You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Hprc Urs2730w-03 Wheeled Hard Case For Ursa Mini Pro/broadcast Camera

Hprc Urs2730w-03 Wheeled Hard Case For Ursa Mini Pro/broadcast Camera
  • Product Code: ga66905
  • Availability: In Stock

$1,371.00 $1,809.72

Protect and transport your Blackmagic Design URSA Mini Pro or URSA Broadcast Camera in the URS2730W-03 Wheeled Hard Case from HPRC. This waterproof case features a custom-cut, high-density foam insert that cradles the camera and its accessories. Recessed wheels and an extendable handle enable you to roll the case along while traveling.

Each foam niche is precision-cut to fit the camera or one of its accessories. Spaces are provided for the camera body, a tripod plate, one lens, two batteries, a rod system, a memory card case, a power supply, and a battery charger.


This IP67-rated waterproof case is equipped with a neoprene O-ring and an automatic valve that balances interior air pressure while keeping water out. Its robust two-stage latches open smoothly and are designed to stay closed in case of a fall. The URS2730W-03 Case also features reinforced corners and folding top and sides handle with steel pins.

For Blackmagic URSA Mini Pro/Broadcast    Waterproof, Unbreakable Resin Case    Wheeled Case with Extendable Handle    Custom Pre-Cut, High-Density Foam    IP67 Rating, PA66 Neoprene O-Ring Seal    Automatic Valve Equalizes Pressure    Secure 2-Stage Latches    Folding Handles, 2 Padlock Hasps    Shock-Resistant Corners

Key Specs
ColorBlack
Carry/Transport OptionsHandle, Retractable Handle, Wheels (Built-In)
Type of ClosureLatch
Interior TypeInsert with Custom Compartments
Water ResistanceWaterproof
IP67
DimensionsExterior
24.41 x 20.47 x 13.78" / 620 x 520 x 350 mm
Interior
1.77" / 45 mm (Lid Depth)
20.04 x 18.11 x 12.44" / 509 x 460 x 316 mm
Weight22.99 lb / 10.43 kg
Parameters
Camera CompatibilityBlackmagic URSA Broadcast G2
Blackmagic URSA Mini Pro
Carry/Transport OptionsHandle, Retractable Handle, Wheels (Built-In)
Type of ClosureLatch
Interior TypeInsert with Custom Compartments
Features
ATA CompliantYes
Pressure/Purge ValveYes
Security LockAccepts Padlock (Not Included)
General
Water ResistanceWaterproof
IP67
MaterialsExterior: Resin, Rubber, Steel
DimensionsExterior
24.41 x 20.47 x 13.78" / 620 x 520 x 350 mm
Interior
1.77" / 45 mm (Lid Depth)
20.04 x 18.11 x 12.44" / 509 x 460 x 316 mm
Weight22.99 lb / 10.43 kg
Packaging Info
Package Weight24.1 lb
Box Dimensions (LxWxH)24 x 21 x 14"

  • Blackmagic URSA Mini Pro or URSA Broadcast camera
  • Two batteries
  • Tripod plate
  • Memory card case
  • Battery charger and power supply
  • One lens
  • Rod system

Related Questions and Answers

Q: 1. Could this be used as a carry on case for a flight?

A: Yes, you can use it as a carry on. I brought it on a flight to the Philippines just fine. Some airlines will have a weight restrictions, but they let me carry it on because they didn't want to be held liable for any damages. I was able to fit a 5d mkiii, 16-35, 24-70, 100L macro, 70-200 and a couple 600 RT flashes and room to spare for 3 batteries and a trigger. Very heavy lol.

Q: 2. is there a possibility to see how this case looks with dividers please?

A: Unfortunately we do not have this in stock to take photos of. Best bet would be to reach out to HPRC customer service for more info at (201) 989-3353 or by email at info@hprcusa.com.

Q: 3. Is this ursa mini pro compatible?

A: Yes

Q: 4. Description says "molded hasp for padlock"; but are those four hasps I see, for up to four padlocks &/or padlock chains, etc?

A: Yes, the HPRC Wheeled Hard Case (Black with Blue Handle) has four hasps to attach up to four locks and or chains.

Q: 5. does the case come with the inside lining?

A: This case includes custom cut foam for the Sony FX6

Q: 6. Will the internal cases fit two, Sachtler Flowtech 75 tripods with a heads attached?

A: Not that we are aware of. This would not be a good choice for holding a pair of larger tripods like that.

Q: 7. What's Second Skin?

A: The Second Skin is a semi-rigid removable insert made from a thermoforming material, allowing you to increase the maximum internal volume of the case while maintaining optimal protection. It increases the internal usable volume by 20% and weighs 70% less than the soft dock. The adjustable dividers let you create different configurations according to your needs.

Q: 8. Can this case fit 3 manfrotto tripods 35 inches x 4inches wide? It doesnt seem very deep in width, what are the exact measurements?

A: I fit my 3 stackable manfrotto 12' stands in there with a make shift liner I created from a soft bag, as well as 3 umbrellas and a tripod... there is a decent amount of room.

Q: 9. Is this case acceptable for travelling internationally? Airline got 50lbs baggage check-in limit.

A: Regarding the 50 lb limit, it depends on what you put in it - the case is not very heavy, but it is very strong. The one thing to watch out for, is the combined length limit that each airline has (length + width + height) - you should double check that.

Q: 10. The dimensions indicate this could be accepted as a carry-on for flights. Has anyone had experience doing this?

A: The HPRC 2550W Wheeled Hard Case for Sony FX6 Camera does have dimensions close to carry on luggage sizes and is ATA 300 approved for airline travel. It is recommended to check with your airline for approved carry on luggage sizes before travel.

27/07/2024

This is a very high quality case, excellent for transporting heavy or delicate equipment. I have been considering buying a Pelican case but the sizes they offered we're perfect for my need. I bought the HPRC with some reluctance but upon receipt I realized that it is of equal or greater quality to that of Pelican.

5
16/07/2024

Great case! I will be getting more once I get my other FX6's in!

5
13/06/2024

The multiple handles and modes of carry make this convenient. I feel safe traveling with my gear in this.

5
02/06/2024

I’ve taken this case on a couple of shoots now and it’s great so far. The build quality is comparable to high end big-name cases, and the foam is dense and high quality. While the yellow overlay/label isn’t a necessity, it does make for a nice touch. Also, the foam inside is very dense and can easily be cut if needed (I have different sized batteries so I cut a couple of the battery inserts to size, which was very easy due to the density of the foam). My only “caution” is to make sure you don’t drop a battery or lens into a slot before making sure it’s not too deep. It’s quite difficult to reach into the space to pull it out due to the yellow insert. An extremely minor concern, but it could save you the trouble of emptying it all out so you can flip it over to get the battery/lens out. My only additional wish is that it had room for accessories like a monitor. I always attach a Ninja to it and I have to store that separately.

5
21/05/2024

Awesome durable case. I am using it to build a portable photobooth. Case is built strong and air tight.

5
06/04/2024

Looks very nice, good attention to detail, fits my gear. I like that this case lets me store the camera without having to detach the top handle, which you sometimes need a hex key for. The other cases I've seen make you detach the top handle to store. This saves time and works better.

5
30/11/-0001

Great case-for the camera!

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Blackmagic Design Ursa Broadcast Eng Kit

$735.00 $1,051.05

Blackmagic Design Ursa Cine Top Handle

$597.00 $728.34

Products You May Like

Leitz Cine Prime 40mm Lens (feet, Pl Mount)

$127,500.00 $193,800.00

Countryman Isomax 2 All Purpose Microphone

$846.84 $1,253.32