This pair of black JBL Control 5 passive 2-way loudspeakers offers accurate audio reproduction suitable for broadcast trucks, A/V control rooms, and foreground music systems. Each loudspeaker features a 6.5" woofer and a 1" titanium dome tweeter for high power handling and a frequency response of 75 Hz to 20 kHz. The Control 5 is magnetically shielded for use near video monitors, and can easily be mounted to a tripod, ceiling, rack, or wall for exact positioning and optimal performance.

Spring terminal input connections are on the rear of molded polypropylene enclosure, allowing simple hookup to your existing power amplifier. An integral protection circuit network is utilized to prevent electrical damage to the Control 5's components.

Passive Design    6.5" Woofer, 1" Titanium Dome Tweeter    175W Power Capacity    75 Hz to 20 kHz Frequency Response    Integral Protection Circuit Network    Shielded Magnet Structure    Molded Enclosure    Spring Terminal Input Connections

For use in broadcast trucks, A/V rooms, and foreground music systems

175W power handling

Molded enclosure with shielded magnet structure

Integral protection circuit network

6.5" low-frequency loudspeaker

1" pure titanium dome tweeter

Wide frequency response

Related Questions and Answers

Q: 1. can i use only one speaker to connect to a laptop computer?

A: Yes, you can use a single speaker with a laptop computer.

Q: 2. I was told these speakers can be daisy-chained together. Do these speakers have output?

A: Output power 100 watts at 8 ohms depending on your power amp you could daisy chain up to 4 speakers in one channel of you power amplifier. just keep in mind that the more speakers you add to a single 8 ohm speaker the impedance witll drop from each speaker demanding more power from power amp.8, 6, 4 & 2 ohms on speakers when daisy chanied. this speaker is also 70volt compatible with a 70 volt system you can daisy chain as much speakers as you want but also depends on how much power the 70volt has amp has. Please call B&H pro audio department for furhter questions of before purchasing so we can qualify you .

Q: 3. Can you add a subwoofer?

A: Yes, a subwoofer such as the JBL LSR310S 200W Powered 10" Subwoofer(BH #JBLSR310S) is a great pairing for the JBL 308P MkII Powered 8" Two-Way Studio Monitors. You would feed the subwoofer from your main output signal, then feed the monitors from the subwoofer outputs. Link to LSR310S here: https://bhpho.to/3DCLlTY

Q: 4. Do I need anything else to connect to my Mac Studio? Cables etc

A: Aside from the items included in this JBL 305P MkII Studio Monitor Kit, the only other item you will need is a short standard stereo aux cable such as the Pearstone Stereo Mini Male to Stereo Mini Male Cable - Black, 3' (B&H # PEMMSA103B) which will be used to connect the computer's 3.5mm audio output (headphone jack) to the 3.5mm TRS input on the Senal PMC-II Passive Monitor Controller. If you are using a USB audio interface and want to connect the PMC-II and JBL speakers to the interface, you can use the audio output(s) from the interface and connect them to the right/left XLR-1/4" combo jack inputs OR to the 3.5mm input on the PMC-II Monitor Controller using the appropriate cables (not included).

Q: 5. None of my audio output devices have balanced connections - yet the back of the 305P's only have balanced inputs. If I use, let's say an audio cable that has a TRS connector on end (going to the speakers), and an RCA cable on the other end (going to my audio sources), will this work with the 305's?

A: Yes. This will work using an RCA to 1/4" cable.

Q: 6. Any amplifier recommendations for these narrow pendant speakers?

A: The JBL CSA 280Z Audio Amplifier (2 x 80W) B&H # JBCSA280Z would be a great choice, if you were using two of the JBL 67HC/T Narrow Coverage Pendant speakers at 8 ohms. If you are planning on installing several of the speakers, you can use the 70 volt transformers and tap them up to 60 watts each. In this case, the amp you require would be based on the total wattage needed when you add up the wattage of each speaker in your 70 volt system.

Q: 7. How do these speakers sound without the subwoofer? Asking for video production.

A: The JBL 306P MkII Powered 6.5" Two-Way Studio Monitors are very popular monitors that are commonly used for recording and video production without a subwoofer. The 306P MkII includes a 6.5" woofer and 1" tweeter, and has a frequency range of 39 Hz to 24 kHz (at -10 dB). If your audio has a lot of content in the frequency range below 39 Hz, then you may want to use a subwoofer along with the studio monitors.

Q: 8. What monitors is this compatible with?

A: This kit consists of two studio monitors, which can be used on their own for mixing in a studio or home-studio setting. It is always best to use the same model if you are mixing in surround sound. JBL LSR310S 200W Powered Subwoofer B&H # JBLSR310S is the corresponding subwoofer for this JBL series of monitors.

Q: 9. How long is the included power cable?

A: The included power cable for the JBL 306P MkII Powered 6.5" Two-Way Studio Monitor is approximately 6-feet long.

Q: 10. Do you need to change the fuse to use it with 220v ?

A: Yes, the PreSonus AIR10 2-Way Active Sound-Reinforcement Loudspeakers (Single) will need a different fuse to operate at 220V. The fuse included fuse for operation at 100 to 120V is a T5AL 250V, while the fuse required for operation at 220 to 240V is a T2.5AL 250V.