You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Evertz Microsystems X-series 12x2 Hd/sd Sdi Video Router With Bypass Relay & Softswitch Capability

Evertz Microsystems X-series 12x2 Hd/sd Sdi Video Router With Bypass Relay & Softswitch Capability
  • Product Code: ga70893
  • Availability: In Stock

$34,185.00 $50,935.65

The X-Series 12x2 Video Router from Evertz Microsystems supports SMPTE 424M (3 GB/s), SMPTE 292-1 (1.5 GB/s), SMPTE 259 (270, 360, or 540 MB/s), and DVB-ASI video signals. It features the ability for redundancy protection with a bypass relay and optional dual power supplies. The router comes equipped with an embedded SoftSwitch for all four audio groups. The embedded audio on the two video busses uses SoftSwitch technology to eliminate audible pops when switches are performed for SD, HD, or 3G videos. Housed in a 1 RU rackmount frame, the unit can be used with a rackmount remote control panel (available separately) that replaces the built-in control panel. The unit can also be controlled by Quartz over Ethernet, contact closures on the GPI control port, or through the RS-232 or RS-422 serial remote control port using industry-standard switcher protocols.

Video Input
StandardSMPTE ST 424-1 (3 GB/s), SMPTE ST 292-1 (1.5 GB/s), SMPTE ST 259 (270, 360, or 540 MB/s), and DVB-ASI
Number of Inputs12
Connector TypeBNC per IEC 61169-8 Annex A
EqualizationAutomatic:
Up to 492.1' (150 m) at 3G, 902.2' (275 m) at HD, 1558.4' (475 m) at SD

With Bypass Output:
377.3' (115 m) at 3G, 656.2' (200 m) at HD, 1476.4' (450 m) at SD
Input RangeMeasured with respect to the Genlock reference
±1/2 line when Coarse phase = 1, Fine phase = 0
Video Output
StandardSMPTE ST 424-1 (3 GB/s), SMPTE ST 292-1 (1.5 GB/s), SMPTE ST 259 (270, 360, or 540 MB/s), and DVB-ASI
Number of Outputs2 per buss, 2 busses; Inputs 1 and 12 bypass protected
Connector TypeBNC per IEC 61169-8 Annex A
Signal Level800 mV nominal
DC Offset±0.5 V
PhaseMeasured with respect to the Genlock reference
Adjustable 1 line to a full frame of delay – set by Coarse phase parameter. The active video content will align to the nearest line
Video Reference
TypeMenu selectable – depends on video format
Connectors2 x BNC per IEC 61169-8 Annex A
TerminationHigh impedance loop through
GPI Control Port
Number of Inputs14 opto-isolated, programmable functions
Number of Outputs4 sets of relay contacts, normally closed, programmable functions
Relay RatingMaximum: 1 A at 30 VDC
Control Port
ProtocolRemote control panel
StandardRS-422
Baud Rate9600
Connector9-pin female "D"
Serial Interface
ProtocolGVG Ten XL Protocol, master, slave or quartz router protocol
StandardRS-232 or RS-422
Baud RateProgrammable
Connector9-pin female "D"
Ethernet
ConnectorRJ45
ProtocolQuartz router protocol, SNMP
Electrical
PowerAuto ranging 100 to 240 VAC, 50/60 Hz 40 W
Fuse250 V, 1 A time delay
Physical
Dimensions1.75 x 19 x 7.75" (45 x 483 x 196 mm)
Weight8 lb (3.5 kg)

Supports SMPTE ST 424M (3 GB/s), SMPTE ST 292-1 (1.5 GB/s), SMPTE ST 259 (270, 360, or 540 MB/s), and DVB-ASI video signals

Bypass verification test using main menu

Programmable tally output bus

GVG TEN-XL protocol and Quartz protocol are supported

Embedded SoftSwitch provides clean video

Video and audio input relay bypass for power failure bypass protection

Optional dual power configuration

Remote control via SNMP

Comes with a blank front panel

Related Questions and Answers

Q: 1. have you got multiviewer with analog audio input , and analog video input with other features of MI 16?

