The FotodioX WonderPana 6.6" Holder Bracket is a two-piece assembly designed to be used in combination with a FotodioX WonderPana FreeArc Core Unit, a WonderPana 145 Core Unit, or a WonderPana FreeArc Aluminum Step-Up Ring. A WonderPana Core Unit or a WonderPana FreeArc Aluminum Step-Up Ring with the WonderPana 6.6" Holder Bracket attached can then allow for the convenient use of two 2.5 to 4.0mm-thick filters measuring 6.6" wide, or one 2.5 to 4.0mm-thick filter measuring 6.6" wide along with one FotodioX 145mm round filter behind it.

Use of this holder bracket is easily accomplished by separately attaching its two assembly pieces to opposite sides of a WonderPana Core Unit or a WonderPana FreeArc Aluminum Step-Up Ring using the six included brass short-screws. Pre-tapped threaded inserts along the edge of a WonderPana Core Unit or FreeArc Aluminum Step-Up Ring accommodate those screws and ensure correct positioning of the two assembly pieces so that they are positioned parallel to each other and can hold a 6.6"-wide filter between them. The combined WonderPana Core Unit, or WonderPana FreeArc Aluminum Step-Up Ring, and WonderPana 6.6" Holder Bracket can then be attached to a compatible lens.

For WonderPana Core Units that consist of a rear lens collar and a front filter holder, pre-tapped threaded inserts along the edge of the front filter holder accommodate the six brass short-screws for correct positioning of the WonderPana 6.6" Holder Bracket's two assembly pieces. Once the holder bracket and a front filter holder are combined, and the separate collar has been slid over the rear of a compatible lens until it has achieved a secure fit, the front filter holder with the attached holder bracket can be screwed onto the front of the installed rear lens collar.

After being fitted onto a compatible lens, the bearing design of the WonderPana FreeArc Core Units and WonderPana FreeArc Aluminum Step-Up Rings allows a WonderPana 6.6" Holder Bracket to be rotated 360°. This permits the use of graduated neutral density and other filters that are enhanced by varied positioning. While a WonderPana 145 Core Unit does not include a 360° rotating mechanism, eight pre-tapped threaded inserts all around its edge allows the WonderPana 6.6" Holder Bracket to be installed in 45° increments so that rectangular filters placed within it can be angled to the best approximate position relative to the subject in front of the camera.

The FotodioX WonderPana 6.6" Holder Bracket provides two pairs of filter slots, a configuration that accommodates two compatible rectangular filters. For each rectangular filter that is placed within one of the holder bracket's slots, its position can be secured using the included brass long-screws. Pre-tapped threaded inserts along the outside of the holder bracket allow the long-screws to each apply pressure to a spring-loaded retainer within each filter slot. When a pair of the long-screws are used, the level of grip upon a rectangular filter can be varied, which can complement the use of graduated filters whose effect can be adjusted to better suit changing lighting conditions or creative demands by sliding them up or down within a filter slot.

Each FotodioX WonderPana Core Unit or WonderPana FreeArc Aluminum Step-Up Ring includes front filter threads, which allow a FotodioX 145mm round filter to be used along with this filter holder. If a 145mm round filter is used on the attached WonderPana Core Unit or WonderPana FreeArc Aluminum Step-Up Ring, the rectangular filter slot closest to the rear of the holder bracket becomes unavailable. The WonderPana 6.6" Holder Bracket features a lightweight, aluminum-alloy construction that has a corrosion-resistant, black anodized finish for durability. A rigid pouch is included for storage and transport.

