The 7" 1024 x 600 3G-SDI HDMI Camera-Top Field IPS Monitor from Laizeske features a 1024 x 600 resolution and a 16:9 aspect ratio. With a 600 cd/m² brightness output, 800:1 contrast ratio, and 170° vertical and horizontal viewing angles, the IPS panel provides you with a larger image than your camera's built-in viewfinder or LCD screen. The monitor comes with image measurement functions such as Focus Assist, Center Marker, Safe Frame, Check Field, Camera Mode, Image Flip, Pixel-to-Pixel, and Image Freeze. You can monitor the display via 3.5mm stereo headphone jack and the built-in speaker. The monitor is powered using included 12V supply or standard 4-pin XLR.

When the peaking filter is activated, the internal processor displays a colored highlight on the screen where sharp edges appear. It shows red highlight over parts of the monochrome image in focus.

Adjust camera color settings using the check field mode, using red, green, blue, or mono pixels to generate the image. Hue and saturation can be adjusted quickly and accurately in this environment.

You can enable the filmmaker to check the image from the 1:1 signal source without scaling.

Safely set up your shot with composition markers (80%, 85%, 90%, 93%, 96%, and 2.35:1).

This feature allows you to flip the image vertically, horizontally, or vertically and horizontally together.

• Foldable Sunshade
• Six shortcut keys
• Zoom all (Up/Down and Left/Right zoom)
• Custom color temperature
• Image freeze
• SDI and HDMI inputs and loop-through outputs
• Camera mode
• 170° viewing angle
• Wide color gamut LCD panel
• Double function knobs for menu selection and volume control

Related Questions and Answers

Q: 1. Is the 662/S camera mountable (or is additional hardware needed)? What I'm looking for is a camera mountable monitor with HD/SDI BNC inputs that can also cross convert to HDMI out (dual purpose!).

A: Yes, it does.

Q: 2. Is this monitor compatible with canon 5d mark III ? If so, what knd or cable is used to link the monitor with the 5d?

A: The HDMI that is included with this monitor is compatible with my canon 60D. Not knowledgeable about the 5D.

Q: 3. Does it support cross conversion? Input hdmi and output SDI, and vice versa?

A: I'm afraid not. The HDMI and SDI connections will be loop-outs only. If you are looking for an affordable monitor with Cross Conversion you could consider the Lilliput Q5 5.5 , which has Cross Conversion between the HDMI and SDI connections.https://bhpho.to/2qtn7q6

Q: 4. What is the nit brightness of this monitor?

A: The FeelWorld FW703 7" IPS 3G-SDI 4K HDMI On-Camera Monitor has 450nit brightness.

Q: 5. Can I connect this display to SONY EX3 ?

A: Yes, you can use an SDI cable to connect this display to the Sony EX3.

Q: 6. DOES this monitor supports 1080i input/output?

A: Yes, the FeelWorld FW703 7" IPS 3G-SDI 4K HDMI On-Camera Monitor support 1080i input and output. Both HDMI input/output and SDI support 1080i (60/59.94/50).

Q: 7. Does have this FW703 monitor a 12V Power Supply?

A: No, the FeelWorld FW703 7" IPS 3G-SDI 4K HDMI On-Camera Monitor does not come with a power supply.

Q: 8. How does the Anton Bauer battery plate connect to the 662/S? Is there any documentation or pictures that shows how that connection happens?

A: The 662/s has a 2 pins connector on the back case for plugging Anton Bauer mount.

Q: 9. What is the recommended 12v power supply?

A: The recommended 12V power supply for the FeelWorld FW703 7" IPS 3G-SDI 4K HDMI On-Camera Monitor is 12V 1.2A or 12V 1.5A.

Q: 10. Is there a threaded hole on the bottom of the frame for a hot shoe adapter, etc?

A: There are 1/4 -20 screw holes on all four edges.