The WindTech 300 Series microphone windscreen is designed to fit any microphone measuring 1-3/8" (41.275mm) in diameter. The windscreen offers optimum wind diffusion and will fit select AKG, Audio-Technica, Audix, Beyerdynamic, Telex, Sennheiser and Crown Models. Color: Light Grey .

1-3/8" Inside Diameter    Made in USA

Related Questions and Answers

Q: 1. Is the ink waterproof or water-resistant?

A: The Canon PFI-300 Ten Color Ink Tank Pack is pigment based ink and when used with weather resistant media will offer some weather of weather resistance.

Q: 2. What is the shelf-life unopened?

A: Unopened ink should last 2 years if stored in a cool dark, and safe space.

Q: 3. Are all 10 inks archival? If not, under favorable conditions, how long are they designed to last?

A: The inks in the Canon PFI-300 Ten Color Ink Tank Pack are all pigment based archival inks. The prints can last between 100 and 300 years depending on the type of paper and storage conditions.

Q: 4. How many lux at 3'3"?

A: The FotodioX Warrior 300 offers the following lux at 1 meter. 11,800 lux/1m (Bare Lens) 37,300 lux/1m (Standard Reflector)

Q: 5. Is this actually a light grey, or is it the color of blueboard (which is a greyish blue)?

A: It is light gray.

Q: 6. Fishman V-300 Concert Series Violin Pickup. does it need balanced or unbalanced cables to go to a recorder? no product info here at all.

A: The Fishman V-300 features a high impedance, instrument level, unbalanced female 1/4 output connector. A good cable to use would be the Kopul Studio Elite 4000B Series 1/4 Male to 1/4 Male Instrument Cable with Braided Mesh Jacket; B&H# KOI4010B.

Q: 7. Does anyone have any specific battery run times?

A: This lamp head draws 300 watts. You can use two of the GVM V-Mount Battery with D-Tap and DC Outputs BV-160, BH # GVBV160, which would be 160 Wh each. The estimated run time would be a little over an hour at full output. https://bhpho.to/3y4lZdY

Q: 8. Are there region coding for the Pro 300 ink cartridges?

A: Yes, the ink cartridges would have a region coded chip.

Q: 9. What is the amount of ink used when replacing an empty ink tank?

A: When you use the Canon imagePROGRAF PRO-300 printer for the first time after you install the bundled ink tanks, the printer consumes a small amount of ink in the amount to enable printing by filling the nozzles of the Print Head with ink. For this reason, the number of sheets that can be printed with the first ink tanks is fewer than the succeeding ink tanks, which would not subsequently require filling the print heads. The printing costs described in the brochures or websites are based on the consumption data from not the first ink tank /ink cartridge but the succeeding ink tank /ink cartridge. Ink is sometimes used to maintain the optimal printing quality as well.

Q: 10. is this dye based ink? Or pigment?

A: The ink would be Pigment based for both the colored inks and as well as the black inks.