Interface Cable Usb

Smart-avi Sdx-plus-rx Extra Long Range Dvi-d, Usb Keyboard And Mouse, Rs-232, And Audio Receiver

Product Code: ga70186
Availability: In Stock

$1,098.75 $1,417.39

Qty

2 reviews Write a review

Description
Reviews (2)

The SDX-Plus-RX Extra Long Range DVI-D, USB Keyboard and Mouse, RS-232, and Audio Receiver from Smart-AVI uses HDBaseT technology to receive DVI-D signals from up to 400' over a single CAT5/5e/6 cable. It also supports USB keyboard and mouse, audio, and RS-232 signals reception, giving users the ability to control displays or devices remotely. However, SDX-Plus-TX transmitter is required at the display end for this remote controlling.

Video
Format	DVI-D single line
Maximum Pixel Clock	165 MHz
Interface	1 x DVI-D 29-pin female
Resolution	Up to 1920 x 1200 @ 60 Hz and up to 4K/2K (3840 x 2160) @ 30 Hz
DDC	5 Vpp (TTL)
Input Equalization	Automatic
Output Cable Length	Up to 20' (6 m)
RS-232 Serial Interface
Interface	1 x DB9 (female) with supporting speed of 115 kb/s
USB
Interface	2 x USB type B (female)
Signal Type	OHCI/UHCI (USB 1.1)
Others
IR	Interface: 1 x 3.5 mm (female) Frequency Response: 30 to 80 kHz
Power	External: 100 to 240 VAC / 5 VDC, 3 A @ 20 W
Operating Temperature	32 to 131°F (0 to 55°C)
Storage Temperature	-4 to 185°F (-20 to 85°C)
Humidity	Up to 95%
Dimensions	8.3 x 1.0 x 3.6" (21.1 x 2.5 x 9.1 cm)
Weight	1.0 lb (0.5 kg)

Receives DVI-D signal for up to 400’ (120m) from the source
Data recovery for digital video
Supports up to 1920 x 1200 digital video resolution @ 60 Hz
Supports 4K/2K (3840 x 2160) video resolution @ 30 Hz
Automatic DDC Learning
USB keyboard and mouse extension
Uncompressed video using HDBaseT technology
IR and RS232 extension allows for remote control of displays
Powered via external power adapter
Plug-and-play ready
Designed and manufactured in USA

Digital Signage
Security
PC Networking
Conference Center Systems
Point of Sale
Camera Surveillance
Video Phone
Control Room Systems
Recording Studio
PC KVM Extension

Related Questions and Answers

Q: 1. What other equipment do I need to have the camera on a tripod and use the DJI LiDAR Range Finder?

A: The DJI LiDAR Range Finder for RS 3 Pro & RS 4 Pro would require the DJI RS 3 Pro Gimbal Stabilizer Combo, B&H # DJRS3PC, or the DJI RS 4 Pro Gimbal Stabilizer Combo, B&H # DJRS4PC, which comes with a focus motor. The gimbal has a tripod mount that you could use to attach it to a tripod.

Q: 2. Will this also take care of active track without Raveneye?

A: Yes, The DJI LiDAR Range Finder for RS gimbals would also provide motion tracking data to the gimbal. The LiDAR Range Finder (RS), RS 3 Pro supports ActiveTrack Pro, delivering better subject identification and tracking performance.

Q: 3. will this be able to focus with a diopter filter +1 or +2?

A: The minimal focal distance of the DJI LiDAR Range Finder for RS 3 Pro is 0.7m to 1.2m away form the sensor, so as long as the motor is calibrated correctly and the Lidar can see the subject, the DJI LiDAR will be able to pull focus to the subject whether the lens has a diopter mounted to it or not.

Q: 4. Is the Lidar frequency closer to 905 or 1550 nanometers?

A: DJI does not provide any information about the DJI LiDAR Range Finder frequency range.

Q: 5. Will the rangefinder work with the focus motor also when not connected to the gimbal? Eg tripod shots, handheld shots etc on different rigs without gimbal?

A: At this time, DJI has only recommended support for the DJI LiDAR Range Finder for DJI RS stabilizer systems.

Q: 6. Wich lenses can the rangefinder interface directly connect to via 4-pin lemo to not need to calibrate the lenses? Would Cooke /I and Zeiss/XD work via 4-pin lemo port?

A: So far, these are the lenses that have been announced as working with the DJI LiDAR Range Finder for RS (B&H# DJRSRF) without calibration, and none other: DZOFilm VESPID Cyber Full Frame 35mm T2.1 Prime Lens (PL & EF Mounts) (B&H# DZOVC03521) DZOFilm VESPID Cyber Full Frame 50mm T2.1 Prime Lens (PL & EF Mounts) (B&H# DZOVC05021) DZOFilm VESPID Cyber Full Frame 75mm T2.1 Prime Lens (PL & EF Mounts) (B&H# DZOVC07521)

Q: 7. Is this the same as the new DJI Lidar Pro?

A: The DJI LiDAR Range Finder for RS 3 Pro increases the ranging points from 43.200 to 76.800 ranging points. The additional ranging points would mean the new Lidar focus Pro will be more accurate. Also, the maximum range has been increased from 46 feet to 65 feet. The Lidar Pro also has support for human and vehicle recognition.

Q: 8. Does it work with other DJI gimbals?

A: The DJI LiDAR Range Finder is only compatible with the DJI Ronin 4D.

Q: 9. Doesn't this come with the base 4D camera? If it's only compatible with the 4D and comes with it, why is it sold separately?

A: The DJI LiDAR Range Finder is offered separately since it is a very important component of the 4D system. This allows the user to have a back-up or a replacement for one lost or damaged.

Q: 10. Is there way to control active track pro via lidar from the DJi high bright monitor?

A: Yes, DJI Transmission to a High-Bright Monitor supports LiDAR focusing. DJI Master Wheels and other DJI PRO ecosystem products are also supported. You can learn more here: https://www.dji.com/transmission https://store.dji.com/product/dji-transmission-combo?vid=116751

Geoffrey	29/08/2024
My old Yamaha Receiver was struggling to support 4K TV. For example, high res Netflix sound stopped working and lacked 4K upscaling support. I had this new receiver up and running with 5.1 sound support in less than 30 minutes. I then reprogrammed my Harmony Hub Remote to control the receiver + AppleTV + Samsung 4K TV. Picture and sound are both excellent and I love the addition of Bluetooth IN and OUT support. Love SCENE control programming. Picture quality out of my 4K Apple TV is better than ever. Even better than direct-connect to TV. My Youtube TV and Youtube looks and sounds great. Highly recommended. 5