This 20' EtherCON to EtherCON Cat 6a Shielded Ethernet Cable from Whirlwind is designed for professional audio and stage lighting applications. The EtherCON locking metal connectors help to ensure a secure fit. The cables are compatible with other Cat 6a and Cat 5e EtherCON devices and provide thick 24AWG-stranded inner conductors. Supporting the augmented Cat 6a standard, this cable is capable of supporting up to 10 Gb/s over a 328' maximum cable run.

Cat 6a RJ-45 EtherCON Connectors    1 x EtherCON RJ-45 Male    1 x EtherCON RJ-45 Male    Up to 10 Gb/s Data Transfer Rate    20' Cable Length    Shielded to Reduce Crosstalk    24AWG Gauge Cable Thickness

Related Questions and Answers

Q: 1. This accessory serves to transmit photos to a cell phone android?

A: It is designed to be used with the D5 DSLR, and the WT-6A Wireless Transmitter from Nikon in order to enhance the camera's connectivity capabilities. It is not made for just any camera and would be overkill if you just wanted to transfer to an android smartphone.

Q: 2. Since the EP-6 is discontinued, will this work with the other EN-EL18 cameras?

A: The Nikon EP-6A Power Connector is only compatible with the Nikon Z9 Mirrorless Camera. You also need the Nikon EH-6D AC Adapter. Here is the link: https://bhpho.to/3mAGBcZ.

Q: 3. connecting sound from computer through POD DI to go through sound system?

A: You need an audio mixer with XLR inputs to use this PodDI, but yes, this is used to output audio from your laptop or music player through your PA.

Q: 4. will the WT-6 work in different countries?

A: You will need to make sure that the country you're using the item in will have eligible frequencies for consumer use.

Q: 5. Hi. Does this check phase also?

A: It ONLY tells you if your cables are correctly wired or not. It will not tell what the specific problem is IF there is a problem. This is a very basic, albeit well-made, device. I use it to identify bad cables in the field.

Q: 6. Will the Nikon WT-6 be compatible with the Nikon D4s, or is proprietary to the Nikon D5?

A: This transmitter is dedicated to the Nikon D5.

Q: 7. Will turning the gain/attenuator knob down all the way mute the output? Or will there still be a noticeable signal?

A: This does not have a bypass or mute so you may hear low level audio with the gain all the way down.

Q: 8. Will the Nikon WT-6 work with Nikon D4 I have?

A: The D4/D4S requires the Nikon WT-5A. BH# NIWT5A sold new and refurbished.

Q: 9. could this work as a sideline reporter device? how do you plug in to behringer audio board ?

A: Should work and connect via the provided I/O:Mono In: 1 x 3-pin XLR femaleStereo In (L/R): 2 x 3-pin XLR female, balancedMic In: 1 x 3-pin XLR female Phone: 1 x 3.5 mm jack; 1 x 1/4 jackMic Out: 1 x 3-pin XLR male

Q: 10. Can you use an additional inline barrel pad on top of this in case you need to knock a signal down to mic level?

A: The output is already at mic level. The transformer gives you a 20 dB loss from -10 consumer line input to -30dB. If you need more, there is a built in 20 dB pad switch which takes your signal down to -50dB total. There is no reason or need to use an additional pad.