Protect your high-end network equipment and servers from unexpected power outages with the Smart-UPS SRT 3kVA Rackmount Battery Backup & Surge Protector from APC. This 2U rackmount UPS is designed to deliver 2700W / 3000 VA power output at 230V to six IEC 320 C13 and two IEC 320 C19 outlets. It can run for up to about four minutes when at full capacity, providing pure sine-wave power with a double-conversion topography for zero transfer time. This UPS automatically starts up connected equipment when the utility power returns. Its hot-swappable battery can be recharged in about three hours through the device's precise power management system. The LCD display provides an overview of critical data.

Output: 2700W / 3000 VA @ 230V    Input: 208V / 230V @ 50/60 Hz ±10 Hz    6 x IEC 320 C13 Battery Backup Outlets    2 x IEC 320 C19 Battery Backup Outlets    4-Minute Run Time at Max Load    Recharge Time: up to 2.5 Hours    Double Conversion Topology    Sine Waveform    LCD Touchscreen    2U Rackmount

The LCD display provides text and mimic diagrams that display modes of operation, system parameters, and alarms.

Designed for high-end system components, corporate servers, lab equipment, and other sensitive electronic devices, double-conversion UPS systems provide clean, consistent power regardless of the condition of the incoming power. With technology, the system operates on isolated DC power 100% of the time and has a zero transfer time, since it never has to switch to the battery.

With early-warning fault analysis on batteries, you can perform preventive maintenance in a timely manner.

Achieve high operating efficiency without sacrificing protection using these operating modes, which bypass unused electrical components in good power conditions.

Extend the runtime of your UPS with external batteries for uninterrupted power.

Protect your initial investment in the UPS when migrating from tower to rack-mount environment.

• User-replaceable batteries
• Predictive failure notification
• Audible alarms
• Disconnected battery notification
• Automatic self-test

• Remote power management over the network
• Serial connectivity
• InfraStruXure Manager compatible
• LED status indicators
• SmartSlot

• Generator compatible
• Frequency and voltage regulation
• Cold-start capable
• Resettable circuit breaker
• Safety-agency approved
• Input Power Factor Correction
• Power conditioning

• Automatic internal bypass for UPS power overload or fault
• Automatic restart of loads after UPS shutdown
• Hot-swappable batteries
• Intelligent battery management
• Scalable runtime
• Temperature-compensated battery charging

Related Questions and Answers

Q: 1. How long does the battery last when the power cuts off?

A: Typical back-up and run time for 1/2 load is 11 minutes, at full load it is 4 minutes.

Q: 2. Is there an ethernet port in the base unit ? And does this ethernet port support basic remote communication?

A: Yes, the APC Smart-UPS Battery Backup & Surge Protector with SmartConnect, B&H # APSMT3000, comes with a SmartConnect Ethernet port. SmartConnect offers cloud-based remote power monitoring, UPS firmware upgrades, remote diagnostics and proactive email notifications with recommended actions.

Q: 3. Hello, I am considering purchasing this item. I understand that it can be connected to the Internet for enhanced functionality but since I do not have a good Internet connection where I reside can I use this UPS without connecting it to the Internet? Thank You Very Much. John

A: Yes you can as connecting the APC Smart-UPS X Battery Backup & Surge Protector with SmartConnect (BH #APSMX15RM2UC) to the Internet/network is not a requirement - it is optional.

Q: 4. Will this work on 15 amp?

A: Thank you for your inquiry. This would have a NEMA 5-20P plug on it. If you change the plug to a 15 amp plug then you would derating the UPS. You wouldn't get the full capacity out of the UPS and it would be rated for around 1,500VA. I apologize for any inconvenience this causes.

Q: 5. Is this unit manageable via network connectivity (RJ45)? Specification page says serial via RJ45 but nothing about remote management via network. Thanks.

A: It is possible that the use of the word "serial" throws off users but APC refers to the port as the APC SmartConnect port which is indeed the network port on the rear of the unit.

Q: 6. Will the SmartConnect feature function after the warranty has expired?

A: Yes, it will still function. The SmartConnect feature of the APC Smart-UPS C Battery Backup & Surge Protector with SmartConnect is built into the UPS itself and is not limited by the duration of the warranty.

Q: 7. Does this come with built in ethernet or do i need to purchase an ethernet card?

A: This BH #APS3000RM2UC does have a Ethernet(RJ45) port built in.

Q: 8. What exactly does this unit provide? Power up computers? Phone?

A: Thank you for your interest in our products. This unit would provide a battery backup during a power outage. For example if you had a small power outage your equipment would stay on till the battery depletes. Usually computers are connected to it but you could connect a phone to it. You would just want to stay under 900 watts so the UPS doesn't become overloaded.

Q: 9. Follow Up question on APC Smart Card "AP9641" & SMT3000C (and also SMT2200C): Do these units *already* have less capable cards that would need to be removed to make room to make room for AP9641 ? If so: What is the best model in this form factor and VA Capacity to buy, with the goal of deploying UPS with AP9641 card?

A: Thank you for your interest in our products. You would not need to remove any card to install the AP9641. The only thing you would need to remove is the blanking panel that covers the slot where the card is installed.

Q: 10. does this unit require additional card to send email, be accessible over internet: APC Dry Contact I/O SmartSlot Card ?

A: The APC Smart-UPS Battery Backup & Surge Protector with SmartConnect, B&H # APSMT2200C, has built-in internet connectivity for management. This unit is compatible with the APC Dry Contact I/O SmartSlot Card if you want to have more advanced option for monitoring and controlling the UPS.