Fotodiox Wonderpana Freearc Core Unit Kit For Canon 14mm Lens With 6.6 X 8.5" Hard-edge Graduated Neutral Density 0.9 And 145mm Circular Polarizer Filters
- Product Code: ga66864
-
The FotodioX WonderPana 6.6" Holder Bracket is a two-piece assembly designed to be used in combination with a FotodioX WonderPana FreeArc Core Unit, a WonderPana 145 Core Unit, or a WonderPana FreeArc Aluminum Step-Up Ring. A WonderPana Core Unit or a WonderPana FreeArc Aluminum Step-Up Ring with the WonderPana 6.6" Holder Bracket attached can then allow for the convenient use of two 2.5 to 4.0mm-thick filters measuring 6.6" wide, or one 2.5 to 4.0mm-thick filter measuring 6.6" wide along with one FotodioX 145mm round filter behind it.
Use of this holder bracket is easily accomplished by separately attaching its two assembly pieces to opposite sides of a WonderPana Core Unit or a WonderPana FreeArc Aluminum Step-Up Ring using the six included brass short-screws. Pre-tapped threaded inserts along the edge of a WonderPana Core Unit or FreeArc Aluminum Step-Up Ring accommodate those screws and ensure correct positioning of the two assembly pieces so that they are positioned parallel to each other and can hold a 6.6"-wide filter between them. The combined WonderPana Core Unit, or WonderPana FreeArc Aluminum Step-Up Ring, and WonderPana 6.6" Holder Bracket can then be attached to a compatible lens.
For WonderPana Core Units that consist of a rear lens collar and a front filter holder, pre-tapped threaded inserts along the edge of the front filter holder accommodate the six brass short-screws for correct positioning of the WonderPana 6.6" Holder Bracket's two assembly pieces. Once the holder bracket and a front filter holder are combined, and the separate collar has been slid over the rear of a compatible lens until it has achieved a secure fit, the front filter holder with the attached holder bracket can be screwed onto the front of the installed rear lens collar.
After being fitted onto a compatible lens, the bearing design of the WonderPana FreeArc Core Units and WonderPana FreeArc Aluminum Step-Up Rings allows a WonderPana 6.6" Holder Bracket to be rotated 360°. This permits the use of graduated neutral density and other filters that are enhanced by varied positioning. While a WonderPana 145 Core Unit does not include a 360° rotating mechanism, eight pre-tapped threaded inserts all around its edge allows the WonderPana 6.6" Holder Bracket to be installed in 45° increments so that rectangular filters placed within it can be angled to the best approximate position relative to the subject in front of the camera.
The FotodioX WonderPana 6.6" Holder Bracket provides two pairs of filter slots, a configuration that accommodates two compatible rectangular filters. For each rectangular filter that is placed within one of the holder bracket's slots, its position can be secured using the included brass long-screws. Pre-tapped threaded inserts along the outside of the holder bracket allow the long-screws to each apply pressure to a spring-loaded retainer within each filter slot. When a pair of the long-screws are used, the level of grip upon a rectangular filter can be varied, which can complement the use of graduated filters whose effect can be adjusted to better suit changing lighting conditions or creative demands by sliding them up or down within a filter slot.
Each FotodioX WonderPana Core Unit or WonderPana FreeArc Aluminum Step-Up Ring includes front filter threads, which allow a FotodioX 145mm round filter to be used along with this filter holder. If a 145mm round filter is used on the attached WonderPana Core Unit or WonderPana FreeArc Aluminum Step-Up Ring, the rectangular filter slot closest to the rear of the holder bracket becomes unavailable. The WonderPana 6.6" Holder Bracket features a lightweight, aluminum-alloy construction that has a corrosion-resistant, black anodized finish for durability. A rigid pouch is included for storage and transport.
For Canon EF 14mm f/2.8L II USM WonderPana FreeArc Core Unit, Lens Cap WonderPana 6.6" Holder Bracket 6.6 x 8.5" Graduated ND 0.9 Filter Hard-Edged Line of Transition Up to 8x Filter Factor, 3-Stop Reduce Exposure in Selective Areas 145mm Circular Polarizer Filter 1.25 to 8x Filter Factor, +0.3 to 3-Stop Helps to Eliminate Reflections and Glare
Parameters | |
---|---|
Filter Capacity | 2x 6.6 x 8.5", 168 x 216 mm, Wonderpana 66 (2.5 to 4 mm Thick) or 1x 6.6 x 8.5", 168 x 216 mm, Wonderpana 66 (2.5 to 4 mm Thick) and 1x Round 145 mm |
Material | Aluminum |
Dimensions | 7.3 x 0.8" / 18.5 x 2 cm |
Weight | 5.6 oz / 158.8 g |
Packaging Info | |
Package Weight | 0.665 lb |
Box Dimensions (LxWxH) | 6.7 x 4.75 x 2.4" |
- When used with a FotodioX WonderPana FreeArc Core Unit, a WonderPana 145 Core Unit, or a WonderPana FreeArc Aluminum Step-Up Ring, allows for the convenient use of two filters measuring 6.6" wide, or one filter measuring 6.6" wide along with one FotodioX 145mm round filter installed on a Core Unit or FreeArc Aluminum Step-Up Ring
- Provides two pairs of filter slots, a configuration that accommodates up to two 2.5 to 4.0mm-thick rectangular filters
- Allows up to two compatible rectangular filters to be rotated 360° when used with a FotodioX WonderPana FreeArc Core Unit or WonderPana FreeArc Aluminum Step-Up Ring
- When used with a WonderPana 145 Core Unit, allows up to two compatible rectangular filters to be installed in 45° increments so that a filter placed within it can be angled to the best approximate position relative to the subject in front of the camera
- Ability to vary grip on each installed rectangular filter to complement the use of graduated filters whose effect can be adjusted to better suit changing lighting conditions or creative demands by sliding them up or down within a filter slot
- Lightweight, aluminum-alloy construction with a corrosion-resistant, black anodized finish for durability
- Rigid pouch included for storage and transport
Related Questions and Answers
Q: 1. Can you take the polarizer off without unscrewing the holding brackets!?
