The SDX-2P-RX Dual DVI-D, Dual RS-232, USB Keyboard and Mouse, and Audio Receiver from Smart-AVI uses HDBaseT technology for receiving dual DVI-D signals from up to 400' over two CAT5/5e/6 cables. It also supports USB keyboard and mouse, audio, and RS-232 signals reception, giving users the ability to control displays or devices remotely. However, a SDX-2P-TX transmitter is required at the display end for this remote controlling.

• Receives dual DVI-D signals for up to 400’ (120m) from the source
• HDCP Support
• Supports up to 1920 x 1200 digital video resolution @ 60 Hz
• Supports 4K/2K (3840 x 2160) video resolution @ 30 Hz
• Automatic DDC Learning
• USB keyboard and mouse extension
• Receives uncompressed video using HDBaseT technology
• RS232 reception allows for remote control of displays
• Powered via external power adapter
• Supports stereo sound
• Compatible with Windows, Mac, and Linux operating systems
• Designed and manufactured in USA

• Digital Signage
• Security
• PC Networking
• Conference Center Systems
• Point of Sale
• Camera Surveillance
• Video Phone
• Control Room Systems
• Recording Studio
• PC KVM Extension

Related Questions and Answers

Q: 1. How do you control focus with RSC 3 Pro?

A: There are a number of ways you can control focus with the DJI RS3 Pro. Using the front dial on the gimbal would be the most popular way to control focus since it is an included feature with the RS3 Pro Gimbal. Rotating the front dial allows you to control zoom or focus. It can also be customized to control the camera's shutter, aperture, ISO, or gimbal movements, making it exceptionally convenient for single-handed operation.

Q: 2. What is the proper signal receiver for this transmitter?

A: The Ocean Matrix 4K HDMI over HDBaseT 2.0 USB KVM Receiver with Two-Way IR, RS-232, CEC & PoC would be a good pick. See: https://www.bhphotovideo.com/c/product/1585354-REG/ocean_matrix_omx_01hmbt0003_r_4k_hdmi_over_hdbaset.html

Q: 3. So if I own the saramonic receiver with 2 mic set, can I add this receiver to use each mic on a separate channel? For example if I use the saramonic sr-ax100?

A: If you already own a Blink 500 system with one RX500 camera mount receiver, then yes you can add another RX500 receiver and connect two separate lav channels into the SR-AX100. By selecting the stereo output switch on the SR-AR100, you will get two separate channels of audio into the camera.

Q: 4. Can i mount a battery through a nato rail on the extension arm ?

A: The extension arms also offer 1/4"-20 and 3/8"16 threaded holes and shoe mounts for accessories, so you would be able to mount a battery on the arms.

Q: 5. Can this product be tuned to 806-809 MHz for use when traveling to Japan?

A: Yes.

Q: 6. Is it safe to use the handles inverted yet the gimbal stays in the upright orientation? If so, does it matter then which handles goes on which side? Should I just rotate the arms to put the NATO handles on top. Or should I put the left arm in right side and the other on left side to keep the nato locking pin on top always?

A: The handles included in the DJI R Twist Grip Dual Handle for RS 2 & RSC 2 kit can be safely used on the top or the bottom rail of the extension arms. Also, the left extension arm can also be used alone to hold the gimbal underslung, in "briefcase" mode, for low-angle shots.

Q: 7. Are those arri-style connections on the arms? (I'm referring to what looks to be a threaded hole with 4 surrounding holes that appears to be for locating pins). If it's not this, then what connection type is this?

A: Those are Hirth tooth AKA Arri Rosette.

Q: 8. Can one transmitter be paired with two receivers for audio monitoring?

A: No, the Saramonic Blink 500 RX Dual-Channel Camera-Mount Digital Wireless Receiver (2.4 GHz) can only be paired to one receiver.

Q: 9. What does this dual handle grip weigh? It would be great to know the added weight to the gimbal.

A: Unfortunately, DJI does not publish that spec and we currently have no verification method, as this unit is out of stock as of this writing and is expected back in between one and two weeks.

Q: 10. Can this receiver be interchanged with the transmitters from the USB-C kit?

A: Yes. The two receivers are essentially the same but have a different output connector.