The Sony URX-P40 is a camera-mount wireless receiver that delivers uncompromising audio quality while still being easy to use and fast to set up with no menu diving. It is made with simplicity in mind for DIY cameramen, videographers, vloggers, and journalists working in the field without a crew. The receiver is packed with professional features including NFC Sync and Channel Memory functions, which handle time-consuming setup and adjustments for you, so you're ready to shoot within seconds.

The URX-P40 offers digital signal processing for pristine audio and analog UHF transmission with true-diversity reception for reliability, even under difficult shooting conditions. This low-profile camera-mount receiver is designed for enhanced mobility with compact camcorders and smaller DSLR/mirrorless cameras.

Sony shooters can take advantage of the SMAD-P5 digital MI Shoe adapter (available separately), which provides a direct, clean digital audio connection to select cameras equipped with a digital Multi Interface Shoe.

The URX-P40 is backward-compatible with Sony WL-800 and UWP Series systems.

For UWP-D Wireless Systems    True-Diversity Camera-Mount Receiver    2772 Auto-Scan Frequencies with NFC    Professional Features for Fast Workflow    Daylight-Readable OLED Display    Headphone Output for Monitor Mode    6-Hr AA Batteries + USB Power    Up to 16 Mics on Set / 330' Range

To achieve stable audio, the UWP-D receiver employs true-diversity technology with two antennas and two independent receiver sections within the unit. Both RF signals are compared and the stronger signal is automatically selected for output—reducing dropouts to a minimum.

The angle of the two antennas can also be adjusted, which helps to further prevent signal dropouts.

The system offers a 72 MHz bandwidth with 2772 UHF frequencies.

NFC Automatic Channel-Setting Mode
Press and hold the NFC/Sync button, and the receiver scans for the cleanest RF channel. Simply hold the transmitter next to the receiver; it automatically syncs up and you’re good to go!

Unlike purely digital systems, the URX-P40 allows you to send a single mic to multiple cameras for broadcast applications. Fast NFC communication makes setup for multiple receivers a breeze.

High-Visibility OLED Display for Indoor/Outdoor Use
Both transmitter and receiver feature an easy-to-read OLED display. The quick response of the display lets you see the operating conditions clearly and accurately in real time, even in bright sunlight.

Channel Memory Function
The channel memory function lets you quickly switch between the groom’s lav mic and the wedding guest’s interview mic with the press of a button. It also allows for a fast change between mics in corporate presentations or quickly swapping to a back-up mic.

Unlike traditional analog wireless systems, the UWP-D supplements its proven analog UHF transmission technology with a proprietary digital audio processing. Transient sounds and consonants are reproduced with greater accuracy, resulting in clear, natural sound that’s intelligible and nuanced.

The URX-P40 features a robust, all-metal construction well suited for tough operating conditions.

Using the included shoemount adapter, the receiver easily mounts on your camera, while adding minimal weight to your rig. Cables are included to connect to cameras equipped with either a 3.5mm or an XLR audio input.

The SMAD-P5 digital MI Shoe adapter allows you to integrate the receiver with XDCAM camcorders and select Sony cameras equipped with a digital Multi Interface Shoe.

• This setup provides a direct digital connection, skipping the receiver’s D/A and camera’s A/D converters for superior audio quality and low noise.
• Audio information such as RF level meter, audio-mute status, and low-battery alert for the transmitters is displayed on the camera's viewfinder.
• This cable-free configuration allows for fast setup in the field.
• Compatible models include the a7R IV mirrorless camera, the PXW-Z280 and PXW-Z190 XDCAM camcorders, and more.

The URX-P40 can be used with a UWP Series or WL-800 Series transmitter.

Two AA batteries (alkaline or NiMH rechargeable type) power the receiver for up to 6 hours.

A battery count-up timer allows for accurate reading of battery running time to minute accuracy.

The receiver can also be powered through its USB port, allowing it to run for numerous hours on a USB power pack or indefinitely, if you have access to AC.

With the SMAD-P5 Digital MI Shoe adapter, the receiver can get power directly from Sony cameras equipped with an MI Shoe.

Cartridge-type battery case allows for quick battery replacement on set.

If your camera doesn’t have a headphone jack, Phone mode lets you monitor your sound via the receiver’s headphone output while recording.

When the receiver is used as a personal monitoring device by a director or crew on set, Monitor mode lets you adjust the headphone volume on the fly with the +/- buttons.

• The receiver provides a variable output level control of ±12 dB, useful when working with cameras without manual input level control.
• Simple menus make navigation easy. Advanced menus for in-depth control are also available.
• You can operate up to 16 mics in one location.

Related Questions and Answers

Q: 1. Is this unit compatible with the new URX-P41D wireless receiver?

A: Yes the Sony UTX-P40 is compatible with the URX-P41D receiver in the same frequency band.

Q: 2. can this receiver handle 2 transmitters at the same time?

A: Just one transmitter to each receiver please.

Q: 3. Can this receiver be as a IFB to monitor audio?

A: Yes, the Sony URX-P40 Camera-Mount Wireless Receiver does have a 3.5mm headphone jack which can be used to monitor audio, so it could be used for an IFB application.

Q: 4. Is it compatible with the old Sony UTX-B2 Transmitter? If not, Are there any modern receiver compatible with the Sony UTX-B2 Transmitter? Can these Sony devices be used with Nikon DSLR or Nikon Z cameras?

A: Yes, the URX-P40 receiver is backwards compatible for use with an older UTX-B2 transmitter as long as both components operate within the same frequency band. The receiver can be used with Nikon DSLR or Z cameras

Q: 5. Would this be compatible with URX-P2 or URX-P03 receivers with overlapping frequency ranges?

A: Yes, the UTX-P40 is backward-compatible with Sony WL-800 and UWP Series systems so it will work as long as both components are operating on the same frequency band.

Q: 6. Can a specific frequency be dialed in on this system or does it always auto scan for a clean frequency?

A: Yes, it is possible to select a specific transmitting frequency manually for the Sony UTX-P40 Wireless Plug-On Transmitter and wireless receiver instead of using the auto-scan feature for pairing the transmitter and receiver.

Q: 7. Is the SMAD-P5 MI Shoe Adapter included, or a separate purchase?

A: The Sony SMAD-P5 Digital MI Shoe Adapter for UWP-D Series (B&H #SOSMADP5) is not included with the Sony URX-P40 Camera-Mount Wireless Receiver.

Q: 8. Is UTX PO3 compatible with urx po3d?

A: Yes, the Sony UTX-P40 Wireless Plug-On Transmitter is compatible for use with the Sony URX-P03D Dual-Channel Camera-Mount Wireless Receiver, however, both devices must operate within the same frequency band.

Q: 9. What is the body length including the antennas?

A: The Sony URX-P40 Camera-Mount Wireless Receiver has a specified height of 70mm or 2 7/8 inches without antennas. The antennas can add up to 5 inches of height, but their lengths vary depending on the frequency range chosen. Lower frequencies mean longer antennas.

Q: 10. Does this newer receiver work with the previous gen UTX-B03 transmitter? I need to add a 2nd receiver to my kit.

A: Yes, this URX-P40 receiver will work with the previous generation UTX-B03 transmitter as long as they both operate on the same frequency band.