The 10.1" 1280 x 800 3G-SDI HDMI Camera-Top IPS Monitor from Laizeske features a 1280 x 800 resolution and a 16:10 aspect ratio. With a 650 cd/m² brightness output, 800:1 contrast ratio, and 178° vertical and horizontal viewing angles, the IPS panel provides you with a larger image than your camera's built-in viewfinder or LCD screen. The monitor comes with image measurement functions such as Focus Assist, Center Marker, Safe Frame, Check Field, Camera Mode, Aspect Ratio, Image Flip, Pixel-to-Pixel, and Image Freeze. These functions are assignable across six function buttons on the front panel. Prevent strain on your by viewing the built-in camera screen on a larger display. You can monitor the display via 3.5mm stereo headphone jack on the front panel and the built-in speaker.

When the peaking filter is activated, the internal processor displays a colored highlight on the screen where sharp edges appear. It shows red highlight over parts of the monochrome image in focus.

The monitor comes with DB-9 input signal. The front Tally lights with 3-color display are controlled via DB-9 ports on the rear panel.

The monitor is powered from a 4-pin XLR connector or a 12 VDC input with the included power adapter.

Adjust camera color settings using the check field mode, using red, green, blue, or mono pixels to generate the image. Hue and saturation can be adjusted quickly and accurately in this environment.

You can enable the filmmaker to check the image from the 1:1 signal source without scaling.

Safely set up your shot with composition markers (80%, 85%, 90%, 93%, 96%, and 2.35:1).

This feature allows you to flip the image vertically, horizontally, or vertically and horizontally together.

• Camera mode
• Image freeze
• Zoom all (Up/Down and Left/Right zoom)
• Custom color temperature

Related Questions and Answers

Q: 1. Is there a threaded hole on the bottom of the frame for a hot shoe adapter, etc?

A: There are 1/4 -20 screw holes on all four edges.

Q: 2. What is the nit brightness of this monitor?

A: The FeelWorld FW703 7" IPS 3G-SDI 4K HDMI On-Camera Monitor has 450nit brightness.

Q: 3. does the zoom function work on the hdmi output of this monitor?

A: We're afraid not. The output is listed as a loop-through which will output only the signal you input to it.

Q: 4. Does this show the battery life remaining?

A: Yes.

Q: 5. Does this monitor works with the 4.6k file fro the BLackmagic mini pro ?

A: The 4K input for this monitor is HDMI only, the Ursa Mini Pro has SDI outputs only. However the Ursa Mini Pro will allow you to output HD while shooting in 4K, you will be able to use this monitor with the Ursa Mini Pro.

Q: 6. I have canon E6 canon batteries. Do they work with this viewfinder?

A: They do not. This product uses Sony NP-F style batteries. https://bhpho.to/3bxEH2C

Q: 7. Is the FeelWorld FW703 compatible with the Fuji X-t3?

A: Yes, the FeelWorld FW703 7" IPS 3G-SDI 4K HDMI On-Camera Monitor is compatible with the FUJIFILM X-T3 Mirrorless Camera.

Q: 8. What is the recommended 12v power supply?

A: The recommended 12V power supply for the FeelWorld FW703 7" IPS 3G-SDI 4K HDMI On-Camera Monitor is 12V 1.2A or 12V 1.5A.

Q: 9. Is there much lag through a SDI connection ?

A: We are not aware of there being any lag through the SDI Connections on this monitor.

Q: 10. Does this support standard definition input?

A: Yes it does. This monitor rack has a Composite Video Input.