You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Xtender Film At 11 Kit (200 Series)

Xtender Film At 11 Kit (200 Series)
  • Product Code: ga70336
  • Availability: In Stock

$741.00 $1,029.99

The Xtender CSM-20 Shoe / Microphone Mount connects the Xtender articulating arm to your camera's shoe mount. With the mount, you can fit in a 5/8" threaded mic clip to connect a microphone directly to your camera or connect the Xtender articulating arm to the camera by coupling it with a CSR-10 shoe receiver. It also converts the shoe of your camera to a 1/4-20" threaded mount.

Key Specs
Top Mount1x 1/4"-20 Female Thread
Bottom Mount1x Accessory Foot
Mounting
Top Mount1x 1/4"-20 Female Thread
Bottom Mount1x Accessory Foot
Packaging Info
Package Weight0.05 lb
Box Dimensions (LxWxH)3 x 2 x 0.75"

Connects the Xtender articulating arm to your camera's shoe mount

Allows you to fit in a 5/8" threaded mic clip to connect a microphone directly to the camera or connect an Xtender articulating arm to the camera by coupling it with the CSR-10 shoe receiver

Converts the shoe of your camera to a 1/4-20" threaded mount

Related Questions and Answers

Q: 1. Are the batteries included in the Kit.? If not what type of AA batteries.?

A: Unfortunately, AA batteries are not included with this kit. The Watson Rapid Charger with 4 AA NiMH Rechargeable Batteries (2500mAh), BH # WANMCK25. http://bhpho.to/3phURU9

Q: 2. what developer yields best results for this film? best results in terms of higher contrast, sharper image, infrared accuracy

A: I used Kodak D76

Q: 3. how many exposures on this roll? Is it the same as the cotton candy roll, and aiming for 24 exposures?

A: The dubble film Pacific 200 Color Negative Film (120 Roll) is medium format film. As such, it will depend on the medium format camera (or camera back) you are using on how many exposures you will get on a roll. It also depends on how the film is loaded. If you have a 6x4.5 camera, you will get approximately 15 or 16 frames on a roll. If you have a 6x6 camera, you will get approximately 12 frames on a roll. If you have a 6x7 camera, you will get approximately 10 frames on a roll. If you have a 6x8 camera, you will get approximately 9 frames on a roll. If you have a 6x9 camera, you will get approximately 8 frames on a roll. Finally, if you have a 6x10 camera, you will get approximately 7 frames on a roll.

Q: 4. Is everyone using this at the standard ISO or are you pushing or pulling it? Is so what are the effects?

A: Ilford SFX 200 Black and White Negative Film (120 Roll Film) can be push-processed to ISO 400 or ISO 800. Ilford suggest using ILFOTEC DD-X or MICROPHEN (stock) developer when push-processing.

Q: 5. Does it have Bluetooth to transfer pictures to phone?

A: The FUJIFILM INSTAX MINI 11 Instant Film Camera (Lilac Purple)is a film camera. It does not capture a digital file and does not have Bluetooth.

Q: 6. how do you charge the Genuine HP OfficeJet 200 series Battery CZ993-60017?

A: The HP OfficeJet 200 Series Battery BH #HEOJMPSB can only be charged when installed inside the printer.

Q: 7. Will this fit and work with the Officejet 250 mobile printer?

A: Yes, the HP OfficeJet 200 Series Battery BH #HEOJMPSB is compatible with the HP OfficeJet 250 Mobile All-in-One Inkjet Printer BH #HEOJ250.

Q: 8. what is in the bundle? I have seen other bundles that include camera, case, batteries and film

A: In the Box: FUJIFILM INSTAX Mini 11 Instant Film Camera Bundle (Sky Blue) FUJIFILM INSTAX Mini 11 Instant Film Camera (Sky Blue) INSTAX Mini Instant Film (10 Exposures) INSTAX Photo Holder Clip Stand INSTAX DIY Idea Booklet

Q: 9. Can I use this with the : (SmallRig Mini Side Handle with NATO Clamp Mount) ?

A: Yes, the Xtender Dual Tightening 1/4"-20 Monitor/Light Attachment can have one 1/4"-20 male end screw into the 1/4"-20 female thread on the SmallRig Mini Side Handle with NATO Clamp Mount.

Q: 10. What's the functional difference between the 0.3mm and 0.8mm versions? I'll be using this on a 600w Elinchrom strobe.

A: The thicker one is sort of like card stock. The thin one is like a sheet of paper. One is better when you need a slightly more rigid filter, the other is preferred when you need it to be more flexible.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Tilta Micro Articulating Arm

$57.00 $79.23

Winsted W6493 Two Articulating Lcd Pole Mounts

$1,931.73 $2,627.15

Camvate 3-way Cold Shoe Mount

$26.70 $34.71

Products You May Like

Schneider 6.6 X 6.6" 4mm Pink True-streak Filter

$1,512.00 $1,995.84

Hp 826a Magenta Laserjet Toner Cartridge

$1,967.97 $2,578.04

Benro Bv6h Video Head With Carbon Fiber Legs Kit

$2,778.48 $3,667.59

Tiffen 62mm Linear Polarizer Filter

$90.00 $135.90