this clamp can hold?

A: The manufacturer says there is no warranty or guarantee for the load limits of the Matthews C - Clamp with 2 Baby Pins - 10" BH #MACC1058.

Q: 3. Can this C clamp be mounted securely to a round pipe?

A: Yes, the Matthews C - Clamp with securely adapt to round pipes.

Q: 4. what is the distance between the holes?

A: The large Outside holes are 6 centimeters by 13 centimeters on center. The small Inner holes are 4 centimeters by 12 centimeters on center.

Q: 5. Is this the new updated version that can clamp without taking off the top of the cart?

A: Yes the Inovativ 5/8" Baby Pin System BH #INO500500 • MFR #500-500 has the clamp in the style that works over the tube for installation. You DO NOT have to take off the top shelf in order to use it.

Q: 6. Do they make a baby pin like this with the smaller end on both sides? I need something like this to attach my Forza 500 COB light to my Impact heavy duty light stand, the included spigot is way too small. What is the best way to attach my COB light to my Impact Heavy duty stand? Thank you

A: Yes, please review the Impact SRP-113 Long Double Stud 5/8". Impact SRP-113 Long Double Stud 5/8" BH #IMSRP113 • MFR #SRP-113 https://bhpho.to/3ii0Tpy

Q: 7. Can someone please verify if the max opening is exactly 4" at it's widest or a little smaller? I am looking to attach to a 4" wide i-beam. It won't work for me if it's a bit smaller.

A: We sell a six inch Matthews C - Clamp with 2- 5/8" Baby Pins - 6" B&H # MACC658 this is your safest option

Q: 8. What is the pin length? 3inch?

A: The length is 3.5".

Q: 9. I tried to use this on a c-stand with my elinchrom D-Lite 400W/s RX 4 Flash Head but the head does not fit on it properly. I bought the elinchrom in a bundle that included light stands. The elinchrom fits on the light stand perfectly. Now, I want to put the flash head on my c-stand. What are the proper attachments to do this to connect it to a c-stand?I bought the following products:a href= http://www.bhphotovideo.com/c/product/1086351-REG/elinchrom_el_20842_2_d_lite_rx_4_2_light.html target= _blank http://www.bhphotovideo.com/c/product/1086351-REG/elinchrom_el_20842_2_d_lite_rx_4_2_light.html/aa href= http://www.bhphotovideo.com/c/product/372016-REG/Impact_CT40MKIT_Master_Century_C_Stand.html target= _blank http://www.bhphotovideo.com/c/product/372016-REG/Impact_CT40MKIT_Master_Century_C_Stand.html/aThanks.

A: Your Elinchrom Head should fit on the 6-inch pin on the smaller, grooved, off-set end of the pin. But, first slide the small end of the pin through the appropriate-sized hole in the grip-head (on the arm extension) after turning the handle on the grip head to loosen the grip head and open the holes wide enough to slip the pin through. Then tighten the grip head handle to hold the pin in place, and to the angle you choose. Once that is done, you can then attach the Elinchrom head to the grooved end of the pin and re-adjust the angle and height.

Q: 10. Would this be the most streamlined way to mount a monitor to the cart?

A: Yes, Inovativ 5/8" Baby Pin System BH #INO500500 is the most streamlined way to mount a monitor to the cart.