With built-in ergonomic shoulder pad, 10" sliding track, extra space for accessories in front, VCT14-compatible V-wedge, red buttons and levers all around, and much more, this is the stylish VCT Pro Baseplate from Zacuto. Use it with all types of cameras, from DSLRs to larger models, like the Alexa.

A section of the baseplate extends out beyond the 15mm LWS rod adapter in front. With the rod adapter thus set back, you have additional space to mount accessories under the camera lens, allowing you to position the camera further back on the plate, keeping the balance point of your rig directly over your shoulder. (The rod adapter is vertically adjustable 1", and has to be in a raised position to allow for accessories to be mounted in the additional space. Also, a 1.8" riser for the rod adapter is optionally available for RED cameras by special order from Zacuto.) Also, on the bottom of the section that protrudes out is where the V-wedge is. There is also a 15mm LWS rod adapter on the rear.

The VCT Pro Baseplate features a 10" sliding track, providing the space to optimally adjust balance after every lens change. Moreover, the included red camera plate can be loosened by a spring-loaded lever instead of a screw, so you can make adjustments quickly and easily. To fully release and remove the plate (and camera), just press a red button on the side of the baseplate and slide the plate out. The rod ports also have spring-loaded levers.

An ARRI M6 rosette is available on the front for attaching accessories and grips, and there are also three 1/4"-20 threaded holes on the side providing additional mounting options. 1/4"-20 and 3/8"-16 tripod mount holes are available on the bottom to use instead of the V-wedge. The shoulder pad runs pretty much along the entire length as well as width of the baseplate, and is made of gel polymer. Two 6.5" 15mm rods are included. One 1/4"-20 and one 3/8"-16 screw are supplied for the camera plate. The VCT Pro Baseplate is made in the USA.

Shoulder Rig for Canon C200    360° Adjustable Rosette Dual Handgrips    VCT Pro Baseplate with 15mm Rods    Adjustable Recoil Handle    Top Plate with Multiple Accessory Mounts    Balances Weight of Rig over Shoulder    10" Horizontal / 1" Vertical Adjustment    Slide-In Camera Plate    Made in the USA

• Front rod adapter is set far back, providing more space for accessories, and allowing the camera to be positioned further back for better balance
• 10" sliding track (with spring-loaded lever) for balance adjustment after lens changes
• VCT14-compatible V-wedge
• 1/4"-20 and 3/8"-16 tripod mount holes
• Ergonomic gel polymer shoulder pad
• 15mm LWS rod adapter on the rear
• Front rod adapter is vertically adjustable 1"; optional 1.8" riser available from Zacuto for RED cameras
• ARRI M6 rosette
• Three 1/4"-20 threaded holes for accessories
• Includes two 6.5" 15mm rods
• 1/4"-20 and 3/8"-16 screws supplied
• Made in the USA

Related Questions and Answers

Q: 1. Would this work with the C100 MKI?

A: Yes, the Canon C200 Recoil Pro V2 is compatible with the Canon EOS C100 Digital Cinema Camera.

Q: 2. Are the holes in the extensions 1/4 threaded?

A: From what I am able to gather, Yes they are 1/4 20 threaded.

Q: 3. Is this serious? $850 for this? and it only has I handle? I could understand if it was meant for a heavy camera system and came with 2 handles. This is just insanity.

A: The Zacuto ACT Basic Recoil Rig is made to be of the highest quality systems for the most demanding needs in video production. For reliability and consistent performance, Zacuto's products are trusted by many industry professionals. They are also made in the USA with USA tech support and a lifetime warranty.

Q: 4. is it compatible with sony alpha 7iii?

A: It is not. This is designed specifically for the Sony A7R IV. It is not compatible with the A7III.

Q: 5. Does this unit come with an extension cable to plug the grip into the camera?

A: yes the grip extender contains the appropriate extension cable

Q: 6. Is this the model that's also compatible with the C300 MKIII?

A: Yes it is.

Q: 7. can these be mounted on any rosette or one MUST use the included Zacuto 15mm rod block?

A: Not sure if the rosette is Arri Standard or M2... but you should be able to mount it beyond the Zacuto rod block.

Q: 8. Does the dual grip package include the Z-Finder?

A: No, the Sony FX6 Recoil Rig with Dual Trigger Grips does not include the Z-Finder. The image on our site shows the Zacuto Kameleon EVF Pro ZAZKEVFP mounted. However, that is not included in the kit either.

Q: 9. Does the EVF have waveform and focus peaking?

A: Yes it does. The EVF includes both a waveform and focus peaking.

Q: 10. So the rig comes with the EVF? The picture on B&H has it grayed out.

A: No, The following comes included with the Zacuto ACT Recoil Rig for Sony a7R IV bundle. The EVF is sold separately. Zacuto ACT Baseplate Zacuto ACT Camera Plate 2 x 15mm Rod Limited Lifetime Warranty Zacuto Right-Hand Wood Trigger Grip Limited Lifetime Warranty Zacuto Axis Micro EVF Mount Limited Lifetime Warranty Zacuto Tactical Handle Limited Lifetime Warranty Zacuto Camera Cage for Sony a7R IV Camera Hand Strap HDMI Cable Clamp Camera Mounting Screw Limited Lifetime Warranty