The 16.4' E-Image BC16P is a carbon fiber telescoping boompole with an internal cable and an XLR base offering stable and versatile microphone positioning for boom operators in news gathering, field recording, filmmaking, and video production applications. The sturdy and lightweight pole features five telescoping sections that utilize ergonomic twist locks for efficient and secure length adjustments. With a length range of 4.3 to 16.4 feet, the BC16P makes it easy to get your mic close to your subject.

Padded foam on the boompole enhances comfort, a much-appreciated benefit on long shoots. The integrated coiled XLR cable smoothly extends and retracts in response to length adjustments made with the telescoping tubes. The internal cable exits the boompole via a side-mounted, 3-pin XLR male connector at the bottom of the pole, ensuring simple hookup to your mixer or audio recorder. The 3/8"-16 male tip on the boompole allows compatibility with most microphone shockmounts and clips.

For News Gathering, Filmmaking & Video    Sturdy, Lightweight Carbon Fiber    Extends from 4.3 to 16.4'    Five Telescoping, Locking Sections    Ergonomic Twist Locks    Padded Foam Enhances Comfort    Integrated Coiled XLR Cable    Cable Smoothly Extends and Retracts    Side-Exit XLR Connector

Related Questions and Answers

Q: 1. Do you have the version with the lateral output?

A: The BC-12P does have an integrated XLR cable that exists laterally (from the side).

Q: 2. max payload for 11'5?

A: The E-Image BC12 does not have a spec for maximum weight capacity, but it has enough tensile strength to support most shotgun microphones and wind protection systems.

Q: 3. One answer says you can run a cable through the pole. The other says you can’t? Which is correct, and if you can’t what’s the point of the cable raceway?

A: I understand the confusion regarding the raceway. But I don't see any exit for the cable at the top for a cable. Nor is there a opening for an XLR connector at the base.

Q: 4. The BC12 raceway is not wide enough to fit a standard XLR cable. Design flaw or is there a solution for this?

A: Some customers have reported that the cable raceway on the E-Image 4-Section Telescoping Carbon Fiber Microphone Boompole does have a very narrow at the top of the pole. One customer mentioned having filed it to make it wider. You will need to use a cable that has a narrow profile to fit the raceway. Ambient Recording does offer slim XLR cables specifically for internal use with boompoles.

Q: 5. Is the side-exit XLR port suitable for a plug-on wireless transmitter (such as the Sennheiser EW series "SKP"), or will it not attach firmly enough?

A: In theory, yes, you could connect a plug-on transmitter to the side exit XLR output on the K-Tek KE-110CCR Avalon Series Aluminum Boompole with Internal XLR Cable. Ideally, the transmitter would have a locking mechanism for secure connection at the XLR output.

Q: 6. What is the thinnnest tube diameter, ie when fully extended what is the diameter of the outermost section?

A: The specific information on diameter for the sections of the E-Image 5-Section Telescoping Carbon Fiber Microphone Boompole is not provided by the manufacturer.

Q: 7. All my XLR cables are too thick to thread through the head of this pole. Which XLR cable is thin enough to fit?

A: You will need a 26 AWG mic cable.

Q: 8. what c-stand and clamps do I need with the K-Tek KE-89CC?

A: For the C-stand, you can use any model, just be sure to select one that accommodates the height you require. Any standard C-stand and boompole holder can be used. For a stand that extends 10 feet, you may like the Impact Turtle Base C-Stand - 10.75' - Chrome (B&H# IMLSCT40M). The same stand is available in different heights. For an easy to use boompole holder, consider the Auray Boompole Holder and Grip Head Kit (B&H# GBBPHK) or BoomMate Boompole Holder and Grip Head Kit (B&H# BOBPHK).

Q: 9. max payload for 8'?

A: The E-Image BA09 does not have a spec for maximum weight capacity, but it has enough tensile strength to support most shotgun microphones and wind protection systems.

Q: 10. What is the diameter of the pole?

A: I am sorry but E-Image does not provide that spec. Each of the four sections will be a different diameter and the mounting threads can be either 1/4-20 or 3/8"