For Tokina AF 10-17mm f/3.5-4.5 Fisheye    WonderPana FreeArc Core Unit, Lens Cap    WonderPana 6.6" Holder Bracket    6.6 x 8.5" Graduated ND 0.9 Filter    Soft-Edged Line of Transition    Up to 8x Filter Factor, 3-Stop    Reduce Exposure in Selective Areas    145mm Circular Polarizer Filter    1.25 to 8x Filter Factor, +0.3 to 3-Stop    Helps to Eliminate Reflections and Glare

• When used with a FotodioX WonderPana FreeArc Core Unit, a WonderPana 145 Core Unit, or a WonderPana FreeArc Aluminum Step-Up Ring, allows for the convenient use of two filters measuring 6.6" wide, or one filter measuring 6.6" wide along with one FotodioX 145mm round filter installed on a Core Unit or FreeArc Aluminum Step-Up Ring
• Provides two pairs of filter slots, a configuration that accommodates up to two 2.5 to 4.0mm-thick rectangular filters
• Allows up to two compatible rectangular filters to be rotated 360° when used with a FotodioX WonderPana FreeArc Core Unit or WonderPana FreeArc Aluminum Step-Up Ring
• When used with a WonderPana 145 Core Unit, allows up to two compatible rectangular filters to be installed in 45° increments so that a filter placed within it can be angled to the best approximate position relative to the subject in front of the camera
• Ability to vary grip on each installed rectangular filter to complement the use of graduated filters whose effect can be adjusted to better suit changing lighting conditions or creative demands by sliding them up or down within a filter slot
• Lightweight, aluminum-alloy construction with a corrosion-resistant, black anodized finish for durability
• Rigid pouch included for storage and transport

Related Questions and Answers

Q: 1. Does this Tray with both the filters take up only a single slot in the matte box?

A: No, The Tiffen Multi Rota Tray Variable Neutral Density Kit comes with one rotating Circular Polarizer Tray. When combined with one of the included 4x5.65" Circular Polarizer it becomes a Variable ND solution. However, the 4x5.65" Circular Polarizer would take up another space/slot in your Matte Box. A second 4x5.65" Circular Polarizer is included as a backup.

Q: 2. Will this lens work with the D800? Looking to do family beach photos

A: Although this lens will physically fit, it is a DX lens that was designed for cropped sensor cameras. If used on the D800 there would be vignetting. The D800 is a full frame sensor camera and FX lenses should be used.

Q: 3. Is the lens hood removable?

A: No the lens hood is not removable

Q: 4. Has anyone actually tried this with an FX camera, like a D750? What I've read says that you get normal fisheye effect--without vignetting or circular image--at the 17 mm range. Or does this lens make the camera switch automatically to DX crop factor?

A: As far as I know, the D750 format needs to be changed manually from FX to DX.

Q: 5. Will this lens auto focus on a Nikon D300?

A: Yes, it will autofocus on the D300. The D300 does not have any focus restrictions or special requirements. It will autofocus with any autofocus lenses made by Nikon or for the Nikon AF system by other manufacturers.

Q: 6. This len is compatible with nikon D7200?

A: Yes! I use it on my D7200. I love it!

Q: 7. Will this fit a Sony FE4/24-105 G OSS lens with 77mm diameter? Or do you recommend 67-82 VND filter?

A: For the Sony FE 24-105mm f/4 G OSS Lens you can go with either the 58-77mm or the 67-82mm size. The H&Y Filters RevoRing Variable ND3-ND1000 & Circular Polarizer Filter (67-82mm) would definitely work for that lens. I would choose the size based on what other lenses one may want to use this on.

Q: 8. Can this VND setup be used next to another Rota Tray with just a CP, so I can have both VND and CP? Will this work?

A: The Tiffen Multi Rota Tray Variable Neutral Density Kit with Extra 4x5.65" Circular Polarizer has a rotating ROUND CP that is permanently in the tray, and could be used alone for CP. When combined with one of the included Tiffen 4 x 5.65" Circular Polarizer Filters, which would take up another space in your Matte Box, it becomes a variable ND solution. Tiffen also includes a spare 4x5.65" Circular Polarizer as a backup.

Q: 9. is this lens compaitble with my black magic 6k? If so, how much crop can I expect?

A: This is an EF-mount APS-C/Super35mm format lens. Used on your BMPCC6k and depending on the resolution you use, you would have a minimum of 1.558x crop factor (using 6K full sensor readout), meaning this would be a 15.58mm-26.49mm equivalent lens.

Q: 10. Is there an adapter ring for lenses that use 77mm filters?

A: can this be fit on a Rokinon 14mm 2.8 lens?