You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Blonder Tongue Catv Channelized Audio/video Modulator With Saw Filtering (channel 53)

Blonder Tongue Catv Channelized Audio/video Modulator With Saw Filtering (channel 53)
  • Product Code: ga70258
  • Availability: In Stock

$449.85 $562.31

The CATV Channelized Audio/Video Modulator, Channel 53, from Blonder Tongue is an all-solid-state audio/video modulator that provides a modulated visual and aural RF carrier output on one specific CATV channel. The unit modulates the audio and video inputs and provides the requested RF CATV channel output for use in a CATV, MATV or SMATV system. The modulator accepts standard (sync negative) polarity video at a 0.7-2.5V peak to peak level from sources such as a TV camera, video tape recorder, TV demodulator or satellite receiver.

The modulator features a +55dBmV RF output level, and an IF SAW filtering for adjacent channel operation. All aeronautical channels are offset positive with a tolerance of ±5kHz as required by FCC 21006. All level controls are located on the front panel. The RF level control provides up to +55dBmV output. The video modulator control sets the depth of modulation for 87.5% over an input video level range from 0.7VP/p to 2.5VP/p. An audio modulation control permits adjustment for ±25kHz peak deviation of the aural carrier.

RF Specification
Frequency RangeCATV channel 53
Output Level55 dBmV, minimum
Output Level Range15 dB
Audio/Video Carrier Ratio Control-7 dB to -20 dB
Frequency Tolerance±10 kHz standard channels, ±5 kHz FCC 21006 offsets
Audio Carrier Frequency Setting±1 kHz maximum, 4.5 MHz above video carrier
RF to Video Response1 dB P/V from Fv -0.5 MHz to Fv +4.2 MHz
Broadband Noise-90 dBc
Spurious Output-60 dBc in 50 to 860 MHz Range @ +55 dBmV output
Output Match (Return Loss)12 dBc
Vestigial Sideband Response@ channel edge -20 dB, @ adjacent channel -40 dB
Video
Input0.7 to 2.5 V peak to peak for 87.5% modulation
Input Return Loss18 dB
Carrier-to-Noise Ratio62 dB in 4 MHz bandwidth
Hum Ratio60 dB peak to peak video to 60 Hz RMS
Differential Gain5% at 87.5% modulation
Differential Phase5° at 87.5% modulation
Group Delay170 ±50 nS
Audio
Input Impedance10 kΩ, unbalanced
Input140 mV RMS for 25 kHz peak deviation
Frequency Response±1.0 dB (50 Hz - 15 kHz referent to standard 75 msec pre-emphasis)
Intercarrier Stability4.5 MHz at ±5.0 kHz
General
Power Requirements105 - 130 VAC, 60 Hz, 10.5 W
Temperature Range0 to +50°C
Connectors
Audio InF-type female
Video InF-type female
RF OutputF-type female
RF Output TestF-type female -30 dB
AC OutletFemale AC outlet 600 VA maximum
Mechanical
Line Cord6' power cable: 3 wire grounded, 3 wire convenience outlet
Dimensions19 x 1.75 x 3" (48.26 x 4.44 x 7.62 cm)
Weight4 lb (1.8 kg)

Meets FCC docket 21006 aeronautical frequency offset requirements

Fully compatible with BTSC encoded stereo audio

Front panel accessible level controls for easy set-up and adjustments

AC outlet

Related Questions and Answers

Q: 1. Are the inputs a mic or line? Can a microphone cable be plugged into this unit and be heard from the speakers? Thanks.

A: The Wohler VMQ4 4 Channel Audio Monitor is expecting a line level signal into its Phoenix input connections and would not power a microphone directly.

Q: 2. does it have 2 seperate audio programe monitoring?

A: You get simultaneous monitoring of up to four audio sources on four analog inputs with voice quality fidelity.

Q: 3. which norm handles? pal-B/G pal-N or NTSC? thanks.

A: The Blonder Tongue CATV Channelized Audio/Video Modulator with SAW Filtering SAW is NTSC only.

Q: 4. Is their a Speed ring made to fit a Dynalite SH2000 Flash Head?

A: The Rotalux speedrings are available also for Profoto, Alien Bee, Bowens, Broncolor, Hensel and Comet. As far as I know.

Q: 5. Which year produce this model?

A: Roland released this product in 2018.

Q: 6. What is the difference between this one and the older version that was recently discontinued ?

