Conveniently charge any Watson Pro battery that has a D-Tap port with this Single-Position Li-Ion Battery Charger with a D-Tap Output from Watson Pro. Plug it into a 3-prong AC outlet and connect the D-Tap output to your battery. An LED indicator remains red while your battery is charging and switches to green when fully charged.

This is a 100-240V worldwide compatible charger, capable of being used internationally if you incorporate appropriate plug adapters, sold separately.

1 x 98Wh Li-Ion V-Mount Battery    Portable D-Tap Single Charger    USB & D-Tap Ports on Battery    Supports up to 12A Continuous Draw    Slim Design with Ergonomic Grip

4.0Ah = 3.6 hours

4.4Ah = 4 hours

6.2Ah = 5.2 hours

6.6Ah = 5.5 hours

8.2Ah = 6.6 hours

8.8Ah = 7 hours

10.2Ah = 8 hours

11.0Ah = 9 hours

13.2Ah = 11 hours

Related Questions and Answers

Q: 1. Looking into these batteries for the new BMPCC 4K. About how long can one battery last in continuous use?

A: The BMPCC 4K draws over 1 amp of power while in use, depending what mode shooting in, the Indipro Micro 98wh is a 6.8amp battery, so it should when powering BMP 4k last easily over 5 hours,

Q: 2. What does one need to use this battery to power a Sony A7RII. How do you attach it to the camera? What cable needed for power? Any other useful suggestions? Thanks...

A: Please see link belowa href= https://www.bhphotovideo.com/c/product/1188615-REG/indipro_tools_pdva7_v_mount_plate_for_sony.html target= _blank https://www.bhphotovideo.com/c/product/1188615-REG/indipro_tools_pdva7_v_mount_plate_for_sony.html/a B&H # INPDVA7

Q: 3. can this battery attach with the normal v lock plate?

A: Attaches to a standard V Lock mount.

Q: 4. Does this battery is suitable for the Sound Devices MixPre 10t?

A: Yes, you can use these batteries with the MixPre10T however, you will need to purchase a D-tap to Hirose cable. For example the CAMVATE D-Tap to 4-Pin Hirose Cable (Right Angle). https://www.bhphotovideo.com/c/product/1578669-REG/camvate_c2537_d_tap_to_right_angle.html

Q: 5. Are these battery packs safe for air travel? The calculation of amp hrs. and voltage puts them over 100wh(14.8v x 6.8ah=100.64wh)? I travel a bit and internationally they always look at the amp hrs.

A: IndiPro Tools rates these batteries at 98Wh and the battery has IATA Compliant Carry-ON listed on the front. You will want to check with your airline before traveling, however this battery should be safe to travel with.

Q: 6. Is this compatible with the Canon C300 MkII via a D-Tap?

A: Yes it is compatible.

Q: 7. Will this work on the Sony Fx3?

A: Yes, you will need to use a D-tap to FZ-100 Dummy Battery to connect the IndiPRO Tools Micro-Series V-Mount Li-Ion Battery to the Sony FX3.

Q: 8. How long would this last on a Aputure 120D II at full power? I tested a Anton Bauer Cine 150 and that went 45 minutes before shutting off with 25% remaining. I'd guess maybe 90 minutes?

A: The Aputure Light Storm LS C120D II, B&H # APLSC120D2AK, has a Max Power Consumption of 180W. This battery is rated at 270Wh, meaning your guess of 90 minutes should be around where the battery lasts.

Q: 9. Will these fit on the Hawk-Woods VL-MCF2 Mini V-Lok Will these fit on the Hawk-woods Hot Swap Camera Plate for RED Hawk-Woods VL-MCF2 Mini V-Lok?

A: Yes, The IndiPRO Tools Micro-Series 98 battery will fit and work with the Hawk-Woods VL-MCF2 plate.

Q: 10. Will this work for Arri SR2 High Speed?

A: You will need to make sure that the battery's nominal 14.4 voltage steps down to 12V, 4.5A.