The RPMA282 RPA Elite Custom Projector Mount with Keyed Locking from Chief is compatible with the Acer X1130, X1230, and the X1230S.. The mount features Microzone Adjustment technology, allowing for fast and precise projector registration, and independent roll pitch and yaw. It is also able to maintain the registration and the preset adjustments when disconnected. There is a Q-Lock Quick Release Lever which enables you to easily connect/disconnect your projector for convenient access to the lamp and filter, and an integrated key and lock system for additional security. Built-in Centris technology creates effortless fingertip positioning, and self-adjusts to support different projector weights. An opening at the top of the mount provides cable management, making additional cable accessories unnecessary. To protect against theft, there is All-Points Security steel-into-steel locking hardware at all of the important connection points.

Microzone Adjustments make projector registration fast and precise

Centris Technology enables effortless fingertip positioning, and self-adjusts to support different projector weights

Quick connect/disconnect for convenient lamp and filter access on most projectors

Maintains registration and preset adjustments when disconnected

Cable management without additional accessories

Q-Lock Quick Release Lever and integrated key and lock system provides additional security

All-Points Security steel-into-steel locking hardware

Related Questions and Answers

Q: 1. Can I vertically mount a projector using the 90 degree tilt and have the projected image point downwards? (e.g. lens pointing towards the ground)

A: Using the 90° Tilt will shoot the image to an adjacent wall and not to the floor.

Q: 2. How long is cable?

A: The cable of this Kensington MicroSaver 2.0 Keyed Twin Laptop Lock (Master) is 8 ft.

Q: 3. Does it actually hold well at a 90 degree angle or will it require constant re-adjustment?

A: If the projector isn't near the upper limit of its load capacity it shouldn't be an issue.

Q: 4. What is the correct part number for the ceiling extension down rod? The one listed in Qs is wrong.

A: 1.5" NPT threaded pipe or equivalent will do: Chief CMS-009012W 9-12" Speed-Connect Adjustable Extension Column (White) BH #CHCMS009012W Chief 5" Designer Ceiling Plate with 1-1/2" NPT Opening (White) B&H # CHCMA101W

Q: 5. Will this work with the Epson Home Cinema 2100?

A: Yes it is compatible with the Epson Home Cinema 2100 projector.

Q: 6. does this fit the epson 6050?

A: Epson does not recommend that mount for the 6050. This is a good option: http://bit.ly/6050compatible

Q: 7. KUPO's website gives conflicting capacities for this mount. "Up to 33lbs" & "Maximum Payload Capacity: 15lb" Which is correct?

A: The Kupo website has a typo for the load capacity specification of the Kupo Universal Projector Mount (B&H # KUKD303112). It should read 15 kg instead of 15 lb. 15 kg equals 33 lb.

Q: 8. How is the slider mounted to a stand?

A: The MOVMAX Slider Elite with 100mm Bowl Mount (47.2") includes two light stand adapters with 5/8" receivers, allowing it to easily be mounted to stands like the Impact Turtle Base C-Stand (10.75', Chrome), BH #IMLSCT40M, which has a 5/8" stud on top of the stand.

Q: 9. Will this work with the Kensington locking slot on the 27” iMac 2019?

A: Yes, this model is compatible with a standard Kensington locking slot.

Q: 10. Does the extender come with the TFH mount or is it additional ?

A: As you can see from this photo on our website this Extender Product is the Tilts itself. It is the Tilt Flash Mount. You would just need to connect your flash through its shoe. https://bit.ly/2WPGqsz