This Proaim Rotating Turnstile Mount features a Mitchell mounting base for use on the Proaim dolly or other compatible dollies. It attaches to the dolly and provides an Elemac/Euro mounting system for cine accessories such as a bazooka or offset arm. In addition, the turnstile mount also provides two accessory seat studs that rotate around the mount. This allows you to add accessories such as riser seats or light stands that move along with your dolly. You can lock the rotation to set the position of the studs using the integrated locking lever.

Euro/Elemac Mounting Adapter    Provides Swiveling Seat Posts    Rotation Can Be Locked    Allows Mounting of Optional Seats    Allows Mounting of Optional Accessories

The turnstile mount fits onto your Mitchell mounting plat and locks into the keyway so it won't rotate

It has four through-holes and requires four bolts to safely secure it to the mounting surface

Related Questions and Answers

Q: 1. Does this work with the Proaim Heavy-Duty Portable Tripod Dolly?

A: The dolly only works with tripods with dual-spiked feet.

Q: 2. If placed over a hard surface or even screwed to a heavy table using the feet not the mitchel, can you use a heavy Cabrio pl zoom lens at 100 or even 120mm focal length and not get shaking video using a super 35 camera with no IS? Did anyone tested this at Proaim or anyone else? All YouTube reviews have no real samples of this, only short unimpressive shots mostly wide Angie shots

A: The Proaim Flyking Precision Camera Slider has a 154 pound payload and will handle the Fujinon Cabrio Lens with a Super35 Camera.

Q: 3. Is there a 75mm bowl version available?

A: Proaim does not make a 75mm bowl version of the Proaim 4' Flyking Precision Camera Slider with 100mm Bowl Mount & Carrying Case. There is not an adapter specifically for the FlyKing, but you could use the E-Image 100mm to 75mm Bowl Adapter, BH #EIA17, to adapt to the 100mm bowl.

Q: 4. Will this attach on a Dana Dolly? I want to do underslung specifically.

A: The Proaim Mitchell-Base Tilt Wedge (B&H# PRPMTCLWP) features a base with many holes in it that could be used with appropriate hardware (screws and washers) to attach it to a Dana Dolly Portable Dolly System with Universal Track Ends, 100 & 150mm Bowl Adapters (B&H# DADD150UK). However, unless you are thinking to drill holes in the dolly, please keep in mind that the screw holes may not line up. As such, you may need to mount the base of the tilt wedge at an angle so that you can use at least two screws or bolts to connect them.

Q: 5. Is it possible to just buy the storage bag?

A: While we do not sell the Tripod Case from Proaim, we do have a Ruggard Deluxe Padded 35" Tripod Case (Black), BH #RUBD3035. https://bhpho.to/3q6Gx1o

Q: 6. How much does the slider itself weight? I assume the 40lbs listed is including the case.

A: The slider itself within the Proaim 2' Flyking Precision Camera Slider with 100mm Bowl Mount & Carrying Case weighs 20.94 lb (9.5kg).

Q: 7. What plastic case works with this tripod?

A: The Nalpak TP-1440WH 14" Tuffpak Series Hard Tripod Case with Wheels (BH #NATP1440WH) would work well as a hard tripod case for transferring the Proaim Heavy-Duty Mitchell Base Tripod Legs with Mid-Level & Ground Spreaders (Silver).

Q: 8. I understand this to accept a mitchell head on one end. Can the other end accept a 100mm half bowl mount? My sticks have provision for 100mm bowl, and I'd like to use this with my current setup.

A: There are no available100mm bowl to Mitchell adapters. The Proaim Mitchell-Base Tilt Wedge requires a Mitchell mount to meet its weight rating.

Q: 9. Will a bowl adapter allow the use my 100mm bowl fluid head?

A: Yes however you will need an adapter Proaim Mitchell Base to 100mm Bowl Adapter BH #PRBP30200 • MFR #BP-302-00

Q: 10. With one leg section, what is the footprint measurement?

A: Here are the measurements of P-MTCL-STD: Folded: 100cm Maximum: 175cm