The black B6CONHW B6 Detachable Adapter Connector for Hardwired XLR from Countryman is designed to connect the B6 omnidirectional lavalier microphone to wireless transmitters, mixers, XLR cameras, recorders, and other gear equipped with an XLR connector. It is built with a screw-on connector and requires 48V phantom power.

Connect B6 Microphone to XLR    For Mixers, XLR Cameras, and Recorders    Requires 48V Phantom Power    Easy to Use

Related Questions and Answers

Q: 1. What is the matching mount with the rings for this Weaver 48402 base and for what size scope tube?

A: It depends on the size of the scope. For a 30mm scope I would recommend these rings: https://bhpho.to/3wH85xo or this for a 1 inch scope: https://bhpho.to/34GrEK6

Q: 2. What is the voltage output on the 4pin XLR and what is the amp or wattage rating for the 4 pin XLR?

A: The Wooden Camera V-Mount Plate with XLR Connector provides unregulated 12V power (12-16V depending on battery connected)

Q: 3. I would like to add a scope to my Marlin81-DL which is untapped only has the side mounts for the peep site. Would this work and is there any other parts I would need or would this work alone?

A: Have you checked the compatibility list on the B&H website? Krag Cooley 60 and 600 H&R 65, 165, 150, 151, 250, 251, 264, and 265 H&R 365, 450 & 550, 755, 765, 852, and 865 Marlin A1, 50, 39A (round barrel), 88, 89, 98, 80, and 81 Mossberg 25, 26, 42, 46M, 140, 142, and 146, 45-46 with 3/4" barrels Mossberg 40, 43, 44, 144, 46BT & 35m, 45, 46 with 13/16" barrels Mossberg 320, 340, 342 & 620, 640, 50, 51, 151, 152, 350, and 352 Remington 10, 11, 12, 34*, 341*, 510, 511, 512 & 521T, 12A, 121 with 3/4" barrels Remington 121 with 13/16" diameter barrels 18, 24 & 241, 33, 513S and 513T, 514 Savage 3, 4, 5, 6, 7, 19, 23, 40, 45, 219 26, 53, 56, 66, 57, 76, 4171/2, 762, 416, 417, 418, 418 1/2 Stevens-Springfield 83, 85, 87, 872 Winchester 03, 63, 42, 52 with the hole spacing different or the same Winchester 57, 69, 61 with round barrel, 61 with octagon barrel Winchester 69A, 72, 47, 74, 75 Sporter, 75 Target, 77

Q: 4. What Weaver rings are used with this, and does it place the scope over the barrel, or off to the side? Also, how do they mount to it?

A: It is a side mount. Here are the Weaver instructions: https://www.weaveroptics.com/on/demandware.static/-/Library-Sites-HuntShootAccessoriesSharedLibrary/default/dw4bf84159/productPdfFiles/49340_350_8.5x11_INSTRUCTIONS.pdf

Q: 5. So I have a marlin 81 DL untapped open sites only but want to add a scope ...is this what I need and is there another part needed as well If so which part?

A: It is a side mount for a gun with a Weiver mount. Is that what you are trying for?

Q: 6. Will the weaver side mount base #2 mount on a Remington 513T without drilling and tapping?

A: You will have to get your 513T drilled and tapped for a weaver side mount base #2. If you want to mount it on a Remington 513T.

Q: 7. Do the Neutrik NC3FD-L-1 and Neutrik NC3MD-L-1 fit in these panels?

A: The K&M 28312 is compatible with standard chasis mount connectors. This includes the Neutrik connectors.

Q: 8. does this work on the FX3?

A: Yes this will work with the included hande interace,

Q: 9. Will this work on a remington model 41 ?

A: According to Weaver it will not Works with the Remington 10, 11, 12, 34*, 341*, 510, 511, 512 & 521T, 12A, 121 with 3/4" barrels Remington 121 with 13/16" diameter barrels 18, 24 & 241, 33, 513S and 513T, 514

Q: 10. Looking to mount a scope on my 22 Savage 7A. Could I use the #1 base and the 49330 rings ?

A: I would advise checking Weaver's website first and the manual on the site. https://www.weaveroptics.com/bases/detachable-side-mounts/detachable-side-mounts/1000212.html