A: The only difference between the older (now discontinued) Elinchrom Rotalux Softbox Octa (53 ), B&H # ELSBRJO53, and the current Elinchrom Rotalux Octabox (135cm / 53 ), B&H # EL26647, is the original softbox included the Elinchrom speedring which was only compatible with Elinchrom strobes. The current softbox does not include a speedring. As such, you must purchase the speedring separately, but Elinchrom manufactures speedrings for multiple brands which may all use the above softbox. Otherwise, the softboxes are the same.

Q: 7. Does this model switch to walking mode if used handheld?

A: The Garmin Drive 53 and Traffic GPS Navigator does not automatically switch to Pedestrian Mode when used handheld, however directions can be customized for walking.

Q: 8. I'm told this is a "Strobe" light but can it be used as a constant for video production?

A: This is a softbox which fits Elinchrom flash heads and it is not rated for use with continuous lights.

Q: 9. Is it work over Internet? Then Please send me how it pair with its encoder.

A: Yes, this decoder is Wi-Fi enabled and can be accessed via web browser or iVMS 4200 client software. Detailed instructions can be found in this doc on pgs 13-20: https://us.hikvision.com/sites/default/files/ud05526b_baseline_user_manual_of_ds-6900udi_series_decoder_v2.1.0_20170713_0.pdf

Q: 10. Can residential input coaxial cables (TV, weather station, etc) convert directly to RJ45/RJ11 connector for indoor weather station console? VideoEase CATV Balun II appears to do this. Thank you...

A: Yes, you are able to use your standard coax cable and convert the signal to RJ-45.

25/08/2024

I bought this unit about 3 weeks ago. I hate using my phone as a GPS on trips and I had an older Garmin that I broke the port on so I couldn't update the maps anymore. I'm really impressed with the unit and would recommend it without hesitation. The only thing I didn't like compared to my old Garmin...is that my old Garmin was a beefier material and seemed a little more heavy duty. That said...if you take care of it properly....that shouldn't be an issue at all.

5
16/08/2024

Well constructed.

5
08/08/2024

Very up to date on locations. Very fast operation.

5
27/07/2024

Well made. Work great for micro photography.

5
26/07/2024

double direction clamp! It's very useful clamp with long rail.

5
09/07/2024

I am using this bidirectional clamp, in combination with the Sunwayfoto DPG-80D Universal Double Dovetail, to replace the clunky and hard-to-use mounting mechanism, on a Glidecam XR-1000. It radically speeds up the process of balancing a camcorder on the Glidecam, and makes it possible to dismount and remount the camera quickly and avoid having to spend half an hour finessing the balance all over again. It's a huge improvement.

5
22/06/2024

I purchased this clamp as part of a nodal slide set-up (paired it with the 200mm Desmond rail - BH #DEDLR2002). The clamp is very well made, robust and much less expensive than the offerings from some competitors.

5
28/05/2024

I ordered this to use with the sunwayfoto double dovetail rail as a nodal rail - works very smoothly and is well made

5
27/04/2024

I plugged the unit into my 2023 Honda Accord and navigated from Elgin, SC to Hendersonville, NC as directed by the “53” as directed and knew where I was all during the trip. It showed my location, speed and direction of travel. A great little basic navigation system.

5
17/04/2024

I bought this product to build a panoramic nodal slide, in combination with a 12 inch rail, and they serves my need pretty well. Before buying this product I did an extensive research on the nodal slide for panoramic photo. What I have determined is that the nodal slide has some limitations: (1) The clamp is fixed to the slide, so you can't change the direction of the clamp. (2) You can't adjust the distance frome the clamp to the front end of the slide. This was very important to me as I wanted to use one slide with all of my lenses including the WA ones. Besides, this combination (rail + bidirectional clamp) is much cheaper than a nodal slide. I can see that this product is very solid and precise.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Aten Vm7904 4-port 4k Displayport Input Board

$4,468.50 $6,255.90

Skb Audio Video Shelf

$314.97 $494.50

Aten Vs0201 2-port Vga Switch With Audio

$197.85 $316.56

Products You May Like

Korg Ma-2 Digital Metronome (blue)

$50.97 $68.30

Htc Vive Focus Plus Enterprise Vr Headset

$1,887.00 $2,604.06

Apc Bvk Series 1200va Ups Battery Backup

$449.97 $701.95

Nisha Rainbow Center Spot Filter (49mm)

$35.85 $43.38

Godox Tl60 Ac Power Adapter

$78.75 $113.40

Hp Ce247a Color Laserjet 220v Fuser Kit

$675.57 $891.75