This 230 VAC ARRI Softbank III Plus 4-Light Kit includes barndoors, filter frames scrims, a softbox, light stands, 230 VAC bulbs, an accessory kit, and a heavy duty wheeled case.

The ARRI 300W Plus Fresnel is designed to gather as much light as possible and direct it through the 3.2" (81.2 mm) low expansion, borosilicate Fresnel lens producing a soft, even field of light. The beam spread is 15-55°

The 650W Fresnel features the same lens, reflector, housing and power cord as the 300W Fresnel. The beam angle in the flood position is 54° and a narrow 13° in the spot position.

The ARRILITE 750 Plus from ARRI is an enhanced version of the tried-and-true ARRILITE open-face line. ARRI started with the basic design of the ARRILITE 800 and optimized the reflector to increase output 21% using a 750W HPL lamp which employs a compact filament that concentrates and augments light while increasing efficiency. The result is almost double the output. A redesigned one-arm stirrup instead of a yoke facilitates greater movement while the dedicated accessory holder allows use of Chimera softboxes without a speed ring.

2 x 300W Fresnels    1 x 650 Fresnel    1 x ARRILITE 750 Plus Focusing Flood    Barndoors, Filter Frames    Scrims, Stands, 230 VAC Bulbs    Accessory Pack    24 x 32" Softbox, Heavy Duty Case

The 24 x 32" Chimera Video Pro softbox provides soft, flattering light for talent and pleasing catch lights for reflective objects.

Use the barndoors and scrims to alter the shape and intensity of the lights. The included filter frames are ideal for color effects filters or diffusion.

ARRI lights are renowned for even beam spread, high efficiency, and superior spot-to-flood ratio.

Includes a bag, clothes pins, bulb storage case, 3-outlet extension cord, and heat-resistant gloves.

Offer lightweight, yet sturdy support to a height of 8.6' (2.6m)

The case employs a hard plastic shell, aluminum trim and latches, and a piano hinge. It features interior dividers and wheels for easy storage and transport.

Related Questions and Answers

Q: 1. Does it come with a bulb inside? Or do you need to order the 750w bulb separately?

A: The bulb is not included with the Arri Arrilite 750 Plus light fixture. You would have to purchase the bulb separately. As listed under the Accessories tab, I would recommend the Ushio HPL+ 750W Lamp (750W/120V), B&H# USHPL750, for your stated needs.

Q: 2. Does this kit come with a speed ring for the Chimera soft box?

A: Yes, the speed ring also holds the barn doors. Important to note that the speed ring is for the 750watt fixture only.

Q: 3. Will the speed ring that comes with this light accept medium Quartz + Daylite softboxes from Chimera as well?If not, what is the speed ring diameter for this light, so I can seperately purchase one that fits my needs?

A: As the ARRI Arrilite 750 Plus comes with an accessory holder that allows you to use softboxes without speedrings, if you are referring to either the Chimera Quartz Plus Softbox - Medium - 36x48 (90x120cm), B&H # CHQPBM, or the Chimera Quartz Plus 1 Bank - Medium - 36x48 (91x122cm), B&H # CHQP1BM, then yes, both should be able to connect to the Arrilite 750 without the purchase of a separate speedring.

Q: 4. Is there anyway to make these lights produce 5600k instead of 3200k? Is there a lamp compatible for producing daylight for this

A: You can use the Visionsmith ReLamp 1K LED for ARRI ST1, Mole Baby 1K & DeSisti 1K Fresnels (Daylight), BH # VIVSEGTD in place of a standard tungsten halogen lamp. https://bhpho.to/2ZrJxIm

Q: 5. How many amps does this draw ?

A: approx 41 amps at 120 volts

Q: 6. This kit comes with the Chimera Speed ring adapter correct?

A: Yes. That is correct! The ARRI Softbank D1 Three-Light Kit B&H # ARSBD1WCK MFR # LK.0005645 comes with The ARRI Speed Ring for 650W Fresnel B&H # ARCSRF650 MFR # L2.0005123

Q: 7. two questions really1. Is there an accessory i can pick up that will allow me to use a westcott parabolic umbrella easily with this (pointing the 750 into the umbrella or shooting through it)? My lightstand will be an impact branded chrome c-stand.2. im going to be shooting primarily outside and would like to daylight balance the light. I know this can be done with gels. The question i have is where and how to mount the gels w/o melting them.Thanks!

A: 1. This is a hanging fixture. You'd have to find some kind of adapter to change it to a stand mount. A 750W fixture is also possibly a bit too hot for your umbrella. You might consider a diffusion gel instead.2. For the gel, you'd want to use no-drip, fire resistant certified gels (Apollo, Rosco) & a gel frame available many places including B&H I'm sure. Check the diameter of the hole of the frame to be sure it is going to let most of your light thru, but you can use a generic gel frame.

Q: 8. How do I attach the Chimera to the adaptor? It doesn't make sense! Send tutorials- please!

A: Chimera has some good instructions on the assembly and removing of the speedring from the softbox.The link is http://bit.ly/2fasMKJ and the tab you need to click is, Assembly & Take Down.

Q: 9. Does this come with a speed ring for the Chimera?

A: The speed ring is mounted on the 750 fixture. The chimera only works with the 750 in this kit.

Q: 10. What external dimmer is used with this light?

A: The Mole-Richardson Molestat 2500 Watt AC Dimmer (120V AC), B&H # MOMSD2500, would be the correct dimmer recommended for use with the ARRI Arrilite 2000 Plus.