Red Digital Cinema Camera

Red Digital Cinema Dsmc2 Lemo Adapter A

Product Code: ga71026
Availability: In Stock

$750.00 $1,192.50

Qty

1 reviews Write a review

Description
Reviews (1)

This RED Digital Cinema DSMC2 LEMO Adapter A mounts to your RED BRAIN and creates a 16-pin LEMO port compatible with RED Touch and RED Pro Touch displays, as well as RED EVFs, so you can use your legacy viewfinder with your DSMC2 camera. It mounts securely to your camera with captive screws, and features two 1/4"-20 threaded accessory holes.

For DSMC2 Camera BRAIN Converts Pogo Connection on BRAIN Creates Legacy EVF/LCD 16-Pin LEMO Port 2 x 1/4"-20 Accessory Mounting Points

Parameters
Material of Construction	Aluminum alloy
Mounting	To BRAIN: 2 x M4 captive mounting screws Accessory: 2 x 1/4"-20 threaded mounting holes
Connections	BRAIN: 1 x DSMC2 LCD/EVF pogo connector (26-pin) LCD/EVF: 1 x 16-pin 1B LEMO socket
Firmware	Works with all DSMC2 firmware
Environmental	Operating Temperature: 32 to 104°F / 0 to 40°C Humidity: 0 to 85%, non-condensing Storage Temperature: -4 to 122°F / -20 to 50°C Humidity: 0 to 85%, non-condensing
Dimensions	1.02 x 4.41 x 1.10" / 2.59 x 11.2 x 2.79 cm
Weight	2.4 oz / 68 g
Packaging Info
Package Weight	0.2 lb
Box Dimensions (LxWxH)	4.7 x 2.8 x 0.7"

Enables mounting of RED Touch and Pro displays, and the RED BOMB EVF—both LCoS and OLED.

Using the DSMC2 LEMO Adapter A in conjunction with an optional DSMC2 LEMO Adapter B enables mounting the DSMC2 RED Touch 7" or 4.7" LCD off the camera, when used with an optional extension cable.

Related Questions and Answers

Q: 1. Does it cable work as a adapter for capturing audio with a 3.5mm External Mic's?

A: The RED DIGITAL CINEMA DSMC3 RED 5-Pin LEMO to 3.5mm Female Audio Adapter (11.3") is made to interface 3.5mm audio without the need for 48V phantom power.

Q: 2. Will this side handle work with the Dragon-X?

A: Yes it will. The Dragon-X is a DSMC2 camera.

Q: 3. can this be used as timecode input?

A: The RED DIGITAL CINEMA DSMC3 RED 5-Pin LEMO to 3.5mm Female Audio Adapter (11.3") can be used with a timecode device like the Deity Microphones TC-1 Wireless Timecode Generator Box (Bluetooth, 2.4 GHz) to accept LTC timecode from the 5-pin port on the camera bodies themselves.

Q: 4. Can you run line level audio into the 3.5mm stereo input or is it just a mic level connection?

A: RED describes the 3.5mm input as a Mic Input only. It does not list it as Line Level.

Q: 5. Can I install this over existing Komodo cage ribs or do I need to remove the ribs to install these?

A: The RED DIGITAL CINEMA KOMODO Wing Grip is designed to be mounted directly to the right side of the Komodo.

Q: 6. Will this handle work with the original Epic-W?

A: Yes it will

Q: 7. Just to be sure. If the Wing Grip mounts on both sides of Komodo, will it work fine with Komodo Outrigger Handle?

A: Yes, The RED DIGITAL CINEMA KOMODO Wing Grip can mount to either side of the Komodo. If you use the Outrigger handle you would not be able to install a wing grip where the outrigger handle is located. So you would only be able to use the KOMODO Wing Grip on one side when paired with the Outrigger handle.

Q: 8. Will this work on top of the camera to use easy rig

A: The RED DIGITAL CINEMA KOMODO Wing Grip is for side use only.

Q: 9. How much does this weigh?

A: Approximately 0.13 lbs (59 g)

Q: 10. Is this compatible with Red Helium 8K?

A: Because the RED Helium 8K is a RED DSMC2 camera, the RED DSMC2 V-LOCK I/O Expander is compatible with the Helium.