The Revolvr Dual-Sided Lightweight Follow Focus Kit from Bright Tangerine is a high performance follow focus kit that connects you to the lens giving you focus with drive efficiency and direct transmission. The kit includes the 15mm LWS Bridge, two Handwheels, a Cine Arm, two Gears, five Marking Discs, a Hard Stop Pack, and an Extension, and a 4D Speedcrank.

Designed to allow you more options of placement: The follow focus is slimmer and has a dual mountable arm, allowing you more space for other accessories

Comfort at your fingertips: The conical handle matches the contours of your hand, even when the camera is hard to reach and you can use it on either side too

Removable hard stops move independently, and you can use either one or both

The clamps and locks can be used when wearing gloves

Standard cine ratio gears gives you the flexibility to work with stills lenses

Active-expanding coupling to connect the whip and speed crank for zero backlash

The speed crank is adjustable in length and can pivot from 90 to 130 degrees

Direct drive gives you better access

Both the whip and speed crank can attach without the handle

Made in Germany

Related Questions and Answers

Q: 1. this product have all this stuff? 1x Snap-on 15mm to 19mm rods adapter 3x Swing Arms (1:1.0/1:1.5/1:2.0 ratio) 2x Focus Knob/ Handwheel 1x Extension for Focus Knob 5x Module gears (0.8/64T, 0.8/38T, 0.8/43T, 0.6/64T, 0.5/78T) 1x 12 (300mm) Follow Focus Flexible Whip 1x Follow Focus Speed Crank handle 5x Marking discs 1x Hard Carrying Air Tight Safety Case ? or how much cost whit all stuff

A: The Tilta Single-Sided Cinema Follow Focus from ikan is compatible with 15mm and 19mm rod systems. In the Box:1x Focus Knob, not 2x (It wouldn't be Single Side with 2x)1x 15mm to 19mm rods adapter1x Whip1x Crank 4x Marking discs, not 5x3x Gears 1x Swing Arm, not 3xNo Extension, No Case.

Q: 2. What's the difference between the V1 and V2?

A: The Tilta FF-T04-V2 Dual-Sided Follow Focus Kit is an updated design from the Tilta FF-T04 Film Dual Follow Focus (B&H # TIFFT04), which works the same with some elevated features. The Tilta FF-T04-V2's focus knobs accept ARRI standard accessories, so whips and cranks can be attached at either side. The unit itself has a swing arm design for easy gear placement.

Q: 3. does it come with a case or does one need to be purchased?

A: hello The case is not included and can be purchased separately

Q: 4. Does it have a reversible gear mechanism to use with Nikon lens ?

A: Hello again, Nicolas. After some contemplation and a second cup of coffee, it occurred to me that, for just this follow focus, if you flip the whole thing around it will effectively reverse the drive direction of both wheels. Since this follow focus has 2, and not just one, you will be able to control it from whichever side is comfortable to you, in the direction you prefer. You'll just have to remember which setup you use for your Canon lens and which you use for your Nikon.

Q: 5. How do I assemble the hard stop screw?

A: On the Bright Tangerine Soft / Hard Stop for Revolvr and Revolvr Atom Handwheels there is a stainless steel plunger that can be activated for a hard stop. The stop screw screws into the rim of the Bright Tangerine Revolvr or Revolvr Atom Handwheel.

Q: 6. Does this have a foam cut out to hold things in place?

A: Yes, there is a foam cut out to hold the Dual-Sided Cine Follow Focus.

Q: 7. this product have all accessories: 1x Snap-on 15mm to 19mm rods adapter 3x Swing Arms (1:1.0/1:1.5/1:2.0 ratio) 2x Focus Knob/ Handwheel 1x Extension for Focus Knob 5x Module gears (0.8/64T, 0.8/38T, 0.8/43T, 0.6/64T, 0.5/78T) 1x 12 (300mm) Follow Focus Flexible Whip 1x Follow Focus Speed Crank handle 5x Marking discs 1x Hard Carrying Air Tight Safety Case ?

A: The ikan Tilta FF-T04 Film Dual Follow Focus comes with these items in the box: 2 x Hand WheelsHand Wheel Extension4 x Marking Disks5 x Drive Gears15mm LWS Support Rod AdapterWhipCrankSafety CaseLimited 1-Year Warranty So no 3x Swing Arms, and 4, not 5 Marking discs.

Q: 8. How is the Revolvr Atom Cine kit different from the the Revolvr Atom Mini Kit? What's the main difference or part?

A: I believe the gearing ratios are 1:1.8 on the cine and 1:1 on the mini. The cine version is designed for cine lenses with long focus throws.

Q: 9. is it compatible with canon t7i?

A: Some elements of the SHAPE Lightweight Matte Box & Follow Focus Kit for Canon EOS R5 C, R5 & R6 would work with the Canon EOS Rebel T7i DSLR Camera, such as the matte box and the follow focus, you could probably mount the camera inside the cage as well, but it wouldn't fit supper well, as the Rebel T7i is a good bit smaller than the cameras that his rig is intended for.

Q: 10. Can the wheel be reversed for Nikon lenses ?

A: Yes, this is reversible.