A: This is the closest we match we can offer : Gra-Vue VIO MVS-16HD-D 1U Multiviewer B&H # GRVIOMVS16HD

Q: 2. can you put arri amira lut rec 709 on this monitor with some usb or smth?

A: Not that we are aware of. This monitor does not list Customer LUT Support.

Q: 3. Do the SDI and HDMI outputs operate simultaneously? I want to bring HDMI out of a video codec and send it to a LCD monitor but also loop back in to a Tricaster for easier viewing when in the Tricaster application. HDMI IN SDI OUT to Tricaster AND HDMI out to LCD basically.

A: The HDMI and SDI outputs will both be active on the DAC-70. You will be able to convert HDMI to SDI and also use the HDMI output.

Q: 4. Can you play full videos from any of the media store and control them from the mixer surface?

A: The Media-Store of the Ross Video Carbonite Black Solo 1 M/E Live Production Video Switcher can be used with pre-stored graphics and animations, it is not designed for full videos.

Q: 5. what is the weight of this product?

A: less than a pound. Great box to have..

Q: 6. Does the power supply come included with this unit?

A: Yes, the power supply is included with this product.

Q: 7. does it embeds RCA Audio Input onto HDMI Output (just like what DAC-8P does, if we want to chose audio from RCA instead of HD-SDI)? please refer here a href= http://www.bhphotovideo.com/c/product/867307-REG/Datavideo_dac8p_HD_SD_SDI_T_HDMI_Converter_Up.html target= _blank http://www.bhphotovideo.com/c/product/867307-REG/Datavideo_dac8p_HD_SD_SDI_T_HDMI_Converter_Up.html/a

A: Using the analog audio input it will embed audio onto the HDMI output.

Q: 8. Will the 5-pin xlr work for comm as well as tally?

A: Yes it will. The 5-pin XLR is for both Talkback and Tally.

Q: 9. Why is this converter box not compatible with the Sony HDR-FX7 camera?

A: The specs for input is shown below, and it specifically says that the Sony HDR-FX7 will not work. It does not say why, but the Sony HDR-FX7 is 1440x1080 which may be the answer. 720 x 480 interlaced (NTSC) 720 x 576 interlaced (PAL) 1280 x 720 / 50Hz progressive 1280 x 720 / 59.94Hz progressive 1280 x 720 / 60Hz progressive 1920 x 1080 / 50Hz interlaced 1920 x 1080 / 59.94Hz interlaced 1920 x 1080 / 60Hz interlaced 1920 x 1080pConnections Input: HDMI Output: 2x BNC connectors for HD/SD-SDI Audio: HDMI audio is embedded into the SDI output. Note: The DAC-9P is not compatible with the HDMI output from the Sony HDR-FX7 camera. The DAC-9P is compatible with other Sony cameras. The Sony HVR-V1 and the Sony HVR-HD1000U have been tested and are compatible with the DAC-9P.

Q: 10. will this unit convert 1080p 24 to 1080p or i 50 ?

A: You bet it will.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Godox Knowled P300r Rgb Led Light Panel

$5,097.00 $7,390.65

Kiloview Linkdeck Control Panel

$8,895.00 $14,054.10

Muxlab 5" Touch Control Panel With Poe (white)

$2,393.85 $3,351.39

For.a Fa-10ru Remote Control Unit

$8,100.00 $10,044.00

Elation Professional Kl Panel 6-in-1 Led Light

$5,099.97 $7,190.96

Kino Flo Freestyle 21 Led Panel

$4,500.75 $5,400.90

Rdl Ez-hk2 Composite Video Hum Killer

$393.93 $571.20

Rgblink Dvi Pvw Module For Q16pro

$6,000.00 $9,300.00

Aputure Nova P600c Rgb Led Light Panel

$6,594.00 $10,154.76

Products You May Like

Heliopan Nd Filter (bay 60, 1-stop)

$547.50 $684.38

Tiffen Black Fog Filter (4 X 4", Grade 1)

$738.00 $1,151.28