A: You must remove the brackets in order to mount or remove the Polarizer filter.
Q: 2. what range of stops of light does it cut?
A: The Tiffen Multi Rota Tray Variable Neutral Density Kit with Extra 4x5.65" Circular Polarizer offers 2-6 stops.
Q: 3. I'm interested in this for my R5C. But I'd like a longer cord from the Core SWX into the camera's battery door. What is the barrel size/voltage etc and do you sell an extension for it?
A: The Core SWX Powerbase Edge Cable Extension (18") BH #COPBECEXT will make a proper extension cable.
Q: 4. Can I use this with a circular filter (polarizer) already attached to the lens?
A: If your polarizer has front filter threads and you get the proper Lee adapter ring, then yes it will work. Keep in mind you may get vignetting (darkening of the edges) if it is a wide angle lens.
Q: 5. Can this VND setup be used next to another Rota Tray with just a CP, so I can have both VND and CP? Will this work?
A: The Tiffen Multi Rota Tray Variable Neutral Density Kit with Extra 4x5.65" Circular Polarizer has a rotating ROUND CP that is permanently in the tray, and could be used alone for CP. When combined with one of the included Tiffen 4 x 5.65" Circular Polarizer Filters, which would take up another space in your Matte Box, it becomes a variable ND solution. Tiffen also includes a spare 4x5.65" Circular Polarizer as a backup.
Q: 6. I want to use this with Nikon 24mm f/1.4 lens---is the 77mm wide angle adapter ring or 77mm Lee FK adapter ring which one that i need?Can you able to send me the link to purchase for this ring? Tks.
A: I would suggest using the Lee 77mm Adapter Ring for Wide Angle lenses with the Nikon 24-mm f/1.4. Here is a link for that adapter ring:http://bhpho.to/1jrr44R
Q: 7. Does this Tray with both the filters take up only a single slot in the matte box?
A: No, The Tiffen Multi Rota Tray Variable Neutral Density Kit comes with one rotating Circular Polarizer Tray. When combined with one of the included 4x5.65" Circular Polarizer it becomes a Variable ND solution. However, the 4x5.65" Circular Polarizer would take up another space/slot in your Matte Box. A second 4x5.65" Circular Polarizer is included as a backup.
Q: 8. Is there an adapter ring for lenses that use 77mm filters?
A: can this be fit on a Rokinon 14mm 2.8 lens?
Q: 9. How many stops does this go up to?
A: The Tiffen Multi Rota Tray Variable Neutral Density Kit goes from 2 to 8 stops.
Q: 10. can I use Cokin z-pro holder with lee filters? Cokin holder is much cheaper, what is the quality difference?
A: I have never tried. Lee is very heavy duty.
Top Bestselling Products
Lee Filters Sw150 Super Stopper Nd Filter (150 X 150mm, 15-stop)
$580.50 $766.26
Tiffen 4 X 6" 3 Cranberry Hard-edge Graduated Filter (horizontal Orientation)
$1,199.85 $1,583.80
Wagan Jumpboost V10 Air
$382.50 $604.35
Fotodiox Wonderpana Freearc Core Unit For Tokina 10-17mm Lens
$374.85 $528.54
Lee Filters Filter Pouch For 4 X 6" Graduated Filter
$27.00 $35.91
Atlona 2-year Extended Warranty For At-ome-ms52w-eu
$779.94 $967.13
Tiffen 4 X 6" 3 Tobacco Hard-edge Graduated Filter (horizontal Orientation)
$1,199.85 $1,811.77
Tiffen 127mm 80a Color Conversion Filter
$1,669.50 $2,621.11
Tiffen 4 X 6" 3 Grape Hard-edge Graduated Filter (horizontal Orientation)
$1,199.85 $1,883.76
Relab Development Lx480 Complete Plug-in (download)
$1,047.00 $1,350.63
Eclipse Tools Quikthru Rj45 Cat6 Unshielded Connector (500-pack)
$671.85 $1,007.77
Products You May Like
Leica Cap For Lens Hood #12589
$195.00 $265.20
Ttartisan 50mm F/1.2 Lens For Nikon Z (black)
$294.00 $435.12
Chrosziel 100-90mm Insert Ring
$210.00 $281.40
Viewsonic Vp3481a 34" 21:9 Curved Freesync 100 Hz Usb Type-c Docking Lcd Monitor
$1,799.97 $2,591.96
Yorkville Sound Nx10c-2 Two-way 10/1" Coaxial 1200w Powered Pa Speaker
$2,247.00 $2,988.51
Eliminator Lighting Frost Fx Bar Rgbw Led Linear Fixture
$899.97 $1,295.96
Vocopro Kj-6000 Rack-mountable Karaoke/dj Mixer With Key Control
$837.00 $1,171.80
Fujifilm Instax Mini Link 3 Smartphone Printer (sage Green)
$299.85 $428.79
Sirui Adjustable Sling Handgrip With Nato Clamp For Dji Gimbals
$107.70 $172.32
Svs Ultra Evolution Pinnacle 3-way Floor-standing Speaker (black Ash, Single)
$7,499.97 $10,424.96
Rix Pocket K2 Thermal Imaging Monocular (50 Hz)
$1,497.00 $1,946.10