With a 4x filter factor that reduces exposure by 2 stops, this 100 x 150mm NanoPro MC Hard Edge Graduated 0.6 Neutral Density Filter from Haida is designed to darken select portions of your image without affecting image sharpness or color reproduction. It features a hard edge in its center that starkly divides the clear section and the darkened section, making this filter ideal for photos with a sharp horizon such as seascapes and elevated urban landscapes.

The NanoPro MC is made of optical glass and features a 2mm thickness compatible with a wide range of holders. Both sides of the filter are treated with several layers of coating, resulting in minimized reflections and increased resistance to scratches. The multi-coated construction also makes it easier to clean water and other debris from the glass surface, suiting it for use in the outdoors.

4x Filter Factor, 2-Stop Grad ND Filter    Reduces Exposure in Selective Areas    Multi-Coated for Reduced Reflections    Scratch-Resistant and Waterproof    Designed for Neutral Color Performance    2mm Thick Optical Glass Material

• 100 x 150mm hard graduated 0.6 ND filter, with a line in the center dividing a clear zone from a 2-stop reduction
• 2mm thick optical glass multi-coated for better scratch resistance, minimal reflections, and easier cleaning
• Designed to keep images sharp while avoiding color casts

Related Questions and Answers

Q: 1. How do you instal and remove these filters?

A: To install the DJI Neutral Density Filter Set for Mavic 3, you will first need to remove the current UV filter of the camera. Hold the gimbal/camera in place and gently twist off the UV filter. Then apply the the ND filter and twist this accessory on.

Q: 2. Does the NiSi 77mm Variable ND 1.5 to 5 filter stop have a HARD STOP?

A: Yes, the NiSi 77mm Variable Neutral Density 0.45 to 1.5 Filter (1.5 to 5-Stop) has hard stops.

Q: 3. Does it have a hard stop at each side of the scale, so it won't rotate too much?

A: The Haida NanoPro Variable Neutral Density 1.2 to 2.7 Filter (77mm, 4 to 9-Stop) does not have a hard stop, but it's design allows for smooth transition between stops and stays in place.

Q: 4. Can this filter be used with the Nisi v7 filter holder?

A: Yes, the NiSi V7 Alpha 100mm Aluminum Filter Holder can be used with the Haida Red Diamond ND6.0 Filter (100 x 100mm, 20-Stop).

Q: 5. Is it a 0.45 to 1.5 or 1.5 to 5 filter?Are these two different versions?

A: For whatever reason, we are changing over the nomenclature delineating what strength an ND filter is. Therefore this name lists both. Old way: This is a variable 0.45-1.5 Neutral Density filter. New way: this reduces exposure by 1.5 to 5 Stops.

Q: 6. is the level detachable? If so, can I still use the lens hood on my rf 24-105mm without the level?

A: The lever is detachable but the filter ring is too large to be used inside the Canon hood. A screw on hood could be used instead such as this: https://bhpho.to/35j7SrF

Q: 7. Is this filter multi-coated?

A: Yes, the Haida 58mm NanoPro Magnetic Interchangeable Variable ND 2-Filter Kit would be multi-coated.

Q: 8. Will this fit in the 52mm filter holder slot for Nikon 200mm f2 or 200-400 f4 lenses?

A: The Urth 52mm ND64 1.8 Lens Filter Plus+ (6-Stop) may or may not fit the Nikkor 200mm f/2 or Nikkor 200-400mm f/4 lens, but the only filters guaranteed to fit are Nikon filters.

Q: 9. Would this filter work with Kase magnetic step-up rings? Kase does not make a 72mm light pollution filter.

A: Yes, you could use the Haida NanoPro Magnetic Clear Night Filter without Adapter Ring with a Kase Magnetic Step-Up Ring.

Q: 10. Are these compatible with the freewell magnetic filter system so I can stack or use with other filters or the freewell adapter ring?

A: No, the Haida NanoPro Magnetic Clear Night Filter without Adapter Ring (82mm) only works with the Haida system.