Providing a basic power readout and no user interactive surfaces, the Anton Bauer Titon 90 Gold Mount Lithium-Ion Battery can be used to power your Gold mount camera or other pro video gear. The lightweight lithium-ion chemistry can provide up to 10 amps of current on a continuous draw and support peaks of up to 12.5 amps for five seconds. At the side of the chassis, an LCD display screen shows battery capacity in percent remaining, and when put under load it shows the exact remaining runtime. Using the D-Tap and USB ports you can power essential accessories on your rig or other small electronics.

Titon 90 92Wh Gold Mount Battery    Battery Plate for Canon C300 & C500    Tandem-70 Single Charger & Power Supply    Lithium-Ion, 10A Continuous Draw    D-Tap Outputs on Batteries & Plate    Camera-Mounted AC/DC Failover

For those who prefer a basic battery without multiple display window options and mode selections. Additional information can be accessed and displayed via select Anton Bauer chargers (not included).

The built-in display shows remaining power as percent. When the battery is connected to a camera or light, or otherwise put under load the display changes to show the remaining runtime. This information is available in most professional camera EVFs.

The Titon Gold mount battery supports a continuous 10A total draw between the Gold mount, D-Tap, and USB ports. It will support a 12.5A draw for up to five seconds to accommodate the high-power draw (power inrush) of devices when they start up. The battery capacity is 92Wh.

The battery uses high-quality cells and robust electronics for power distribution and safety.

It has a working temperature range of -4 to 140°F, although temperatures below 40°F can greatly reduce battery performance.

The case is made from an ABS/polycarbonate blend.

The battery can be charged with Dual or Quad Gold mount LP and Performance chargers.

You can also use other Anton Bauer chargers, as well as common competitive chargers; however, not all features and modes may be accessible with these other charges.

Related Questions and Answers

Q: 1. What is the size of the D.C. Power connector on the C300?

A: Standard DC 2.1mm but the Canon version has an additional plastic ring on the outside to lock it in place as a normal 2.1 will eventually bump out of place. The current Anton plate uses a very cheap and awful connector that is no better than a simple 2.1, the old version of this plate used the correct Canon version which held. Also note the camera is 8.4v minimum not 7.2, so if you're using a movcam or similar universal battery plate you need to adjust the voltage regulator higher or it will not power the cam.

Q: 2. How do you reset these batteries?

A: The charger is sold separately. In the accessories on this item, we have a few different charger options that would work with this.

Q: 3. Will this battery work with the older Anton Bauer InterActive 2000 charger?

A: According to Anton Bauer, the Anton Bauer InterActive 2000 (also known as The Q-2702) will work with the Anton Bauer Titon 90 Gold Mount Lithium-Ion Battery, with Firmware: 5.9. Please see Anton Bauer's chart for more details: https://www.antonbauer.com/media/14843/gold-mount_compatibility-matrix_web.pdf

Q: 4. How long will this battery last to power an Arri Alexa Classic EV camera?

A: This is a 99Wh battery. While it will vary depending on how you use a camera, our research tells us that a camera like that may have around an 85 watt draw. You would be looking at around an hour with a battery like this.

Q: 5. What battery plate/bracket can I use to mount this to my camera/tripod? I have the gold mount version.

A: To mount the Anton/Bauer Titon 90 Gold Mount Lithium-Ion Battery to your tripod, the Intellytech SC-AB Battery Plate with Stand Clamp (Gold Mount), B&H # IN176024, would be a good option.

Q: 6. How long will this battery power a Sony FS7 M2K?

A: Depending upon level of operation (i.e. how much zooming, other adjustments, and format of recording), you should be able to count on 3 solid hours, if not a little more.

Q: 7. Can I charge this battery with an interactive charger?

A: Yes, you can charge an Anton Bauer Dionic XT90 Gold Mount Battery with an interactive charger.

Q: 8. Does this work on the C100 mark 1 and or 2? Or does that have a different power consumption?

A: As long as canon hasn't changed the power input plug it should be universal ...Wizz

Q: 9. Does this battery work with other v mount chargers, or only Anton Bauer?

A: You can also use V-Mount Battery Chargers from different brands with this battery. However, not all features and modes may be accessible with other chargers. For best performance Anton Bauer recommends their Performance Series Dual Charger V-Mount, B&H # ANPDC. https://bhpho.to/2NM9tcn

Q: 10. How long will this battey power a sony fs7 m2k?

A: Depending upon level of operation (i.e. how much zooming, other adjustments, and format of recording), you should be able to count on 3 solid hours, if not a little more.