The lightweight 13.2 oz DLX-M1 4-Section Monopod from Magnus extends by flipping the leg locks open and pulling it to a maximum height of 67.5". The durable, aluminum monopod can support camera gear weighing up to 6.6 lb, and cameras mount on the top via its 1/4"-20 threaded mount. With its rubber foot, the monopod won't slide on smooth surfaces, but it also has a retractable spike. Therefore, you can drive the spike into the ground to stabilize the monopod on soft or uneven terrain while holding the support by its neoprene grip and the strap around your wrist. The DLX-M1 closes to a compact 21.25", which enables you to practically take it anywhere.

Load Capacity: 6.6 lb    Maximum Height: 67.5"    Folded Length: 21.25"    Sections: 4    Weight: 13.2 oz    Aluminum Construction    1/4"-20 Threaded Mount    Flip Locks    Retractable Spike with Rubber Foot    Neoprene Grip and Wrist Strap

The durable, aluminum monopod can support camera gear weighing up to 6.6 lb.

With its rubber foot, the monopod won't slide on smooth surfaces, but it also has a retractable spike. So, you can drive the spike into the ground to stabilize the monopod on soft or uneven terrain.

Hold the monopod by its comfortable neoprene grip and with its strap around your wrist, which ensures no accidental mishandling.

Related Questions and Answers

Q: 1. Does this work good with the Sony 200-600 mm lens?

A: The load capacity of the Magnus GH-M1 Gimbal Head is 30LBs. It will be able to handle the Sony FE 200-600mm f/5.6-6.3 G OSS Lens.

Q: 2. will this mount on theDOLICA 70" Proline Tripod ?

A: Yes, 90% of tripods have a 3/8" mount, which is compatible with this and most other heads.

Q: 3. What size screw one the tripod does this tripod head screw into? 3/8 or 1/4?

A: Like most the Magnus GH-M1 Gimbal Head has a 3/8 inch female thread that attaches to the tripod base.

Q: 4. How well does this head move in cold temperatures? I am shooting in Yellowstone this winter.

A: This head functions well in cold weather environments.

Q: 5. Will this mount on top of a Manfrotto MVMXPROA4US Aluminum XPRO Video Monopod+?

A: Yes they both have 3/8 16 mount

Q: 6. Is the Magnus DLX-357 tripod head removable?

A: No, this tripod head is built-in and not removable or replaceable.

Q: 7. what is the maximum diameter of the lens that this gimbal will accommodate?

A: The maximum diameter would be about 5.5 inches and almost all lenses are less than 5.5 inches around the tripod collar even if they are larger at the front.

Q: 8. Does this turn into a monopod too?

A: This model does not have a monopod option. A better option for that at the lower price point is the Sunpak 6601TM Tri-Monopod with 3-Way, Pan-and-Tilt Head, BH # SU6601TM. https://bhpho.to/3m2twTD

Q: 9. My GM-H1 has developed a slight wobble at its base just above the mounting plate. Tightening (locking) the bottom set screw stops the wobble, but when the set screw is loosened to permit the arm to swivel, the slight wobbling starts. Can I pry off the "GH-M1" logo plate on top of the arm's base and either tighten the base somehow or add a washer to take up the slack that is causing the wobble? Any suggestions/answers are welcomed!

A: The manufacturer do not list this as a possible solution. I would suggest contacting the manufacturer directly. Magnus Tel: 212-594-2120 Website http://www.magnustripods.com Email info@gradusgroup.com

Q: 10. Will this work with a Peak Design "Standard Plate"?

A: The Magnus GH-M1 Gimbal Head is compatible with Arca-type plates, L-brackets, and rails. So the answer is yes, a Peak Design standard plate will fit since it is an Arca type plate.