Transmit video and control signaling in a data center, conference room, or classroom with this 4K HDMI 2.0 over HDBaseT Tx/Rx Video Extender Kit from AVPro Edge. This transmitter and receiver pair can transmit up to DCI 4K60 video and embedded audio up to 330'. The units are slim and compact so they can fit into any media setup. Using Invisible Compression Technology (ICT), the extenders transmit up to 18 GB/s, retaining HDR metadata, up to 12-bit 4:4:4 color, and prevents color shifts and banding.

The transmitter features one HDMI 2.0 input, one HDMI 2.0 loop output, two USB Type-A and one USB Type-B input for KVM capabilities. The HDBaseT output connects a Cat 6a cable to transmit the video with embedded audio as well as serial signaling. It also features a 3-pin RS-232 terminal block, an optical TOSLINK output for extracted audio, and dual Ethernet ports. It also features 3.5mm IR input and outputs for IR pass-through.

The receiver features one HDMI 2.0 output, two USB Type-A ports, and one USB Type-B host output for KVM capabilities. The HDBaseT input connects a Cat 6a cable to receive the video from the transmitter with embedded audio as well as TOSLINK audio signals. It also features a 3-pin RS-232 serial terminal block, an optical Toslink audio return input, and dual Ethernet ports. It also features 3.5mm IR input and outputs for IR pass-through.

Embedded audio support includes transport of uncompressed two-channel PCM, LPCM 5.1 & 7.1, Dolby Digital, DTS, Dolby TrueHD, DTS HD-Master Audio, and Dolby Atmos audio. The system supports ESD protection up to 7KV, and it features a 3-20V protection circuit to safely transport IR signals.

Only one power supply is included since the units support 48V power-over-HDBaseT (PoH), allowing one unit to be powered by the other, saving valuable outlet space. Also included with the kit are Tx and Rx IR cables, four 3-pin terminal blocks for the RS-232 ports, and rack ears for mounting.

Transmitter & Receiver Pair    Extends 4K HDMI Transmission up to 330'    Supports up to DCI 4K60 HDMI 2.0 Video    HDR Support up to 12-Bit 4:4:4    Selectable USB Host, EDID Management    HDBaseT over Cat 6a with PoH Support    Ethernet Hub HDCP 2.2 Support    RS-232, CEC, 3D Daisy-Chaining Support    ESD Protection for Circuitry and IR

Ultra-slim transmitter and receiver pair sends up to DCI 4K HDMI video up to 330'

Bidirectional, selectable USB host

TOSLINK Audio Return Channel (ARC) to extract audio from HDMI and send to an A/V receiver or audio controller while also transmitting the embedded HDMI audio

10/100 Ethernet hub capability

Up to 18 Gb/s bandwidth using Invisible Compression Technology (ICT)

Supports HDCP 2.2 and earlier, CEC pass-through, and 3D video

Only one power supply is required with power over 48V HDBaseT support

IR pass-through enabled with included IR units; bidirectional RS-232 control support

Cat 7/6a cable recommended for 4K video

HDR support up to 12-bit 4:4:4

Embedded two-channel PCM, Dolby, Digital, DTS, DTS-HD TrueHD, and Atmos audio support

Daisy-chaining support for additional extension

Related Questions and Answers

Q: 1. Anamorphic desqueeze?

A: Yes, our ATOM A5 Monitor is able to desqueeze anamorphi.

Q: 2. Does this monitor have a fan or make any noise?

A: The Vaxis Atom A5 is a fan-less design. The Vaxis Atom A5 would be silent.

Q: 3. Says powered at one end. Can this be powered from the Rx side?

A: This would need either the transmitter or receiver to be plugged into a power supply and then the other would receiver power via the Ethernet cable.

Q: 4. Does it transmit audio if I'm using, for example, a BMP6K with a Rode Wireless Go attached to it?

A: Yes, as long as you are recording audio into the camera with the Rode Wireless Go while it is connected to the Blackmagic Design Pocket Cinema Camera 6K, it will also transmit audio. The audio is embedded to the HDMI cable sent into the Vaxis Atom A5 Wireless Monitor Professional Package.

Q: 5. Are those ethernet ports to transmit out?

A: Yes. This send out the signal over Cat5,Cat6 or Cat7 cables.

Q: 6. What is the Latency from one A5 to another?

A: The Vaxis A5 to A5 will have a latency of 80ms.

Q: 7. Can it transmit to 2 iPads and 2 iPhones at the same time?

A: Unfortunately no, the Vaxis Atom A5 5.5" Wireless RX/TX Monitor can not transmit to iPhones or iPads.

Q: 8. Are there supposed to be 2 power supplies? One for the transmitter, one for the receiver?

A: No. Only one power supply is included since the units support 48V power-over-HDBaseT (PoH), allowing one unit to be powered by the other.

Q: 9. Does this product have VRR support for consoles like Xbox Series or PS5 once that's an option?

A: No it does not.

Q: 10. what is the latency for smartphone and tablets?

A: A end-user aims to get 492 Feet Range at a 0.08s latency, but many factors come into play that can interfere with the unit causing it to have bigger latency issues.