The 7" 4K HDMI On-Camera Monitor from Laizeske has an IPS panel with a 450 cd/m² brightness output and features a 1920 x 1200 resolution for viewing detailed high-definition content. It can display up to 16.7 million color images with no brightened dot and no streaking. The wide color gamut LCD panel ensures more precise color restoration. With 1/4" screw hole at the bottom and an included shoe mount adapter, this 7" monitor can be mounted on a DSLR camera. It can also be installed by the magic arm on Steadicam, DSLR rig, camcorder kit, handheld stabilizer, and a video camera crane. The DR737 monitor can be powered using an DC adapter or lithium batteries. It has a flexible battery system that supports F970 (standard), D28S, D54, and U60 battery plates.

You can use this quantitative tool to check picture brightness. It shows the distribution of brightness in an image as a graph of brightness along the horizontal axis, and a stack of the number of pixels at each level of brightness along the vertical axis.

The audio level meters provide numerical indicators and headroom levels, generating accurate audio level displays to prevent errors during monitoring. The audio meter is green initially but turns yellow and red when it exceeds -20 and -9 dB respectively.

When the peaking filter is activated, the internal processor displays a colored highlight on the screen where sharp edges appear. You can switch the outline color between red, green, and blue, depending on the different tone of the subject.

The false color filter helps set the camera exposure. As the camera iris is adjusted, elements of the image change color based on the brightness values.

Used to assist in exposure adjustment in the zebra pattern mode, it is considered overexposed and displays the moving warning lines onto the overexposed areas. It can be adjusted from 1 to 100 IRE.

Adjust camera color settings using the check field mode, using red, green, blue, or mono pixels to generate the image. Hue and saturation can be adjusted quickly and accurately in this environment.

Image magnification retains HD signal in any part, an amplification for high-quality close-up.

The built-in selection of no-squeeze, 1.3x, or 2.0x allows you to use anamorphic lenses or adapters and see the image de-squeezed, even if your camera does not do so in-camera. The 2.0x mag mode magnifies the center of your image, allowing you to check the focus of your scaled image.

This feature allows you to flip the image vertically, horizontally, or vertically and horizontally together.

You can zoom one of the images to make it full-screen. You can switch the mark color between red, green, blue, white, and black, depending on the different tone of the subject.

You can enable the filmmaker to check the image from the 1:1 signal source without scaling.

Safely set up your shot with composition markers (80%, 85%, 90%, 93%, 96%, and 2.35:1). You can also switch the mark color between red, green, blue, white, and black.

Frame blanking zone includes six levels, from 0-6 (transparent to black).

• IPS panel with 160° viewing angles
• Aluminum housing
• Sunshade
• 17mm thickness
• 3.5mm earphone slot
• Camera mode
• Image freeze function
• Zoom all function
• Color temperature adjustment
• Flat function key design

Related Questions and Answers

Q: 1. Is this monitor support a 1080 60i signal?

A: This monitor does not list 1080i as a format it supports.

Q: 2. Can I add a Vmount plate to it?

A: Sorry, there is no VESA holes on the back for installing a V mount plate, the H7S has dual F970 battery slots on the back, two battery can last around 10-12 hours.

Q: 3. What's the latency on this monitor while using the composite input?

A: We are not aware of any specific latency specs with this monitor and its composite input. However we believe you should see little to no latency with it.

Q: 4. Does the monitor have false color, peaking, or any other focus assist features built in?

A: Yes, the Lilliput H7S has pixel zoom, level meter, peaking, false color, histogram, H/V delay, exposure, check field, image flip, pixel-to-pixel, markers, aspect ratio, and freeze.

Q: 5. I am experiencing flickering intermittently, it starts and ends on its own. I tried to narrow down the source of the issue by using different power options and different hdmi/sdi cables. How do I resolve this?

A: We highly suggest contacting the manufactures support team for hardware issues. +1-909-598-8118 +1-888-608-3088 Service & RMA: Request Service Address: 130 Commerce Way Walnut, CA 91789

Q: 6. Is this screen glossy or matte? Most of these seem to have glossy screens which are useless in most production environments, especially outdoors.

A: According to Draco Broadcast, LALZE4KDR173 use an IPS screen, is glossy and anti-glare. It has a wide 178 viewing angle.

Q: 7. Does this monitor cross convert SDI to HDMI? If I have an SDI input will it output the video signal to the HDMI port?

A: No. Each input protocol only loops thru to its synonymous output. There is no cross-conversion occurring.

Q: 8. Do these Monitor have the ability to power other devices?

A: No,please buy LILLIPUT T5

Q: 9. I cannot access the marker menu. It is grayed out all the time. I'm using an SDI cable, not sure if I need to do anything. Does anyone have a fix for that?

A: Marks only work for HDMI inputs not SDI inputs.

Q: 10. What are the supplied accessories?

A: Here is a list of what is included in the box with the Lilliput H7 7" 4K HDMI Ultrabright On-Camera Monitor: Tilting Shoe Mount Adapter Tally Cable HDMI Type A to HDMI Type C Cable Micro-HDMI to Mini HDMI Cable Carry Bag Limited 1-Year Warranty