Designed to improve the sound of your camera, the Comica Audio CVM-V01CP is an omnidirectional lavalier microphone with a 3.5mm TRS connector that plugs into the audio input of a DSLR or mirrorless camera. The mic discretely clips onto your clothing to capture clear speech and dialog for YouTube videos, mobile journalism, streaming, and more.

The CVM-V01CP features an omnidirectional pickup pattern that captures sound from every direction, allowing for a variety of placement options and freedom of movement. It comes with a foam windscreen to protect against unwanted wind noise.

For Mobile Journalist, YouTuber    Improved Sound for DSLR Cameras    Omnidirectional Pickup Pattern    19.6' Cable

Related Questions and Answers

Q: 1. HOW DO I MONITOR THE AUDIO RECORDING?

A: Via the 1/8" / 3.5 mm TRS Headphone output port

Q: 2. Works with iphone 11 ?

A: Yes, this kit would be compatible with the iPhone 11.

Q: 3. Does this direct one mic to the left channel and the other to the right or does it mix the two?

A: No, the Comica Audio CVM-D02 Dual Omnidirectional Lavalier Microphones combine the signal from both mics to a dual mono signal so you hear both mics mixed together on the left and right channels, not on separate sides. For a dual lavalier microphone that will route the audio from each mic to a separate channel, consider the Polsen OLM-20 Dual Omnidirectional Lavalier Microphone (B&H # POOLM20).

Q: 4. If I buy two kits with handheld microphones and connect both microphones to a single receiver with the same frequency (both microphones and the receiver), will it work? Will the audio from both microphones be picked up by the same receiver?

A: No, it will not work. You may want to consider the Samson Go Mic Mobile, which does have a two channel receiver, and the system comes with two mics and all accessories, with the exception of the Apple adapter, if you intend to use with an iPhone. https://www.bhphotovideo.com/c/product/1374611-REG/samson_go_mic_mobile_dual.html

Q: 5. Will this work between a mixing board and an android smartphone? Using an auxiliary output from the mixer

A: No, this cable is intended for connecting a dynamic microphone with the input on a smartphone. Since you will be connecting the output from a mixer, which is a louder line level signal (not mic level), you will need to use an attenuator (level matching) cable that will pad the line level signal from the mixer and make it compatible with the mic level input on a smartphone. If you will be connecting from a mixer's XLR output, you will want to send both the left and right output signals so you will need a cable like the Sescom SES-43DB-# 43 dB Pad DSLR Attenuating Line to Mic Level Cable - 18" (B&H # SES43DBMZ2XJ) combined with a USB-C adapter such as the Apple USB Type-C to 3.5mm Headphone Jack Adapter (B&H # APMU7E2AMA) to convert the 3.5mm TRS plug to USB-C. If you have other output options on the mixer, such as RCA (Tape output), you can use the Sescom SES-43DB-# 43 dB Pad DSLR Attenuating Line to Mic Level Cable - 18" (B&H # SES43DBMZ2P). Please

Q: 6. Does the shock mount allow for mounting on a boompole or tripod?

A: Yes, the Comica Audio CVM-VM20 Camera-Mount Shotgun Microphone has a female thread on the bottom of the cold shoe that will allow you to mount the mic onto a boompole, tripod, or stand.

Q: 7. Do I need a windshield foam under this fur one?

A: No, a foam windscreen is not typically used under the Comica Audio CVM-MF1 Furry Wind Muff for Lavalier Microphone.

Q: 8. Will this work with a lightning adapter on an iphone 11?

A: By using the included TRRS adapter from Comica, this will work with an iPhone when being attached to a lighting to headphone jack adapter.

Q: 9. Does this also come with the adapter cable for DSLRs (specifically Canon)?

A: Yes, the 3.5mm TRS to TRRS Cable included with the Comica Audio CVM-VM20 Camera-Mount Shotgun Microphone has automatic TRS/TRRS sensing functionality, making it compatible with most 3.5mm microphone input jacks, including those found on DSLR cameras like the ones made by Canon.

Q: 10. Is the USB Port usable for output as well for connection to desktop?

A: No, the USB port on the CVM-VM20 is for charging only and does not provide audio output signal.