The Bolt VS-560N Wireless TTL Flash is a shoe-mounted flash unit designed to work with Nikon's i-TTL metering system and features wireless TTL slave functionality. The flash has a guide number of 141' at ISO 100 and 50mm setting, giving it good power within its zoom range of 24-105mm. The head also tilts up 90° and swivels 120° to the right and 180° to the left. Additionally, the VS-560N has a PC sync port that allows for remote triggering of the flash and an HV port for external power connections.

A variety of settings and features can be accessed from the 1.8" backlit LCD screen located on the rear of the flash. This is where you can set TTL settings or even place the flash in manual mode with a power setting between 1/1 to 1/64. The VS-560N is also capable of high-speed and second-curtain synchronization, allowing for more creative shooting techniques and it has built-in reflector and diffuser panels to further enhance its capabilities. The flash runs on 4 AA batteries and comes with a stand.

Compatible with Nikon i-TTL    Wireless TTL Functionality Up to 33'    Guide Number: 141' at ISO 100 and 50mm    Zoom Range: 24-105mm, 18mm with Panel    Tilts 90° and Swivels 300°    1.8" Backlit LCD    Manual Control: 1/1 to 1/64 Power    High Speed Sync Up to 1/8000 sec    PC Sync and HV Power Ports    Built-In Reflector and Diffuser Panels

Guide Number at ISO 100
24mm: 112'
28mm: 118'
35mm: 125'
50mm: 141'
70mm: 148'
85mm: 154'
105mm: 164'

Compatible with Nikon's i-TTL metering system

Flash coverage can be expanded to 18mm with the use of the built-in diffuser panel

Flash duration of 1/1,000 to 1/20,000

Flash recycle time of 0.5 to 9 seconds with Ni-MH batteries

1.8" backlit LCD display with updated button control scheme

The adjustable five-position flash head can be tilted up 0-90°, left 0-120° and right 0-180°

It has a motorized automatic and manual 24-105mm zoom head

Seven manual mode power output settings of 1/1, 1/2, 1/4, 1/8, 1/16, 1/32, and 1/64

Optical pulse wireless TTL with a range of up to 33' with 4 channels and 3 groups

Slave timing modes include instant sync, skip one pre-flash, and skip two pre-flashes

Autofocus assist light for working in dim conditions

This flash supports both high speed and rear-curtain sync for more speed and flash control. It supports high-speed sync up to 1/8000 second--with cameras that support this speed--for shooting outdoors at wide apertures and fast shutter speeds, helping you to freeze motion better

Flash exposure compensation of ±3 in 1/3 EV steps

PC sync port for additional camera connection options

Automatic power-saving function takes effect after 3 minutes of inactivity

Locking hot shoe

Flash ready light and test button

Included flash stand features a 1/4"-20 thread for mounting on a tripod

Can work with an optional external power pack through the use of the HV power port

Related Questions and Answers

Q: 1. Will this work with Sony RX10?

A: This flash has the Sony/Minolta shoe and will not work directly with the Sony RX10. You will need the following adapter to use this flash on the RX10: a href= http://bhpho.to/1cjK16q target= _blank http://bhpho.to/1cjK16q/a

Q: 2. Is this flash compatible with the Nikon D5000 camera???

A: Yes, the Bolt VS-560N Wireless TTL Flash for Nikon is compatible for use with the Nikon D5000 DSLR camera.

Q: 3. Is it OK on a 5D?

A: Yes, the Bolt VS-560C Wireless TTL Flash for Canon is fully compatible for use on the Canon EOS 5D DSLR camera.

Q: 4. Is this wireless flash compatible with the New Nikon D500 without having to buy Nikon WR 10/ WR T10/WR A10 wireless adaptor set?

A: The WR10/WRT10/WRa10 will not help any flash other than the SB5000. It acts as a radio transmitter to communicate with the SB5000 only and only on the D5 and D500. This flash, the Bolt 560N is an infrared wireless flash. It will need either another flash that has wireless TTL master capability or an infrared transmitter such as Vello FWIRC-N to trigger it. Alternatively, you can use an external radio trigger system with a transmitter on camera and a receiver underneath the flash.

Q: 5. would this work with the sony a7ii? what is the trigger voltage of it?

A: No, the flash does trigger but the TTL is not functioning properly.

Q: 6. Does this work for a Canon 6D?

A: I have a 3 Ti. Therefore dlo not know if works with s 6DSorry

Q: 7. I want to be able to use this flash off-camera. I have a Sony a57. What, if any, extra accessory do I need?

A: The flash is compatible to work with the Sony A57 off camera.You do not need any other items. Note It uses infrared signals to control the off camera flash, that it is line of site and outside in very bright light the flash might not see that signal.You will need a stand and bracket to hold the flash off camera.This is a kit with a bracket, stand and umbrella,Impact Zack Arias OneLight Accessory KitB&H # IMZALK Mfr # ZA-LKhttp://bhpho.to/1qDPRIYAnd this is the links if you just want a stand and bracket, http://bhpho.to/1jwU7ql and http://bhpho.to/18tPisN.

Q: 8. Will this work with the Sony A77?

A: Yes, this flash is fully compatible with the Sony A77 camera.

Q: 9. I forgot to ask, I ordered this flash but my A7r has the multi-interface shoe. So I neglected to get an adapter. Which adapter do I need for this flash? Thanks.

A: You would need the Sony Multi-Interface Shoe Adapter.

Q: 10. will this flash work with ttl on the sony a6000? sony a77II?

A: Yes full TTL and HSS.Just use the ADP-MAA hotshoe adapter.