Save your back with the 300N Large Cinema 3 Vest with 9" Extended Top Bar & Quick Release from Easyrig. Using a suspension line to support a camera rig weighing 11 to 17 lb, this system takes the load off your shoulder, neck, and arm muscles and distributes it across your torso. This lets you shoot for longer periods of time without worrying about arm fatigue. The system consists of a Large Cinema 3 vest, a 300N shock absorber, and a 9" extended top bar. Also included is a carrying bag for convenient storage and transport of the Easyrig system.

Body-Worn Camera Support System    Reduces Strain on Arms, Neck & Shoulders    300N Shock Absorber    11 to 17 lb Load Capacity    Large Cinema 3 Vest    Waist Adjustment: 39 to 59"    9" Extended Top Bar    Quick-Release Hook for Fast Setup    3/8"-16 & 1/4"-20 Ball Studs    Carrying Case

• 11 to 17 lb load capacity
• Large Cinema 3 double-shoulder vest
• 9" extended arm
• Quick release hook securely holds camera with minimum setup time
• Includes two 3/8"-16 and two 1/4"-20 ball studs that can be fastened to a camera, camera cage, or camera handle
• Vest and waist belt made of breathable material
• Made in Sweden

Related Questions and Answers

Q: 1. Can I attach a Flowcine Serene to the Easyrig Minimax?

A: You physically can and if you stay within the max camera weight of the minimax it will work however it's not recommended by Easyrig.

Q: 2. Can I use this with a DSLR?

A: The Easyrig Minimax has a load capacity between 4.4 to 15.4 pounds. This is perfect for a DSLR Rig which is in that range. A rig will be necessary as you will need a top handle over the DSLR to use with the Minimax. For further assistance feel free to email us directly at askbh@bhphoto.com.

Q: 3. Does this need to have holes drilled to add the flow line serene arm?

A: Yes, To add the Serene Flow line arm to the Easyrig Minimax you would have to drill holes. Please note that this would void the Easyrig warranty.

Q: 4. will tilta's top handle hold 7kg camera rig on easyrig minimax? Or just suggest other top handle which i can screw on tilta's bmpcc6k cage.

A: Yes, the Tilta top handle will support your rig on the Easyrig Minimax.

Q: 5. What are the pros/cons of the quick release vs. the standard hook version? If it matters, I plan to use this with a Canon C300 Mk III.

A: The pros of the quick release beats the standard release by a mile. On and off in a second with no struggle with the quick release. I would pay extra for it.

Q: 6. I've run into an issue where the placement screw knob (located on the overhang that adjusts where the camera hangs) is actually jamming the cable, so that I can't adjust the height of the camera. Any thoughts or fixes?

A: We are sorry to hear about any issues you are facing with this EasyRig. So that we may best assist you feel free to email us directly at askbh@bhphoto.com.

Q: 7. Will this support the URSA mini pro with the SSD reader attached?

A: This Easyrig works with cameras between 4.4 to 15.4 pounds. As long as your Ursa Mini Pro Rig does not exceed 15.4 pounds in total weight it should work with this EasyRg.

Q: 8. Would my Panasonic UX 180 be too light?

A: Yes, the Panasonic UX180 is significantly too light for the 59 to 70 lb Load Capacity of the Easyrig 1200N Standard Cinema Flex Vest with Standard Top Bar & Quick Release.

Q: 9. I think you have the load capacity wrong for this model. Everywhere else I see it as 17-22lbs. The 11-17lbs looks to be way off. Can you verify?

A: The 400 series is rated for 17-22 pounds.

Q: 10. Is there a way to upgrade the payload range slightly. I got the mini max, and just weighed my camera which came out to 16lbs?

A: We offer different support bars for this system. You could change the Support Bar to one that supports 17-24 pounds or 11-17 pounds. 17-24 Pound Support Bar -https://bhpho.to/2WZuG6W 11-17 Pound Support Bar - https://bhpho.to/2JXb2Vd