The BlueFox3 USB3 Vision Camera from MATRIX VISION is an area scan machine vision camera for inspecting products on assembly lines, gauging and measuring quality, inspecting defects, label inspection on bottles, and more. It allows you to get a physical image of a product onto the computer in two-dimensional space and measure accuracy/inaccuracy by counting the number of pixels. Featuring a C-mount lens mount, the BlueFox3 supports any C-mount lens, including a wide range of MATRIX VISION telecentric lenses. MATRIX VISION is part of the AIA Machine Vision Trade Association.

This version of the camera features a 2.4MP, 1/1.2" sensor, 41 Hz frame rate, on-board color processing, and a 12-pin I/O connector on the back for power input, trigger input, and trigger output. (An optional Hirose cable, such as model # RTKS-BCX-HR12-05.0, is required for the I/O connection). The camera captures images at a resolution of 1936 x 1216 but also allows for area of interest selection, as well as binning, and decimation via software.

The camera has large RAM and FPGA (field-programmable) integrated boards that provide for reliable processing and customization. The FPGA board reduces the CPU load and allows for more functions to be added. The camera also has a fully GenICam compliant mvIMPACT SDK that enables even more flexibility -- complete documentation of the SDK gives you access to many special camera features that could simplify your vision system development. The camera's driver is also compatible with a wide range of 3rd-party software, including those from Halcon, Matlab, and Labview.

Area Scan Machine Vision Camera    2.4MP 1/1.2" Sensor, Global Shutter    Up to 1936 x 1216 Resolution    5.86μm Pixel Size    41 Hz Frame Rate    On-Board Color Processing    12-Pin Hirose I/O Connector    GenICam Compliant mvIMPACT SDK    Member of AIA Machine Vision Association

Area scan machine vision camera

2.4MP, 1/1.2" Sony Pregius IMX249 CMOS sensor with a global shutter

1936 x 1216 resolution (with area of interest selection, binning, and decimation)

5.86μm pixel size

41 Hz frame rate

On-board color processing

12-pin I/O connector for power input, trigger input, and trigger output

C-mount lens mount

USB 3.0 interface

Large RAM and FPGA boards

GenICam compliant mvIMPACT SDK

Driver is compatible with many 3rd-party software

Counter and timers

Sequence recording using parameter sets

Event notifications

Support for additional information via data streams

Integrated IR cut filter

Member of AIA Machine Vision Trade Association

TC2MHR, TC4MHR, TCCR2M, TCCR4M, TCDP Plus, TCCX2M, MZMT, EN2M, ENUV2M, EN4K

Related Questions and Answers

Q: 1. Does this have loop recording?

A: The SJCAM A10 1296p Body Camera with Night Vision BH #SJA10 features loop recording: Loop Recording include four options--" Off, 3mins, 5mins, 10mins",select this option, the device will continuously record video segmentally until the memory card is full, and then cover the contents of the previous record.

Q: 2. What is the weight of the film package ?

A: The Kodak VISION Color Print Film 2383 (70mm, 2500' Roll) weighs approximately 27 lb.

Q: 3. Is there ONE 2000' on-core roll in the film can?

A: The Kodak VISION Color Print Film 3383 (16mm, 2000' Roll) is 2000' of 16mm on one core.

Q: 4. I have an A70 back for Hasselblad. Can i use this film with that back? is this C41 or E6 process film?

A: Unfortunately, as of the date/time of this reply, I have not been able to receive confirmation if the Kodak 2383 VISION Color Print Film Roll (70mm, 2000') would be compatible for use with the Hasselblad A70 back. If I receive a reply from Hasselblad, I will update this reply.

Q: 5. What is the process for this film in order to develope it?

A: Please click on the following link to view your options; https://www.kodak.com/US/en/motion/support/laboratories_directory/index.htm?blitz=off

Q: 6. Which Chemical Development Process is this film stock designed to use? (ie ECN-2, C-41, etc?)

A: You have several options to choose from for Kodak VISION 35mm Color Print 2383 Film: it is safe for processing in Standard C-41 Lab Processors or ECP-2D processing. The film can also be processed in standard black and white developers and fixers.

Q: 7. Will this work with an iphone 15 -- ie, the one with a USB-C connector?

A: The Xinfrared (formerly InfiRay) T3 Night Vision Thermal Imaging Camera (BH # XIT3) is designed for the Android mobile OS. It will not operate with iOS (Apple iPhones).

Q: 8. Hi B & H Does this item have the GPS and other options like accelerometer? I would like to purchase that particular model but you dont appear to sell it to Australia

A: Yes it does: Features: Color night vision camera with Daytime, Twilight, and Night modes Augmented Reality and Team Modes Support up to 256 GB microSD card IP67 rating: dustproof and water resistant to 3'3" Selectable GPS, accelerometer, and compass functions Capture video and stills in near-dark, moonless, and starlight conditions 1" type CMOS sensor with large pixels for low-light imaging Certified for weapons use 720p video and 0.9MP still photos Selectable f/5.6, 2.0, and 1.4 iris, to adjust to available light OLED EVF with diopter Live stream using the Aurora app and your iOS/Android smartphone Selectable frame rates of 7.5, 15, 24, 30, and 60 fps Shoot up to two hours on a single battery charge

Q: 9. I own a Zetronix 1080 Zshades, good quality but poor Image Stabilization. Does this bodycam have good IS?

A: The recordings are stable and reliable. We are not able to compare this camera to your current one.

Q: 10. how long does the battery last before needing to be recharged or swapped out for a fresh one?

A: The SJCAM A10 1296p Body Camera with Night Vision (BH # SJA10 ) will deliver 4-6 hours of use( (Wi-Fi and Screen Closed)) before needing a recharge.