The HDNeT-4P 4 x 1 HDMI Switcher from Smart AVI allows you to connect up to four HDMI appliances to one monitor, HDTV, projector, or other type of HDMI display. The Switcher supports HDCP so that you will be able to watch copy-protected content such as commercial Blu-ray DVDs. It features EDID (Extended Device ID) learning so that the specifications of your display can be relayed accurately back to the sending device during the initial "hand-shake" process. EDID helps ensure video and audio play back reliably and at the highest mutual quality shared between the sending and receiving device.

The HDNeT-4P can be controlled locally via two front panel buttons or using the IR remote, or it can be connected to a third-party RS-232 control system for remote or centralized operation. In automatic switching mode the switcher will automatically switch to the next device when the device connected to the input above it is powered off.

Connect up to 4 Devices to 1 Monitor    4 HDMI Inputs and 1 HDMI Output    Supports up to 1080p Resolution    HDPC Compliant    EDID Learning    Two Front Panel Buttons    IR and RS-232 Controllable

Connect four HDMI components to one HDTV monitor or display

RS-232 switching control

IR switching control

Front panel switching control

EDID learning of any monitor

Maintains 480p, 720p, 1080i, and 1080p video formats

Supports HDMI 1.3 digital audio format: LPCM, Dolby-AC3, DTS7.1, or DSD

ATC and HDCP compliant

Supports DVI-D

Related Questions and Answers

Q: 1. Does this have all 5 inputs on the back (as shown on the manufacturer site) or is one on the front?

A: I/O;Five HDMI inputsOne HDMI output

Q: 2. Someone asked me if they could use 1 port of the splitter for a wireless connection to laptop? I can't imagine that's possible.

A: Yes, you can use the HDMI input of the Kopul HDMI 2.0 5 x 1 Switcher with a laptop/computer that is set to output the supported input formats (listed below). The use case would be for sending a computer's output to multiple monitors. Please note, the signal would be a duplicate of the input signal and would display on up to five (5) target sources. Supported input video formats include: HDMI (4:4:4/4:2:2/4:2:0 RGB, YUV, YCC) DCI 4K at 50/60 fps UHD 4K 50/60 fps 1080p 50/60 fps 1080i 720p 576p 480p 480i / 525 lines 576i / 625 lines

Q: 3. Will this output 4K? One of the reviews says it doesn't.

A: The Kopul HDMI 2.0 5 x 1 Switcher is rated for 4K. Be sure to match the video specifications of all your devices in order that everything works as intended.

Q: 4. Will it cause damage to keep this powered on 24/7/365? We have it installed in our employee training room (auditorium).

A: Yes, the KanexPro 8K HDMI 2x1 Switcher should operate without fail 24/7. I would recommend having a spare on hand if it is a mission critical part to your training room.

Q: 5. Will this allow me to switch between two simple camcorders (Sony HDR-CX405) and send the signal to a monitor?

A: Yes, the Kopul HDMI 2.0 5 x 1 Switcher would allow you to connect up to five HDMI sources, and toggle between the connected sources. You could output this to an HDMI monitor.

Q: 6. Will this pass through Dolby Vision and Dolby Atmos?

A: NO it will NOT

Q: 7. does the signal hold on an inactive port? meaning if I have a computer connected to input 1, and I switch to input 2, does the computer on input 1 think that it has lost the connection?

A: We are not sure of the process but we know that you do not lose the signal and that you can switch back and forth at any time.

Q: 8. Is the tearing a quick dip to black, blue or distortion effect on black?

A: IOGEAR says : Thank you for choosing IOGEAR and we apologize for the inconvenience. To better service you and understand your set up, please feel to contact our customer support at 1-866-946-4327 or email us: support@iogear.com. Once again, thank you for choosing IOGEAR.

Q: 9. Does it work bi-directionally? That is, will it switch one source to 3 different displays?

A: We're afraid not. This will allow you to switch between 3 different sources on 1 display. To send one source to multiple displays you need a Splitter, not a switcher. Kanexpro offers B&H # KASPHD201X44, which is a 1x4 HDMI Splitter that is 4K. https://bhpho.to/2JeEMdW

Q: 10. Can it be set to always switch manually? I don't want it to switch automatically when a new source is connected. But I don't want to have to set this option every time I use it... How does it work?

A: hi from remote control can not change.i now if you off source 1 it will go to souce 2 auto