Featuring a bright 12" display and rugged carbon fiber construction, the HHT3 Handheld Receiver Kit from Vislink is a lightweight and portable solution for receiving, monitoring, and outputting wireless video transmission signals from UAV-mounted cameras and other wireless systems, such as HEROCast-equipped GoPro cameras. Included in this kit is a case for storing and transporting the receiver, and an Anton Bauer battery mount for powering the unit using a Gold Mount battery.

Using active signal diversity, the receiver accepts signals from two antennas to enhance demodulated performance and increase operating range. It operates on the 2.0 to 2.5 GHz frequency bands and supports resolutions up to 1080i at 25/29.97 fps and 720p at 50/59.94 fps. Video can be decoded as MPEG-2 or H.264/MPEG-4.

The bottom of the receiver features a comprehensive connector panel which includes HD-SDI, HDMI, composite video, and component video outputs. There is also an analog audio output, user data channel output, and an Ethernet port for control via a web browser interface. On-board control and monitoring is available via the built-in display and front panel buttons. Built-in speakers enable on-board audio monitoring.

2.0 to 2.5 GHz Frequency Bands    Supports 1080i and 720p Video    Dual Antennas    H.264/MPEG-4 and MPEG-2 Video Decoding    Built-in 12" LCD Screen    HDMI, HD-SDI, and Analog Video Outputs    Analog Audio Output    Control via Buttons and Ethernet    Gold Mount Battery Plate    Lightweight Carbon Fiber Construction

• Operates on 2.0 to 2.5 GHz frequency bands
• Compatible with HEROCast and HEROCast BacPac
• Supports 1080i and 720p resolutions at 50/59.94 fps
• H.264/MPEG-4 and MPEG-2 video decoding
• DVB-T COFDM modulation
• Dual antennas
• Built-in 12" LED-backlit LCD screen for monitoring
• HDMI, HD-SDI, and composite/component video outputs
• Control via front panel buttons and over Ethernet
• Summary front panel alarm and comprehensive internal lock alarms
• User data channel output
• Built-in two-channel speakers
• Lightweight and rugged carbon fiber construction

Related Questions and Answers

Q: 1. Does this base kit slide back and forth to allow proper fitting on shoulder if longer lens is attached?

A: Yes, The base plate included in the Movcam Base Kit for Sony FX9 (V-Mount) will allow you to re-position the Arri style Dovetail plate to your requirements.

Q: 2. Will this help get the bounce step out of the footage without having to walk like a ninja?

A: Yes, the Tilta Float comes with a Stabilizer Arm to smooth out all types of camera movement.

Q: 3. If I feed HDMI to transmitter. Will I be able to get converted video signal from SDI out on transmitter to feed to my monitor?

A: Yes, the Vaxis Storm 1000S Wireless Kit (V-Mount) will cross-convert from the HDMI to SDI.

Q: 4. does the it lower the image quality when it being transmitted?

A: No, the image quality will not be affected when using the Teradek Bolt 6 LT 750 3G-SDI/HDMI Transmitter/Receiver Kit for wireless transmission.

Q: 5. hello, is this unit compatible with the teradek bolt 4k 750 lt? I bought one a few days ago and it is impossible for me to pair them. Thank you

A: Yes, You can pair the Bolt 750 4k with the new Teradek Bolt 6 LT 750 RX Please review How to pair- https://bit.ly/3TucPBl Also - Before starting either pairing process, ensure that both the transmitter and receiver have the same firmware version (the latest Firmware version for Bolt 6 and Bolt 4K is v4.3.1, and may be downloaded here), region setting, and have Bluetooth enabled (only if using the Bolt App).

Q: 6. Will the TX work with a Bolt Receiver?

A: No. The following units run off of two different protocol systems.

Q: 7. Can this monitor be powered off a Tiffen M2 Steadicam sled since it has a lemo? Anybody do that? Thanks.

A: The Steadicam M2 Top stage uses 3-pin LEMO connectors for accessory power and the SmallHD ULTRA 5 Bright Touchscreen Monitor uses 2-pin LEMO for power input, so the Steadicam M2 cannot be used to power the monitor.

Q: 8. Does the transmitter support internal HDMI to SDI conversion?

A: Yes, the Vaxis Storm 1000S Wireless Kit (V-Mount) transmitter supports HDMI to SDI/SDI to HDMI cross-conversion.

Q: 9. Are the mounting screws included?

A: Yes, screws are included of various sizes.

Q: 10. If I connected the transmitter to a video switch (e.g., ATEM Mini Extreme's HDMI-out port) could I connect the receiver to a projector (Epson LS500) and play compatible videos with sound?

A: Yes, Teradek Bolt 6 LT HDMI 750 Transmitter/Receiver Kit would be able to provide a latency free wireless HDMI connection between the Black Magic Atem Mini Extreme and an HDMI onput projector like the Epson LS500.