Featuring four independent charge bays, the Core SWX Fleet Micro 3A Digital Quad Charger for V-Mount Batteries is capable of simultaneously charging four batteries at 3A each. This means that four 98Wh batteries can be charged in under 2.5 hours. The on-board LCD display screen allows you to easily monitor your battery's smart battery data without needing to connect to a computer. The micro-USB connector allows for firmware updates and for connection to a computer.

The built-in Battery Management Test mode allows the charger to determine battery health and recharge performance. Activating the SafeFly mode forces the charger to discharge or charge connected batteries to a 30% charge level to meet air travel and shipping requirements. While plugged into an AC power source the Fleet Micro 3A Quad Charger can either charge batteries or be used as a camera power supply via the built-in 4-pin XLR. In the absence of AC power, you can use the charger to feed the 4-pin XLR from connected batteries providing unregulated power. The housing is made of aluminum, providing for a robust build.

4 x HyperCore 150 V-Mount Batteries    Fleet Micro Quad 3A Simultaneous Charger    D-Tap and USB Output Ports on Batteries    4-Pin XLR Power Output on Charger    Up to 10A Continuous Draw    1000 Charge/Discharge Cycles    Overmolded and Rubberized Housing    Status LCDs on Batteries and Charger

• Four independent V-mount charge bays
• Simultaneous charging
• Approximately 2.5-hour charge time for four 98Wh batteries
• 90-240 VAC worldwide compatible input voltage
• Compatible with batteries from RED, Anton Bauer, and others in addition to CoreSWX
• The four-line LCD display screen enables monitoring battery information from the charger
• Hypercine mode allows you to mount up to four batteries to provide unregulated 12 to 16.8 VDC from the charger's 4-pin XLR, without connecting to an AC power supply
• In Hypercine mode the charger's LCD reports back available capacity as well as remaining runtime
• Aluminum build
• Weighs 5 pounds

Related Questions and Answers

Q: 1. Will this work with Sony FX6?

A: Yes, Batteries like the Core SWX Hypercore NEO 9 Mini 98Wh would work with the Sony FX6. However, You will need a Dtap cable or mount that matches the Gold mount of the Core SWX battery. Gold mount battery adapter for the FX6 - Wooden Camera Battery Slide Pro for Sony FX6 (Gold Mount) BH #WO283100 Dtap cable only - SHAPE Regulated D-Tap Power Cable for Sony FX6 (15", 19.5V Out) BH #SHFX6PC

Q: 2. Can this battery legally travel airborne?

A: You will want to check with your airline directly as restrictions on batteries frequently change. At this time you can travel with batteries that are above 100 Wh, you may just need to first get approval from the airline.

Q: 3. Core SWX HyperCore NEO 150 Mini got d-tap output?

A: Yes, the Core SWX Hypercore NEO 150 Mini 147Wh Lithium-Ion Battery (Gold Mount) offers 1 x D tap port for power out.

Q: 4. Can i power my bmpcc 6k and my 7" bm video assist 12hdr monitor?

A: Both of them can be powered using this battery, but not simultaneously as there is only one D-Tap output on the battery.

Q: 5. Can these power the ikan Rayden RB5 Bi-Color Half x 1 Studio & Field LED Lights?

A: Yes, the Core SWX Hypercore NEO 9 Mini 98Wh 2-Battery Kit with Dual Charger (Gold Mount) can be used to power the ikan Rayden RB5 Bi-Color Half x 1 Studio & Field LED Light using the light's included gold mount plate.

Q: 6. Would you recommend this battery for use on the the Aperture LightStorm LS 1c?

A: You could use this battery on the Aputure Light Storm LS 1C V-Mount Version, B&H #APLS1CV. This is a high capacity battery at 150Wh, so it would be a very good choice for the light.

Q: 7. Could I charge this (147Wh version) with the charger from "IndiPRO Tools 2 x Micro-Series 98Wh Li-Ion V-Mount Batteries with Dual V-Mount Battery Charger Kit" ?

A: We do not recommend using other manufacturers chargers for different batteries because the circuitry for each manufacturer is unique and could cause damages for your battery/charger. Although you are able to provide charge from the IndiPRO charge to the CoreSWX battery, your mileage may vary and may cause product damage.

Q: 8. Can I use the "Core SWX PB70C15 D-Tap Wall Charger" to charge this battery?

A: Yes you can. BH #COPB70C15 will work to charge this battery. https://bhpho.to/3bpbCpq

Q: 9. Can these take a charge via the P-tap?

A: According to the The V-plate adapter manual there's no pass through to charge via P-TAP. I'm guessing this would be the same. You'd have to call the manufacturer to confirm.

Q: 10. Can you charge this with the USB port?

A: No, the USB is just an ouput.