Hdcp Compliant Lightning To Hdmi Cable

Kramer Pt-2hdmi Hdmi Extender

Product Code: ga6898
Availability: In Stock

$240.00 $343.20

Qty

9 reviews Write a review

Description
Reviews (9)

The Kramer PT-2HDMI is a compact HDMI extender, providing a maximum range of up to 98' (30 m). The device is compliant with HDCP and HDMI v1.2 and is ideal for a wide range of electronic devices that demand digital output, including Blu-ray players, TV boxsets, video game consoles.

98' (30 m) Maximum Range HDCP Compliant HDMI v1.2 Compatible

Parameters
Video Output	HDMI 1.2a, HDCP 1.0/1.1
Video Bandwidth	1.65 Gbps
Format	PC: 640x480 up to 1920x1200 DTV/HDTV Video: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p
Operating Temperature	32-158°F (0-70°C)
Storage Temperature	14-178°F (^-10-80°C)
Power Consumption	5VDC
Power Requirements	2A
Dimensions (WxHxD)	1.9 x 0.9 x 0.6" (4.9 x 2.3 x 1.5 cm)
Weight	0.6 oz (17 g)
Packaging Info
Package Weight	0.1 lb
Box Dimensions (LxWxH)	4 x 3 x 2"

Provides a longer HDMI extension. The PT-2HDMI can extend the maximum cable length to up to 98' (30 m)

Maintains an HDMI single link video resolution of 1080p

Supports the DDWG standard for HDMI compliant displays

Related Questions and Answers

Q: 1. Will this support 1920x1200?

A: System Range : 1080i,1080p, at different distances and BC-DGKat 524.

Q: 2. Does this unit come with a power supply. If not what are the power requirements?

A: The Kramer PT-3U Active USB 3.2 Gen 1 Extender comes with a USB cable which can be used for power, but it does not include a wall brick to connect the USB cable to an AC outlet.

Q: 3. What is the maximum distance achieved using this active extender?

A: The Kramer PT-3U has a maximum range of 4.85 meters at 5Gbps.

Q: 4. Please, how many units can be attached in daisy chain?

A: In theory, until you run into a device that no longer meets the HDCP negotiation or until you run out of keys to negotiate. That said, there is a limit to how much distance you'll get on a particular type of cable. For the most distance, you need shielded cat6 or better.

Q: 5. Can you get this in different colors?

A: Apparently only black right now.

Q: 6. This Kramer claims to boost HDMI signal to increase cable length. To what length? From reviewer comments it seems the cable can additively play a part in boost distance (ie boosted distance + cable capability = total distance).

A: Absolutely. I would not consider a DA a booster but only a DA. For installation I would install the DA as close to the source as possible, no more than a 6' cable and then no more than 50' cable on each output. It is very important to use use high quality cables with any HDMI installation. If you need to go further consider using a twisted pair Rx/Tx setup for best results.

Q: 7. Does it support 4k 12 bit ProRes Raw?

A: Yes

Q: 8. Can it connect hdmi to ethernet

A: No. It connects HDMI to HDMI, like an extension cord.

Q: 9. Does this support 1920x1200?

A: Yes, the Kramer HDMI over Twisted Pair Receiver supports 1920x1200.

Q: 10. Since it supports 4K HDR, I assume Dolby Vision will work as well? Ordered it for delivery Dec. 1

A: Yes, Dolby Vision will work.

Patrick	24/09/2024
Easy to install. Little to no maintenance needed on these 5

zippy	06/08/2024
Used to run a 40' hdmi line that was dropping out. This solved the problem and now the projector will pick up hdmi input. Absolutely no loss of signal at all. 5

Mike	08/07/2024
This Receiver/Transmitter pair really just makes a long (up to 295ft) HDMI cable. Nothing to 'install' as much as just 'plug in'. You'll need an HDMI cable at each end - plan accordingly. Use shielded cable! 5

ahinesobc	16/06/2024
Need to send video beyond the limits of HDMI? Look no further... This hardware just works. 5

MACDdaddy	29/05/2024
Worked great. These work in pairs the PT-571 is the transmitter. You also need the the PT-572+ the receiver end. Our church uses 2 pairs of these. The one for our projector has been in use for more ten 2 years no issues at all. Rob 5

Tom	21/05/2024
I'm using 571/572s for video, with audio going to mixer and house speakers. Video and audio are not in synch. Presonix mixer has no function to delay audio. Help, anyone? 5

Woodrow	19/05/2024
Used in a church sanctuary with DGK6 cable. Signals are excellent. Red/Orange/Green indicator is especially handy as well as the surface mounting hardware. 5

Theodore	17/04/2024
I have several pairs of PT-571/PT-572+ transmitter/receivers. They work the first time... every time. Picture and sound are great. Very little delay. I have cable lengths as long as 250 feet. 5

Jon	01/04/2024
These little pico tools from Kramer are an excellent solution at a good price point. Using these with 572 receivers and a Kramer 2x4 HDMI distro on the front end to send presentations to three screens over 100' of qualified (Kramer uniKat) CAT6 cable. It just works. No latency, no glitching, no resolution limits up to and including 1920 x 1080. Rack amount accessories make for a clean, manageable installation. The 572 receivers get power over ethernet, so no wall wart required at the receiver end. 5