Protect the LCD screen on your Blackmagic Design Pocket Cinema Camera 4K with this Half Sun Hood from Tilta. The sun hood connects to Tilta's full or half cage for the BMPCC 4K using the included thumbscrew, and it can also coexist with Tilta's SSD holders that are compatible with the cage using the same screw alignment. The aluminum and stainless steel hood protects the LCD from unwanted glare for a clear view.

Connects to BMPCC 4K Full or Half Cages    Protects Camera's LCD Screen from Glare    Secures with a Single Thumbscrew    Aluminum and Steel Construction

BMPCC 4K full or half cage

Related Questions and Answers

Q: 1. Does this come with the 12v cable to connect to the bmpcc 4k or 6k?

A: The cable is not included. It is available for a separate purchase, BH #TITAT01DCPC. https://bhpho.to/2oAnr9i

Q: 2. What is the function of the small thin screw under the plate (next to the large tightening screw)? Can I remove it so the plate can sit snug on to the camera cage?

A: That is a locking pin to help stabilize the plate. It is recommended that you utilize that pin for the best connection.

Q: 3. can this be used in a tilta battery plate ?

A: This will mount on any plate and/or cage that has 1/4 20" threads.

Q: 4. How many amps is the 12v?

A: This plate is for the Sony NP-F970 battery. That battery is 7.2VDC, not 12VDC. That battery has 6300mAh which is 6.3 amps.

Q: 5. Will this mount work for the Sony a7iii?

A: I think you're much better off just attaching a USB power bank via USB-C power connector, and bypassing the dummy battery approach (so that you can simultaneously have a native battery installed as backup).

Q: 6. Can you please recommend a cable to match the original BMPCC, 2.5mm to 0.7mm, where both ends are angled "L Shaped"? I have one and I'm trying to repurchase but have no details. Thanks

A: You can try BH #LADC2507: https://www.bhphotovideo.com/c/product/1100260-REG/lanparte_dc_25_07_d_tap_power_supply_cable.html/reviews

Q: 7. Does this work with small rig full cage for bmpcc 6K screen ?

A: This hasn't been tested by us since we have our own rig that we design products for but I would think that it is not compatible because the sunhood is mounted onto a specifically placed screw hole that is within the cold shoe mount that is on the top of the Tiltaing rig.

Q: 8. i have np-f970 battery with 7.2v output , will this cause any problem with 7.4 output of this plate to power my Blackmajic pocket 4k ?

A: The Blackmagic Design Pocket Cinema Camera 4K battery input connection is rated from 6.2V to 10V max. It therefore can handle 7.2 or 7.4 VDC.

Q: 9. Can I use this on a half cage and still expect a Ronin SC2 Gimbal to balance well?

A: Yes, but would highly suggest running unit off handle with a small friction arm.

Q: 10. Can it be used with the BMPocket 6k Tilta cage? Thanks,

A: Yes it is compatible with the Tilta full cage for the BMPCC 6K.