The Color Correction Gel Kit for Godox AD600 and Flashpoint Xplor 600 Strobes from Flashgels is designed to make it easy for photographers to balance their flash with the ambient light source to save time in post-production adjustments. Filters in the kit include 1/4, 1/2, and Full CTO to subtract a blue cast from the image or to use the warm color temperature creatively. The 1/2 CTB and Full CTB filters compensate for an excess of amber light, while the 1/2 and Full Green filters balance the flash with most fluorescent lighting. Also included are a 1/2 CTS filter and two High Temp Mounting Bands to attach the filters to the fixture.

2 x High Temp Mounting Bands    1/4 CTO, 1/2 CTO, Full CTO Filters    1/2 CTB, Full CTB, 1/2 CTS Filters    1/2 Green and Full Green Filters

Related Questions and Answers

Q: 1. Do you use these barebulb or reflector (what type of reflector)?

A: According to the manufacturer, the Flashgels Color Correction Gel Kit for Godox AD600Pro and Flashpoint Xplor 600Pro Strobes are designed to wrap over top of the bulb of your Godox AD600Pro / Flashpoint Xplor 600Pro Strobe and are held on by a high temp band. These gels allow you to retain full and normal use of all of your modifiers. Its a simple effective setup that is quick to put on and take off, and stores perfectly flat when not in use for easy storage in your bag.

Q: 2. Would these fit the AD1200 Pro?

A: No

Q: 3. Are the gels susceptible to heat and will they melt on to the bulb?

A: Yes, advised by manufacture the high temp gel and band are rated for much higher temps than they will ever be exposed to so there’s no worry about melting gels. and we have performed in house test in the super store and the hold up very well.

Q: 4. How close is the orange to a full cto?

A: its reasonably close to a full cto

Q: 5. Will these fit on the Godox AD600BM bulb?

A: These gels are for the AD600Pro. They are not designed for the AD600BM.

Q: 6. it is can burn ? how long time does colour gel hold heat ?

A: The high temp gel and band are rated for much higher temps than they will ever be exposed to so there’s no worry about melting indicated by manufacture.

Q: 7. Will these fit the godox sk400ii flashes?

A: These will not work on a SK 400 II flash.

Q: 8. I have a different brand of domed strobes, what is the diameter of the circular top?

A: I contacted Flashgels concerning your inquiry about the diameter of the circular top of the Flashgels Creative Color Kit. Unfortunately, I have not yet received a response in regards to your inquiry. The Creative Color Gel Kit was designed specifically for use with the Godox AD600Pro, so it may be that they do not have this information available. However, if you wish, you may contact the manufacturer directly for assistance with your inquiry by e-mailing them at saycheese@flashgels.com​.

Q: 9. Can this be used with the Godox AD300Pro? will the diameter of this gel cover the AD300Pro head ?

A: This is recommended for the AD300 B&H # GOADR14

Q: 10. Would these Godox AD600 Flashgels fit over the glass dome on the Orlit RT-series strobes?

A: These gels are custom cut for the Godox AD600 flash tube and its private label variants(Flashpoint). It is not designed for use with other brand flash tubes.