The Countryman Isomax Headset Microphone is the original Countryman head-worn microphone, and a favorite for both speech and performances. The Isomax features a flexible boom for easy positioning, and the sensitive capsule features a wide 20 Hz to 20 kHz frequency response for full, clear audio reproduction.

The Isomax effectively rejects off-axis audio, minimizing feedback and residual noise. The flexible, adjustable band fits snugly and comfortably around the back of the head for concealed use on stage, during trade shows, speeches, sermons, etc.

A wide variety of colors and connecttors are available for use with various wireless transmitters. This version is beige and features a 4-Pin Hirose connector for use with *specific Audio-Technica transmitters.

For Audio-Technica Wireless Transmitters    Hypercardioid Polar Pattern    4-Pin Hirose Connector    For Audio-Technica Wireless System    Telescoping Boom Provides a Custom Fit    20 Hz to 20 kHz Frequency Response    High Rejection of Feedback    Beige

A miniature hypercardioid capsule is mounted to a low-profile, adjustable headband. The Isomax is available in a variety of colors that match different skin tones, so you can select the version that is appropriate for your application.

The moisture-resistant capsule is protected against humidity, sweat, and makeup.

The Isomax is available in omnidirectional, cardioid, and hypercardioid polar patterns. This version features a hypercardioid pattern for high rejection of off-axis noise and feedback sources.

Related Questions and Answers

Q: 1. Will this work on an atw-t31?

A: The AT829cW is compatible with the connector on T-31 transmitter and all other UniPak' transmitters from Audio Technica.

Q: 2. Does this mic require phantom power?

A: It is not a dynamic mic. It is an electret condensor needs a small voltage. When used with a wireless transmitter they provide the small electrical booster needed to power the mic. If you want to use it with a mixer that has xlr jacks you need to turn in phantom power and use an adapter such as the Ride VXLR Pro that can take in 48v phantom power from the mixer and deliver the smaller voltage needed by the mic.

Q: 3. Can the hypercardioid version of this mic be connected directly to a 3.5mm TRS connection? It'll be recorded through a USB audio adapter straight to a computer.

A: This microphone is designed for use with a wireless transmitter and requires 15V to operate, a comuter will NOT provide this voltage. Power Requirements 15 V at the microphone under load 4 mA total current drain Models are available for Phantom power and most wireless transmitters

Q: 4. What bodypack systems is the 3.5 mm ts compatible with?

A: The Pyle Pro PMHM2 Omnidirectional Headset Microphone can be used with any wireless bodypack transmitter that has a standard non-locking 3.5mm mic input such as the RODE Wireless GO II Compact Digital Wireless Microphone System/Recorder, the DJI Mic Compact Digital Wireless Microphone System/Recorder, the Saramonic Blink 500 Digital Camera-Mount Wireless Microphone System, and the Synco WAir Ultracompact Digital Wireless Microphone System, to name just a few. The PMHM2 can also be used with other devices that have a 3.5mm mic input including audio recorders, tablets, and computers.

Q: 5. Does this PMHM2 works with PDWM8900 or similar system?

A: Yes the Pyle Pro PMHM2 will work with the Pyle Pro PDWM8900. They both have 3.5mm and connectors.

Q: 6. Will this work with a Shure bodypack?

A: This model is only compatible with Line 6 transmitters. For compatibility with Shure transmitters, you want to use B&H # COH7BSL instead.

Q: 7. Why I hear only blowing and breathing but no speech? It doesn't make any other sound.

A: I see that Point Source Audio's technical support team has already received your request for assistance and will be contacting you directly. If you do need to reach Point Source Audio by phone their number is 415-226-1122. Please let us know if you require further assistance.

Q: 8. Are there electronics built in that take 48v to 15v phantom power? I'd be using with a Tascam X8.

A: To use the Countryman Isomax Headset Microphone with 3-pin XLR Connector (Beige) with the TASCAM Portacapture X8 32-Bit Float 8-Channel Multitrack Field Recorder, a 12V to 48V in-line transformer is required. The PSC A4812 48V to 12T In-Line Barrel Adapter is the recommended device for this application.

Q: 9. does this world with video camera?

A: This will work with a professional video camera that has XLR inputs and a 48 volt power supply, although such a setup is very uncommon.For this kind of use, lavalier mics are usually preferred as they look more discreet.

Q: 10. Is this a single ear or double ear headset?

A: Countryman ISOMAX Headsets feature a dual ear headband.