The Dalite 69 x 92" Model C Manual Front Projection Screen is a perfect choice for either a large lecture or seminar hall, or conference/training room. The screen is designed for heavy use and features lubricated steel ball bearings for a smooth operating system. The screen is accessed via a pull cord.

The CSR mechanism was designed to provide a smooth and safe way for the screen to be retracted into its case. This kind of consistent operation ensures a longer life for the screen. Screens with CSR must be fully extended since there are no intermediate stopping positions.

As an option, you can purchase the screen in any one of seven veneer finishes to give it a more professional, finished appearance. If you prefer not to choose a veneer or laminate, the screen will come with a white casing. In addition, you can also purchase floating brackets which allow the screen to be either wall or ceiling mounted but which also give you the freedom to align the system left/right.

Wall or Ceiling Mounted / Non-Tensioned    120" Diagonal / Video Format    4:3 Aspect Ratio    Matte White HC Finish / Front Projection

Permanently lubricated steel ball bearings combined with nylon bushings and heavy-duty spring assembly offers smooth operation even in demanding applications

Optional floating mounting brackets allow the Model C to be mounted onto wall or ceiling studs and aligned left or right after installation by releasing two sets of screws

Matte White fabric up to and including 10' high will be seamless

Glass Beaded fabric up to and including 8' high will be seamless

Video Spectra 1.5, High Contrast Matte White and Silver Matte fabrics available in sizes up to 8' high

Related Questions and Answers

Q: 1. Hi. Please, what is the length of the rods?

A: According to manufacturer it is 39" long.

Q: 2. What are the dimensions when it's collapsed and folded for transport?

A: The Elite Screens 92" (16:9) Portable Instant Pop-Up Indoor Movie Theater Projection BH #ELPOP92H package dimension is almost 1" in thickness by 32" in diameter.

Q: 3. will this fit nikon d3300 kit lens af-s nikkor 18-55mm 1:3.5-5.6G ?

A: It fit my stock lens 18 - 55 mm 1:3.5-5.6GII. When putting it on twist slightly counter clockwise to align then clockwise till it locks.if the lens feels loose you haven't turned it quite far enough.

Q: 4. Can I mount this to a Hensel flash if I have a speed ring?

A: Yes. You can use it on Hensel flash if you have this speed ring for it https://www.bhphotovideo.com/c/product/1352664-REG/elinchrom_el26544_rotalux_speedring_f_hensel.html

Q: 5. specs of Eye Relief is ...?

A: Eye Relief 202.0 mm Explore Scientific EPWP9217-01 Specs Focal Length 17mm Apparent Field of View 92° Eye Relief 202.0 mm Eyepiece Barrel Diameter 2" Field Stop Diameter 19.6 mm Dimensions Not Specified by Manufacturer Weight 2.6 oz / 73.7 g

Q: 6. Terminating switch instructions

A: 3-conductor 20-24 gauge wire can be used in place of the supplied RJ-14 cable to connect the wall switch. Connect the BUS terminals on the wall switch to the corresponding BUS terminals on the splitter board. Please contact Da-Lite directly for a wiring diagram: Da-Lite: Tel: 800-622-3737 or 574-267-8101 Email info@da-lite.com

Q: 7. Can I use this with Bowens type flash head?

A: Yes, since you have to buy the appropriate speed ring to use it with any flash head. For Bowens-S, you'll need this additionally: https://bhpho.to/39y8rOk

Q: 8. What is the weight of the screens? I may want to mount these to a wall.

A: This screen weighs approximately 10 pounds.

Q: 9. Hello, I have the Explore Scientific AR152, 988mmFl refractor telescope with the 2" diagonal. Is this eyepiece too heavy for my focus tube and Diagonal? thank you.

A: This Eyepiece would not be too heavy.

Q: 10. What are the dimensions of the screen?

A: Viewing Size: 53.9" H x 95.9" W. Overall Size: 95.0" H x 103.0" W x 10.2" D